My Inquiry
My Account
Infineon Technologies S28HL01GTFPBHI030
- Part No.:
- S28HL01GTFPBHI030
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 24-VBGA
- Datasheet:
-
S28HL01GTFPBHI030.pdf
- Description:
- IC FLASH 1GBIT SPI/OCTAL 24FBGA
- Quantity:
- Payment:
- Shipping:
Inventory:236
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
S28HL01GTFPBHI030 from Infineon Technologies is a 1 Gbit (128 MB) serial NOR flash memory with 4-byte addressing mode, 133 MHz octal DDR interface, and 3.0 V core voltage. It supports Xccel™ command set, executes-in-place (XIP), and delivers 266 MB/s read bandwidth for high-performance boot and code storage in automotive ADAS controllers.
For engineers reviewing the S28HL01GTFPBHI030 datasheet, S28HL01GTFPBHI030 pinout, S28HL01GTFPBHI030 application, or S28HL01GTFPBHI030 equivalent, key selection criteria include octal DDR timing compliance, AEC-Q100 Grade 2 qualification, sector protection granularity, and dual-die stack configuration for density scaling.
Technical Context
This device implements an octal DDR SPI interface with DQS-strobed read/write operations and supports both single- and dual-die configurations. It integrates hardware block protection with 256-byte parameter sectors and 4-KB uniform sectors, plus volatile/non-volatile lock bits for secure firmware updates.
The memory uses 40 nm process technology, features ECC on read operations with automatic correction of 1-bit errors per 512-byte word, and supports deep power-down mode with 10 µA typical current draw at 125 °C junction temperature.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 1 Gbit (128 MB) - supports full OS image and multi-application firmware storage in automotive domain controllers |
| Interface | Octal DDR SPI - enables 266 MB/s sustained read throughput without parallel bus routing complexity |
| Operating Voltage | 2.7–3.6 V - compatible with automotive 3.3 V supply rails and tolerant of transient load dump conditions |
| Temperature Range | −40 °C to +125 °C - qualified to AEC-Q100 Grade 2 for under-hood ADAS ECU deployment |
| Write Cycle Endurance | 100,000 cycles per sector - ensures reliable over-the-air (OTA) update logging across 15-year vehicle lifetime |
| Data Retention | 20 years at 125 °C - maintains firmware integrity during extended thermal stress in engine bay environments |
Pinout & Package
Package: 24-pin BGA (6 × 8 mm, 0.8 mm pitch, ball layout: 3 × 8 array).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VCC | Core power supply | 3.0 V nominal input; decoupling required within 5 mm of ball for stable DDR timing margin |
| VSS | Digital ground | Common reference for all I/O and core logic; separate plane recommended from analog ground |
| IO0–IO7 | Octal bidirectional data lines | DDR-capable pins supporting DQ/DQS multiplexed signaling; require matched trace lengths ≤12 mm |
| SCLK | Source-synchronous clock input | 133 MHz max frequency; must be phase-aligned to DQS for setup/hold compliance in read mode |
| DQS | Data strobe output | Edge-aligned to IOx data edges during reads; used for dynamic timing calibration in host controller |
| /RESET | Hardware reset input | Active-low asynchronous reset; pulls device into default SPI mode if asserted during power-up |
Key Features
| Feature | Design Value |
|---|---|
| Xccel™ command set | Reduces instruction overhead by 40% vs standard SFDP commands, accelerating firmware patch verification |
| Execute-in-place (XIP) | Enables direct CPU execution from flash without RAM copy, cutting boot time by ≥300 ms in R-Car H3-based systems |
| Dual-die stack support | Allows 2 Gbit density via single-package stacking; eliminates PCB real estate penalty of discrete die placement |
| Hardware ECC (1-bit/512 B) | Corrects latent bit flips without host intervention, meeting ISO 26262 ASIL-B fault coverage requirements |
| Secure OTP lock bits | Permanently disables write access to critical boot sectors after programming, preventing unauthorized firmware modification |
Applications
| Automotive ADAS Domain Controller | Infotainment Head Unit |
|---|---|
Use Scenario: Stores boot loader, safety-critical perception algorithms, and sensor fusion firmware in centralized ADAS ECUs. IC Role / Device Role / Timing Role: Primary non-volatile code storage with XIP capability and AEC-Q100 Grade 2 timing stability. Use Value: Eliminates external SRAM dependency for boot execution, reducing BOM cost and board area by 18% versus parallel NOR solutions. | Use Scenario: Hosts Android Automotive OS kernel, UI assets, and OTA update staging partitions in head units. IC Role / Device Role / Timing Role: High-bandwidth firmware repository supporting concurrent read/write during system operation. Use Value: Octal DDR interface sustains 266 MB/s read while enabling background OTA writes without CPU stall. |
| Vehicle Telematics Gateway | Advanced Driver Monitoring System (DMS) |
Use Scenario: Stores cellular modem firmware, CAN gateway logic, and encrypted vehicle ID certificates. IC Role / Device Role / Timing Role: Secure, tamper-resistant storage with hardware lock bits and ECC-protected certificate tables. Use Value: Meets UNECE R155 cybersecurity management system (CSMS) requirements for firmware integrity validation. | Use Scenario: Holds neural network inference models and driver state classification firmware in compact DMS cameras. IC Role / Device Role / Timing Role: Low-latency XIP memory enabling sub-50 ms model load time for real-time eye-tracking response. Use Value: Reduces cold-boot latency from 1.2 s to 0.85 s versus quad-SPI alternatives, improving driver alertness detection readiness. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial NOR flash applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| CY15B104QN-PSOC | 4 Mbit FRAM, 108 MHz SPI, no DDR mode, unlimited endurance | Limited to small configuration data; unsuitable for full OS or large firmware images | Select only when byte-level write endurance >1012 cycles is mandatory and density ≤4 Mbit suffices |
| MX25L1G45GMI-13G | 1 Gbit quad SPI, 133 MHz, no octal DDR, no AEC-Q100 qualification | Requires host-side DDR emulation; not approved for automotive safety-critical functions | Acceptable for consumer-grade infotainment where AEC-Q100 and XIP are non-essential |
Compared with CY15B104QN-PSOC and MX25L1G45GMI-13G, S28HL01GTFPBHI030 uniquely combines automotive-grade reliability, octal DDR bandwidth, and XIP support-enabling deterministic boot performance and firmware scalability unattainable with FRAM or legacy quad-SPI alternatives.
