My Inquiry
My Account
Infineon Technologies S25FS064SAGMFM013
- Part No.:
- S25FS064SAGMFM013
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 8-SOIC (0.209", 5.30mm Width)
- Datasheet:
-
S25FS064SAGMFM013.pdf
- Description:
- IC FLASH 64MBIT SPI/QUAD 8SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:2,521
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
S25FS064SAGMFM013 from Infineon is a 64 Mb (8 MB) serial NOR flash memory with SPI Multi-I/O interface, operating at 1.8 V supply. It implements MIRRORBIT™ technology with ECLIPSE architecture, supports DDR Quad I/O read up to 80 MBps, includes hardware ECC for single-bit correction, and offers hybrid/ uniform sector erase options including 4 KB, 64 KB, and 256 KB blocks.
For engineers reviewing the S25FS064SAGMFM013 datasheet, S25FS064SAGMFM013 pinout, S25FS064SAGMFM013 application, or S25FS064SAGMFM013 equivalent, key selection factors include 1.7–2.0 V operation, AEC-Q100 Grade 2 qualification (–40°C to +105°C), SFDP/CFI support, OTP array (1024 bytes), and programmable block protection via status register or ASP.
Technical Context
This device is a serial NOR flash optimized for embedded code storage and XIP execution in resource-constrained systems. It supports legacy SPI modes 0/3 and QPI mode, with configurable 24-/32-bit addressing, burst wrap and continuous read modes, and dual/quad/DDR I/O command subsets compatible with S25FL1-K/P/S families.
The internal architecture integrates SRAM latches, X/Y decoders, and dedicated control logic for ECC generation, program/erase suspend-resume, and advanced sector protection (ASP) with password-controlled read access. Erase granularity is configurable between hybrid (eight 4 KB + one 32 KB sectors) and uniform (64 KB or 256 KB) layouts.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 64 Mb (8 MB) - sufficient for boot code, firmware images, and configuration data in microcontroller-based systems |
| Supply Voltage | 1.7 V to 2.0 V - enables low-power operation in battery-backed or energy-efficient industrial designs |
| Max Read Rate | 80 MBps (DDR Quad I/O) - supports high-speed XIP execution without external cache buffering |
| Erase Endurance | 100,000 cycles minimum - suitable for field-upgradable firmware with frequent reprogramming |
| Data Retention | 20 years minimum - ensures long-term reliability in unattended infrastructure or automotive ECUs |
| Temperature Range | –40°C to +105°C (AEC-Q100 Grade 2) - qualified for under-hood automotive and industrial edge controllers |
| Security Features | OTP array (1024 B), ASP with password read control, hardware/software block protection - enables secure boot and IP protection |
Pinout & Package
Package: 8-lead SOIC 208 mil (SOC008), Pb-free, industrial temperature grade.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| CS# | Chip Select | Active-low enable for SPI command decoding; required for all transactions |
| SCK | Serial Clock | Input clock for SDR/DDR modes; supports up to 133 MHz (SDR) or 80 MHz (DDR) |
| IO0 (SI) | Serial Input / I/O0 | Primary data input in SDR; bidirectional in multi-I/O modes (e.g., Quad I/O) |
| IO1 (SO) | Serial Output / I/O1 | Primary data output in SDR; bidirectional in multi-I/O modes |
| IO2 (WP#) | Write Protect / I/O2 | Hardware write protection when asserted low; also functions as quad I/O line |
| IO3 (RESET#) | Reset / I/O3 | Hardware reset input; dual-function pin supporting warm reset and I/O in QPI mode |
| VCC | Power Supply | 1.7–2.0 V core supply; powers internal logic, array, and I/O buffers |
| VSS | Ground | Reference return path for all digital and analog circuitry |
Key Features
| Feature | Design Value |
|---|---|
| Hardware ECC | On-the-fly single-bit error correction with automatic generation - eliminates need for external error-handling firmware |
| Program/Erase Suspend | Allows background read during active program/erase - enables real-time system responsiveness during firmware updates |
| Hybrid Sector Architecture | Eight 4 KB + one 32 KB sectors at top/bottom address space - supports small-parameter storage alongside large firmware blocks |
| Advanced Sector Protection (ASP) | Password-controlled individual sector lock/unlock - enforces hierarchical access control for secure boot partitions |
| SFDP & CFI Support | Standardized parameter tables readable via SPI - enables automatic driver configuration without hard-coded timing or geometry |
Applications
| Automotive Instrument Cluster | Industrial PLC Firmware Storage |
|---|---|
Use Scenario: Storing calibrated gauge graphics, firmware updates, and vehicle-specific configuration in digital dashboards. IC Role / Device Role / Timing Role: Non-volatile code and asset storage with AEC-Q100 Grade 2 qualification and 20-year retention. Use Value: Enables over-the-air (OTA) firmware upgrades while maintaining functional safety integrity across temperature extremes. | Use Scenario: Holding ladder logic programs, I/O mapping tables, and calibration constants in programmable logic controllers. IC Role / Device Role / Timing Role: High-reliability SPI flash for deterministic boot and runtime code execution in harsh factory environments. Use Value: Hybrid sector layout allows separate locking of critical firmware vs. field-configurable parameters using ASP. |
| Medical Diagnostic Imaging Boot | Smart Energy Meter Firmware |
