My Inquiry
My Account
Infineon Technologies S25HS512TDPMHI010
- Part No.:
- S25HS512TDPMHI010
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 16-SOIC (0.295", 7.50mm Width)
- Datasheet:
-
S25HS512TDPMHI010.pdf
- Description:
- IC FLASH 512MBIT SPI/QUAD 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:228
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
S25HS512TDPMHI010 from Infineon is a 512-Mbit serial NOR flash memory with octal DTR interface, 1.8 V supply voltage, 200 MHz read frequency, and 4-KB uniform sector erase capability. It serves as non-volatile program/data storage in automotive ADAS controllers requiring AEC-Q100 Grade 2 qualification.
For engineers reviewing the S25HS512TDPMHI010 datasheet, S25HS512TDPMHI010 pinout, S25HS512TDPMHI010 application, or S25HS512TDPMHI010 equivalent, key selection criteria include octal DTR timing compliance, AEC-Q100 Grade 2 reliability, 1.8 V operation, and 4-KB sector granularity for firmware update partitioning.
Technical Context
This device implements an octal double-data-rate (DTR) SPI interface supporting x8 I/O bus width and DDR read commands at up to 200 MHz, delivering 400 MB/s effective throughput. It integrates a 4-KB uniform sector architecture with independent sector lock bits and hardware write protection.
The memory supports standard SPI opcodes plus extended octal DTR commands including fast read, quad/octal DTR read, and program/erase suspend/resume. Internal ECC corrects single-bit errors and detects double-bit errors per 512-byte page.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 512 Mbit (64 MB) - supports full boot image + application firmware in single device |
| Interface Type | Octal DTR SPI - enables 400 MB/s read bandwidth for real-time code execution |
| Supply Voltage | 1.71–1.95 V - compatible with automotive 1.8 V power rails and low-power SoC interfaces |
| Read Frequency | 200 MHz DDR - achieves maximum sustained read speed under AEC-Q100 thermal stress |
| Erase Granularity | 4 KB uniform sectors - allows atomic firmware patch updates without erasing entire bank |
| Qualification | AEC-Q100 Grade 2 (−40°C to +105°C) - validated for engine bay and ADAS ECU deployment |
| ECC Support | On-die SEC-DED - corrects single-bit errors and flags uncorrectable double-bit errors per page |
Pinout & Package
Package: 24-pin WSON (6 mm × 8 mm, 0.5 mm pitch) with wettable flank leads for automated optical inspection.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VIO/VCC | Core I/O supply | 1.8 V input powering all interface logic and command decoding circuitry |
| GND | Ground reference | Common return path for I/O and core circuits; tied to PCB ground plane |
| IO0–IO7 | Octal bidirectional data lines | Support DDR read/write transfers; require controlled impedance routing |
| CLK | Input clock | Accepts 200 MHz differential-capable single-ended clock for DTR timing alignment |
| WP# | Write protect input | Hardware-level sector lock override when asserted low during programming |
| HOLD# | Command hold input | Pauses ongoing read/program/erase operations without bus release |
Key Features
| Feature | Design Value |
|---|---|
| Octal DTR interface | Enables 400 MB/s read throughput without parallel bus complexity or pin count penalty |
| 4-KB uniform sector architecture | Permits fine-grained firmware updates and reduces risk of corruption during partial reprogramming |
| AEC-Q100 Grade 2 qualification | Validated for continuous operation at 105°C ambient in automotive engine control modules |
| On-die SEC-DED ECC | Eliminates need for external error correction logic in safety-critical boot memory paths |
| Hardware write protection | Prevents accidental overwrite of boot loader or calibration data via dedicated WP# pin |
Applications
| ADAS Camera Module | Automotive Gateway ECU |
|---|---|
Use Scenario: Stores camera ISP firmware and calibration tables in rear-view and surround-view systems. IC Role / Device Role / Timing Role: Non-volatile boot and runtime code storage with deterministic 200 MHz DDR read latency. Use Value: Enables fast cold-boot (<500 ms) and supports over-the-air firmware patches using 4-KB sector erase. | Use Scenario: Hosts gateway middleware, CAN FD protocol stacks, and secure boot keys. IC Role / Device Role / Timing Role: Trusted execution environment (TEE) code storage with hardware write protection and ECC integrity. Use Value: Meets ISO 21434 cybersecurity requirements via on-die ECC and sector-lock isolation. |
| Engine Control Unit (ECU) | Infotainment Head Unit |
Use Scenario: Stores engine map data, diagnostic logs, and fail-safe calibration parameters. IC Role / Device Role / Timing Role: AEC-Q100 Grade 2 persistent memory for real-time control loop data retention. Use Value: Guarantees data integrity across 10,000+ thermal cycles in under-hood environments. | Use Scenario: Holds Android Automotive OS kernel, HAL drivers, and UI assets. IC Role / Device Role / Timing Role: High-bandwidth code storage enabling direct XIP (execute-in-place) from flash. Use Value: Reduces DRAM footprint by allowing critical boot code to execute directly from octal DTR interface. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial NOR flash applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| CY15B104QN-PSOC | 4-Mbit density, FRAM technology, no erase cycles required, 1.8 V operation | Lower density limits use to parameter storage only; no firmware storage capability | Select only for infrequent configuration data logging where endurance >10¹⁴ cycles is mandatory |
| S25HS256TDPNHI010 | 256-Mbit density, identical octal DTR interface and AEC-Q100 Grade 2 rating | Half capacity requires dual-die layout or reduced feature set in same footprint | Choose when system firmware size fits within 32 MB and BOM cost optimization is prioritized |
Compared with CY15B104QN-PSOC and S25HS256TDPNHI010, the S25HS512TDPMHI010 uniquely balances 64 MB capacity, octal DTR bandwidth, and automotive-grade reliability-enabling single-chip boot + application storage without compromising update granularity or thermal robustness.
