My Inquiry
My Account
Infineon Technologies S29JL032J60TFI013
- Part No.:
- S29JL032J60TFI013
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 48-TFSOP (0.724", 18.40mm Width)
- Datasheet:
-
S29JL032J60TFI013.pdf
- Description:
- IC FLASH 32MBIT PARALLEL 48TSOP
- Quantity:
- Payment:
- Shipping:
Inventory:2,042
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
S29JL032J60TFI013 from Infineon Technologies (formerly Cypress) is a 32-Mb simultaneous read/write flash memory organized as 4M × 8-bit or 2M × 16-bit, operating at 3.0 V only, with 60 ns access time, four-bank architecture, and boot sector configuration. It enables zero-latency background erase/program while reading from another bank, and integrates Secured Silicon Region (256 B OTP), hardware write protection (WP#/ACC), and JEDEC CFI compliance - deployed in industrial control firmware storage and automotive infotainment boot code modules.
For engineers reviewing the S29JL032J60TFI013 datasheet, S29JL032J60TFI013 pinout, S29JL032J60TFI013 application, or S29JL032J60TFI013 equivalent, key selection criteria include simultaneous bank operation support, 100K erase/program cycles per sector, 20-year data retention, 200 nA standby current, and TSOP-48/FBGA-48 package compatibility for legacy board redesigns.
Technical Context
The S29JL032J60TFI013 implements a true dual-bank (or quad-bank) flash architecture where program/erase operations in one bank occur concurrently with read access to another, eliminating wait states. Its command interface fully complies with JEDEC 42.4 single-power-supply Flash standards, supporting CFI queries, erase suspend/resume, and autoselect mode for device identification.
Hardware features include RY/BY# status output, RESET# pin for state machine reset, WP#/ACC pin enabling both write protection and accelerated programming, and BYTE# control for 8-/16-bit mode selection. Internal charge pumps generate required high voltages for erase/program, eliminating external VPP.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 32 Mb (4,194,304 × 8-bit or 2,097,152 × 16-bit) |
| Access Time (tACC) | 60 ns - determines minimum clock cycle for reliable read timing in high-speed microcontroller interfaces |
| Supply Voltage | 3.0 V to 3.6 V - single supply eliminates need for separate VCC/VPP rails in embedded systems |
| Erase Endurance | 100,000 cycles per sector - supports field firmware updates over full product lifecycle |
| Data Retention | 20 years typical - ensures long-term reliability in unpowered storage applications |
| Standby Current | 200 nA - enables ultra-low-power operation during system sleep modes |
| Program Time | 6 µs/word typical with acceleration - reduces firmware update duration in production programming |
Pinout & Package
Package: 48-ball Fine-pitch BGA (VBK048) and 48-pin TSOP (TS 048). Pin functions are identical across packages; ball/pin numbering differs per mechanical layout.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| CE# | Chip Enable | Active-low enable for all operations; controls bus contention and power gating |
| WE# | Write Enable | Active-low strobe for command and data writes; defines write cycle timing window |
| OE# | Output Enable | Active-low control for data bus drivers; enables read data output without affecting internal state |
| RY/BY# | Ready/Busy Output | Open-drain status signal indicating active erase/program; used for hardware polling |
| RESET# | Hardware Reset | Forces device into read mode and aborts ongoing erase/program; critical for recovery after power loss |
| WP#/ACC | Write Protect / Acceleration Input | Dual-function pin: low = protect boot sectors; high = enable faster programming timing |
| BYTE# | Bus Width Select | High = 16-bit mode (DQ15–DQ0); low = 8-bit mode (DQ7–DQ0); configures data path width at power-up |
Key Features
| Feature | Design Value |
|---|---|
| Simultaneous Read/Write | Zero-latency concurrent access across banks - eliminates CPU stalls during firmware updates |
| Secured Silicon Region | 256-byte OTP sector with factory-locked ESN and customer-lockable code area - enables secure boot key storage |
| Erase Suspend/Resume | Pause erase to read/program non-target sectors - supports real-time interrupt handling during flash maintenance |
| Hardware Sector Protection | Independent lock/unlock of any sector via WP# or command - prevents accidental corruption of boot code |
| Automatic Sleep Mode | Enters <200 nA state after address stability - reduces power in always-on embedded gateways |
Applications
| Industrial PLC Firmware Storage | Automotive Infotainment Boot Memory |
|---|---|
|
Use Scenario: Storing and updating ladder logic firmware in programmable logic controllers with runtime diagnostics. IC Role / Device Role / Timing Role: Non-volatile code storage with in-system reprogrammability and bank-interleaved execution. Use Value: Enables zero-downtime firmware patching via background erase while maintaining real-time I/O scanning from active bank. |
Use Scenario: Holding boot loader and OS kernel images in head unit ECUs requiring secure startup verification. IC Role / Device Role / Timing Role: Boot sector-configured flash with Secured Silicon Region for cryptographic key storage. Use Value: Supports verified boot chain using factory-programmed ESN and customer-locked bootloader signature region. |
| Medical Device Configuration Storage | Network Router Boot Image Repository |
|
Use Scenario: Retaining calibrated sensor parameters and user preferences across power cycles in diagnostic imaging equipment. IC Role / Device Role / Timing Role: High-reliability parameter storage with 20-year data retention and 100K endurance. Use Value: Guarantees calibration integrity over device lifetime without battery-backed SRAM or external EEPROM. |
Use Scenario: Hosting primary and fallback boot images for carrier-grade routers requiring fail-safe firmware recovery. IC Role / Device Role / Timing Role: Dual-boot image storage with hardware sector protection isolating active/fallback partitions. Use Value: Enables atomic firmware swaps and rollback on corruption detection without external controller intervention. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| S29JL032J70TFI013 | 70 ns access time; wider voltage range (2.7–3.6 V); same density and feature set | Better suited for battery-powered systems with variable supply; slightly lower performance ceiling | Select when VCC may dip below 3.0 V or when 70 ns timing suffices for host interface |
| S29GL032N90TFI010 | 32 Mb MirrorBit NOR flash; 90 ns access; supports 1.8 V core + 3.3 V I/O; different command set | Requires software adaptation; lower active power but no simultaneous read/write capability | Choose for new designs prioritizing ultra-low active current over concurrent operation |
Compared with S29JL032J60TFI013, the 70 ns variant trades speed for broader voltage tolerance, while the S29GL032N offers lower power and newer process tech but sacrifices zero-latency bank concurrency - making the original optimal for latency-critical firmware update paths.