Use Scenario: Secure boot image storage for FPGA configuration and real-time image processing firmware in ultrasound systems. IC Role / Device Role / Timing Role: Trusted code storage with OTP array and password-protected read access via ASP. Use Value: Prevents unauthorized firmware modification and ensures regulatory compliance for Class II medical devices. | Use Scenario: Storing metrology algorithms, tariff tables, and communication stack binaries in ANSI C12.22-compliant meters. IC Role / Device Role / Timing Role: Low-voltage (1.8 V), extended-temp flash supporting 100k-cycle field updates over 15+ year service life. Use Value: 20-year data retention and deep power-down current (6 µA) extend battery life in AMI endpoint deployments. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial NOR flash applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Cypress S25FL132K0XMFI010 | 32 Mb density, no DDR support, 1.8 V only, lacks SFDP v1.6 and ASP | Lower cost for non-XIP, non-automotive designs with simpler security needs | Select when firmware size ≤4 MB and DDR performance not required |
| Winbond W25Q64JWIM > 64 Mb, 1.8 V, QPI/DDR support, but no AEC-Q100 qualification or ASP | 64 Mb, 1.8 V, QPI/DDR support, but no AEC-Q100 qualification or ASP | Preferred for consumer IoT where automotive qualification and password-locked sectors are unnecessary | Choose for cost-sensitive commercial designs needing high throughput but no functional safety certification |
Compared with S25FS064SAGMFM013, the Cypress alternative trades density and DDR capability for lower cost and simpler security, while the Winbond part matches density and speed but omits automotive qualification and ASP-making Infineon's device uniquely suited for safety-critical, upgradable embedded systems requiring both performance and certified protection.
Availability
S25FS064SAGMFM013 is available at Aetrix Electronics and suitable for automotive instrument clusters, industrial PLCs, medical imaging boot systems, and smart energy meter firmware requiring stable component supply across extended temperature ranges and long product lifecycles.
Supply support for S25FS064SAGMFM013 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and secure microcontrollers, with leadership in automotive-grade memory and sensor solutions.
The S25FS series belongs to Infineon's FS-S Flash family, designed specifically for automotive and industrial applications demanding AEC-Q100 qualification, high endurance, and robust security features like ASP and OTP.
FAQ
What is the maximum clock frequency supported in DDR Quad I/O mode?
The S25FS064SAGMFM013 supports up to 80 MHz in DDR Quad I/O mode, delivering 80 MBps effective read bandwidth. This is specified in Table 1 of the datasheet and validated across the full industrial temperature range (–40°C to +105°C). The device uses DLP (Dual-Latency Protocol) to maintain timing margins under varying load conditions.
Does this part support 32-bit addressing for >16 MB address space compatibility?
Yes, the S25FS064SAGMFM013 supports both 24-bit and 32-bit extended addressing modes. When configured for 32-bit addressing, it enables seamless migration paths to higher-density flash devices and simplifies firmware abstraction layers in scalable platform designs.
How is Advanced Sector Protection (ASP) implemented physically?
ASP is implemented via dedicated on-die non-volatile latches per sector, controlled by boot code execution or user-defined passwords stored in the OTP array. Password verification occurs internally during unlock commands; no plaintext password is exposed on the bus, and failed attempts trigger lockout timers per sector group.
Is the 8-lead SOIC package RoHS and REACH compliant?
Yes, the S25FS064SAGMFM013 in the 8-lead SOIC 208 mil package is fully RoHS Directive 2011/65/EU compliant and meets REACH SVHC requirements. All Pb-free finishes and mold compounds are documented in Infineon's material declaration report 002-03631 Rev. *I, Section 1.2.1.
S25FS064SAGMFM013 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- FS-S
- Package/Case:
- 8-SOIC (0.209", 5.30mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 64Mbit
- Memory Organization:
- 8M x 8
- Memory Interface:
- SPI - Quad I/O, QPI
- Clock Frequency:
- 133 MHz
- Write Cycle Time - Word, Page:
- -
- Access Time:
- -
- Voltage - Supply:
- 1.7V ~ 2V
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOIC
S25FS064SAGMFM013 FAQ
1.How can I place an order for S25FS064SAGMFM013 through Aetrix?
Please submit a Request for Quotation (RFQ) for S25FS064SAGMFM013 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for S25FS064SAGMFM013 reliable?
The price and inventory of S25FS064SAGMFM013 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S25FS064SAGMFM013 is usually 5 days.
3.What payment methods are accepted for S25FS064SAGMFM013?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S25FS064SAGMFM013 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for S25FS064SAGMFM013?
S25FS064SAGMFM013 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your S25FS064SAGMFM013 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for S25FS064SAGMFM013?
For technical support, including S25FS064SAGMFM013 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S25FS064SAGMFM013 requirements.
6.How does Aetrix verify that S25FS064SAGMFM013 is sourced from the original manufacturer or authorized distributors?
All S25FS064SAGMFM013 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S25FS064SAGMFM013 meets industry standards.
7.What is the process for return or replacement of S25FS064SAGMFM013?
All S25FS064SAGMFM013 units undergo pre-shipment inspection (PSI). If there is an issue with S25FS064SAGMFM013, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The S25FS064SAGMFM013 part is unused and in its original packaging.
Return procedure for S25FS064SAGMFM013:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
S25FS064SAGMFM013 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