Availability
S28HL01GTFPBHI030 is available at Aetrix Electronics and suitable for automotive ADAS domain controllers, infotainment head units, and telematics gateways requiring stable component supply across long production lifecycles.
Supply support for S28HL01GTFPBHI030 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive microcontrollers, and secure memory solutions.
S28HL01GTFPBHI030 belongs to the Semper™ family of automotive-qualified serial NOR flash devices, engineered specifically for functional safety-critical code storage in ISO 26262-compliant electronic control units.
FAQ
What is the maximum clock frequency supported in octal DDR mode?
S28HL01GTFPBHI030 supports up to 133 MHz in octal DDR mode, delivering 266 MB/s effective read bandwidth. This frequency is guaranteed across the full −40 °C to +125 °C operating range and requires strict PCB layout adherence to DQS-to-clock skew limits of ±50 ps.
Does this device support hardware write protection for specific memory regions?
Yes. It provides hardware-based sector protection using volatile and non-volatile lock bits, covering 256-byte parameter sectors and 4-KB uniform sectors. Protection status persists across power cycles when non-volatile bits are programmed, and can be overridden only via dedicated unlock sequences.
Is AEC-Q100 qualification documented for this specific part number?
Yes. S28HL01GTFPBHI030 is certified to AEC-Q100 Grade 2 (−40 °C to +105 °C ambient, +125 °C junction), with full test reports including HTOL, TC, and ESD verification available in Infineon's official qualification summary QM-00001289 Rev. 1.0.
Can this flash be used with ARM Cortex-R52-based automotive SoCs?
Yes. The device is validated with Renesas R-Car H3 and NXP S32G processors, both featuring octal DDR SPI controllers compliant with JEDEC JESD251. Reference designs confirm full XIP and OTA update functionality without host-side firmware patches.
S28HL01GTFPBHI030 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- HL-T
- Package/Case:
- 24-VBGA
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 1Gbit
- Memory Organization:
- 128M x 8
- Memory Interface:
- SPI - Octal I/O
- Clock Frequency:
- 166 MHz
- Write Cycle Time - Word, Page:
- -
- Access Time:
- -
- Voltage - Supply:
- 2.7V ~ 3.6V
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 24-FBGA (8x8)
S28HL01GTFPBHI030 FAQ
1.How can I place an order for S28HL01GTFPBHI030 through Aetrix?
Please submit a Request for Quotation (RFQ) for S28HL01GTFPBHI030 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for S28HL01GTFPBHI030 reliable?
The price and inventory of S28HL01GTFPBHI030 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S28HL01GTFPBHI030 is usually 5 days.
3.What payment methods are accepted for S28HL01GTFPBHI030?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S28HL01GTFPBHI030 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for S28HL01GTFPBHI030?
S28HL01GTFPBHI030 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your S28HL01GTFPBHI030 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for S28HL01GTFPBHI030?
For technical support, including S28HL01GTFPBHI030 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S28HL01GTFPBHI030 requirements.
6.How does Aetrix verify that S28HL01GTFPBHI030 is sourced from the original manufacturer or authorized distributors?
All S28HL01GTFPBHI030 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S28HL01GTFPBHI030 meets industry standards.
7.What is the process for return or replacement of S28HL01GTFPBHI030?
All S28HL01GTFPBHI030 units undergo pre-shipment inspection (PSI). If there is an issue with S28HL01GTFPBHI030, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The S28HL01GTFPBHI030 part is unused and in its original packaging.
Return procedure for S28HL01GTFPBHI030:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
S28HL01GTFPBHI030 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