Availability
S29JL032J60TFI013 is available at Aetrix Electronics and suitable for industrial PLC firmware storage, automotive infotainment boot memory, and medical device configuration storage requiring stable component supply and long-term obsolescence management.
Supply support for S29JL032J60TFI013 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a global semiconductor leader headquartered in Munich, Germany, specializing in power management, automotive MCUs, and memory solutions with strong industrial and automotive focus.
The S29JL032J belongs to Infineon's legacy Cypress NOR Flash portfolio, designed specifically for embedded systems requiring deterministic, in-system reprogrammable non-volatile storage with robust data integrity and secure boot capabilities.
FAQ
What package types are supported by S29JL032J60TFI013?
The S29JL032J60TFI013 is offered in two industry-standard packages: 48-pin TSOP (TS 048) and 48-ball fine-pitch BGA (VBK048). Both share identical pin functionality and timing specifications, differing only in mechanical footprint and thermal characteristics - TSOP suits cost-sensitive through-hole or surface-mount legacy boards, while FBGA enables higher-density routing in space-constrained designs.
Does S29JL032J60TFI013 support true simultaneous read and write across all banks?
No - the S29JL032J60TFI013 supports simultaneous operation between exactly two banks at a time, regardless of whether configured as a 2-bank or 4-bank device. While the memory array is partitioned into up to four physical banks, the internal control logic permits only one active erase/program bank and one active read bank concurrently. This architecture delivers zero-latency interleaving but does not allow three or more parallel operations.
How is the Secured Silicon Region accessed and locked?
The Secured Silicon Region (256 B) is accessed via the CFI-defined "Enter Secured Silicon Region" command sequence (0x555=0xAA, 0x2AA=0x55, 0x555=0xB0). Once written, the Customer Lock Bit (DQ6) can be permanently set to 1 using the "Lock Secured Silicon Region" command (0x555=0xAA, 0x2AA=0x55, 0x555=0xB1), disabling further writes to that sector. Factory locking is pre-applied and verifiable via autoselect mode.
Can S29JL032J60TFI013 operate with a 2.7 V supply?
No - the S29JL032J60TFI013 is rated for 3.0 V to 3.6 V operation only. Devices marked with "60" speed grade (like this part) require minimum 3.0 V for guaranteed timing compliance and erase/program functionality. For 2.7 V operation, the S29JL032J70TFI013 variant must be selected, as it specifies 2.7–3.6 V voltage range and 70 ns access time.
S29JL032J60TFI013 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- JL-J
- Package/Case:
- 48-TFSOP (0.724", 18.40mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 32Mbit
- Memory Organization:
- 4M x 8, 2M x 16
- Memory Interface:
- Parallel
- Clock Frequency:
- -
- Write Cycle Time - Word, Page:
- 60ns
- Access Time:
- 60 ns
- Voltage - Supply:
- 2.7V ~ 3.6V
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 48-TSOP
S29JL032J60TFI013 FAQ
1.How can I place an order for S29JL032J60TFI013 through Aetrix?
Please submit a Request for Quotation (RFQ) for S29JL032J60TFI013 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for S29JL032J60TFI013 reliable?
The price and inventory of S29JL032J60TFI013 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S29JL032J60TFI013 is usually 5 days.
3.What payment methods are accepted for S29JL032J60TFI013?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S29JL032J60TFI013 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for S29JL032J60TFI013?
S29JL032J60TFI013 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your S29JL032J60TFI013 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for S29JL032J60TFI013?
For technical support, including S29JL032J60TFI013 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S29JL032J60TFI013 requirements.
6.How does Aetrix verify that S29JL032J60TFI013 is sourced from the original manufacturer or authorized distributors?
All S29JL032J60TFI013 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S29JL032J60TFI013 meets industry standards.
7.What is the process for return or replacement of S29JL032J60TFI013?
All S29JL032J60TFI013 units undergo pre-shipment inspection (PSI). If there is an issue with S29JL032J60TFI013, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The S29JL032J60TFI013 part is unused and in its original packaging.
Return procedure for S29JL032J60TFI013:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
S29JL032J60TFI013 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