Availability
S25HS512TDPMHI010 is available at Aetrix Electronics and suitable for automotive ADAS modules, engine control units, and infotainment head units requiring stable component supply and long-term lifecycle assurance.
Supply support for S25HS512TDPMHI010 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive microcontrollers, and secure connectivity solutions.
This device belongs to the Semper™ family of automotive-qualified NOR flash memories, designed specifically for high-reliability code storage and firmware updates in safety-critical vehicle ECUs.
FAQ
What is the maximum clock frequency supported in octal DTR mode?
The S25HS512TDPMHI010 supports up to 200 MHz in octal DTR mode, delivering 400 MB/s effective read bandwidth. This frequency is specified under AEC-Q100 Grade 2 conditions (−40°C to +105°C) with 1.8 V supply and proper signal integrity layout.
Does this part support execute-in-place (XIP) operation?
Yes, the S25HS512TDPMHI010 supports XIP mode via its octal DTR interface, enabling CPU instruction fetch directly from flash without loading into RAM. The 200 MHz DDR timing ensures low-latency instruction access for real-time automotive software.
How is hardware write protection implemented?
Hardware write protection is controlled by the dedicated WP# pin: when pulled low, it disables all program and erase commands globally. Sector lock bits can also be set individually via status register writes, providing hierarchical protection for boot code and calibration data.
Is on-die ECC enabled by default after power-up?
Yes, on-die SEC-DED ECC is always active upon power-on reset and cannot be disabled. It operates transparently across all read operations, correcting single-bit errors and flagging double-bit errors in the status register without software intervention.
S25HS512TDPMHI010 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- HS-T
- Package/Case:
- 16-SOIC (0.295", 7.50mm Width)
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 512Mbit
- Memory Organization:
- 64M x 8
- Memory Interface:
- SPI - Quad I/O
- Clock Frequency:
- 133 MHz
- Write Cycle Time - Word, Page:
- -
- Access Time:
- -
- Voltage - Supply:
- 1.7V ~ 2V
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
S25HS512TDPMHI010 FAQ
1.How can I place an order for S25HS512TDPMHI010 through Aetrix?
Please submit a Request for Quotation (RFQ) for S25HS512TDPMHI010 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for S25HS512TDPMHI010 reliable?
The price and inventory of S25HS512TDPMHI010 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S25HS512TDPMHI010 is usually 5 days.
3.What payment methods are accepted for S25HS512TDPMHI010?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S25HS512TDPMHI010 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for S25HS512TDPMHI010?
S25HS512TDPMHI010 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your S25HS512TDPMHI010 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for S25HS512TDPMHI010?
For technical support, including S25HS512TDPMHI010 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S25HS512TDPMHI010 requirements.
6.How does Aetrix verify that S25HS512TDPMHI010 is sourced from the original manufacturer or authorized distributors?
All S25HS512TDPMHI010 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S25HS512TDPMHI010 meets industry standards.
7.What is the process for return or replacement of S25HS512TDPMHI010?
All S25HS512TDPMHI010 units undergo pre-shipment inspection (PSI). If there is an issue with S25HS512TDPMHI010, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The S25HS512TDPMHI010 part is unused and in its original packaging.
Return procedure for S25HS512TDPMHI010:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
S25HS512TDPMHI010 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
