My Inquiry
My Account
Infineon Technologies S70FS01GSAGMFV010
- Part No.:
- S70FS01GSAGMFV010
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 16-SOIC (0.295", 7.50mm Width)
- Datasheet:
-
S70FS01GSAGMFV010.pdf
- Description:
- IC FLASH 1GBIT SPI/QUAD 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:2,388
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
S70FS01GSAGMFV010 from Infineon is a 1 Gb (128 MB) SPI Multi-I/O Flash memory IC using 65-nm MIRRORBIT™ Eclipse architecture, operating at 1.7–2.0 V with industrial temperature range (–40 °C to +85 °C), supporting DDR Quad I/O read up to 80 MBps and featuring hardware ECC for single-bit error correction. It serves as non-volatile program/data storage in microcontroller boot systems.
For engineers reviewing the S70FS01GSAGMFV010 datasheet, S70FS01GSAGMFV010 pinout, S70FS01GSAGMFV010 application, or S70FS01GSAGMFV010 equivalent, key selection factors include SPI-MIO interface compatibility with S25FL1-K/S25FL-P families, hybrid/uniform sector erase options, OTP security array, and AEC-Q100 Grade 3 qualification for automotive use.
Technical Context
This device implements a dual-die SPI flash architecture with two independent MirrorBit arrays, enabling concurrent read/program operations across die boundaries. Its control logic supports SFDP v1.6 and CFI for auto-configuration, and integrates dedicated ECC circuitry that operates transparently during read cycles without software intervention.
The SPI-MIO interface supports four I/O lines (IO0–IO3) with configurable clock polarity/phase (modes 0 and 3), DDR command execution, and extended addressing (24-/32-bit). Reset functionality is multiplexed on IO3, and write protection is implemented via both status register bits and hardware WP# pin.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 1 Gb (128 MB) - sufficient for full firmware images and configuration data in resource-constrained embedded hosts. |
| Interface Type | SPI Multi-I/O (Quad/DDR) - enables 80 MBps peak bandwidth using all four I/O lines in DDR mode. |
| Erase Endurance | 100,000 cycles per sector - supports frequent field firmware updates in industrial gateways. |
| Data Retention | 20 years minimum at 85 °C - ensures long-term reliability in unattended infrastructure equipment. |
| Voltage Range | 1.7 V to 2.0 V - compatible with low-power 1.8 V I/O domains in modern SoCs and MCUs. |
| Temperature Range | –40 °C to +85 °C (Industrial) - validated for operation in factory automation controllers and outdoor edge nodes. |
| Package | 16-lead SOIC 300 mil - surface-mount compatible with standard reflow profiles and automated assembly. |
Pinout & Package
Package: 16-pin SOIC (300 mil width), Pb-free, RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| CS# | Chip Select Input | Active-low enable for SPI command decoding; must be asserted before SCK edge to initiate transaction. |
| SCK | Serial Clock Input | Provides timing reference for all SPI transfers; supports up to 133 MHz SDR or 80 MHz DDR operation. |
| SI / IO0 | Serial Input / I/O Line 0 | Primary data input in standard SPI; functions as bidirectional I/O line in Quad I/O mode. |
| SO / IO1 | Serial Output / I/O Line 1 | Primary data output in standard SPI; bidirectional in Dual/Quad I/O modes for full-duplex reads. |
| WP# / IO2 | Write Protect Input / I/O Line 2 | Hardware lock for sector protection; also serves as bidirectional I/O line in multi-I/O commands. |
| RESET# / IO3 | Reset Input / I/O Line 3 | Resets internal state and exits DPD mode; doubles as fourth I/O line in Quad/DDR protocols. |
| VCC | Power Supply | 1.7–2.0 V supply for core and I/O circuits; decoupling required within 10 mm of pin. |
| VSS | Ground | Reference return path for all signals and power; requires low-impedance PCB plane connection. |
Key Features
| Feature | Design Value |
|---|---|
| Hardware ECC Engine | Single-bit error correction applied automatically on every read, eliminating need for host-side error handling logic. |
| Hybrid Sector Architecture | Eight 4 KB sectors + one 224 KB sector at top/bottom address space - optimizes small-parameter storage and large-code updates. |
| OTP Security Array | 1024-byte one-time-programmable region for cryptographic keys or calibration data, permanently locked after programming. |
| Program/Erase Suspend | Allows host to pause background erase or program operations to service high-priority read requests with sub-10 µs latency. |
| Advanced Sector Protection (ASP) | Password-controlled individual sector locking - prevents unauthorized firmware modification in certified automotive ECUs. |
Applications
| Automotive Instrument Cluster | Industrial PLC Firmware Storage |
|---|---|
Use Scenario: Storing calibrated gauge graphics, driver-assist firmware, and OTA update payloads in digital dashboards. IC Role / Device Role / Timing Role: Non-volatile boot memory mapped to MCU's XIP interface; provides deterministic <50 µs read latency for critical startup code. Use Value: AEC-Q100 Grade 3 qualification ensures operation across –40 °C to +85 °C ambient, while 20-year retention avoids recalibration drift over vehicle lifetime. | Use Scenario: Holding ladder logic programs, I/O mapping tables, and safety-critical firmware in programmable logic controllers. IC Role / Device Role / Timing Role: SPI-connected configuration store accessed by ARM Cortex-M7 host; supports secure field updates via ASP password protection. Use Value: 100,000 erase cycles allow weekly firmware revisions over 20+ years; hybrid sector layout isolates parameter blocks from main code image. |
| Medical Imaging Boot Loader | Edge AI Gateway Configuration |
Use Scenario: Hosting secure bootloader and DICOM protocol stack in portable ultrasound devices requiring FDA Class II compliance. IC Role / Device Role / Timing Role: First-stage boot memory verified by hardware ECC before transferring control to encrypted application image. Use Value: OTP array stores root-of-trust keys used in secure boot chain; ECC guarantees integrity of boot instructions under EMI-prone clinical environments. | Use Scenario: Storing neural network model weights, sensor fusion parameters, and TLS certificates in cellular-connected smart sensors. IC Role / Device Role / Timing Role: Quad I/O interface delivers >60 MBps sustained read throughput to feed real-time inference engines without DRAM buffering. Use Value: DDR Quad I/O mode achieves 80 MBps bandwidth at 80 MHz clock - reduces firmware load time by 4× versus standard SPI. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar SPI flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Cypress S25FL128SAGMFV001 | 128 MB density, same SOIC-16 package, but lacks DDR mode support and has lower max Quad Read rate (40 MBps vs 66 MBps). | No DDR capability limits bandwidth-critical AI edge applications; identical OTP and ASP features retained. | Select when DDR is unnecessary and legacy S25FL1-K footprint compatibility is mandatory. |
| Winbond W25Q128JVSIM | 128 MB, 1.8 V, SOIC-8 package (not pin-compatible); supports QPI but no DDR; ECC requires external controller. | Smaller footprint saves board area but requires redesign; no integrated hardware ECC increases host processing overhead. | Choose for cost-sensitive consumer designs where board space is constrained and ECC can be handled in software. |
Compared with S25FL128SAGMFV001, S70FS01GSAGMFV010 delivers 2× higher Quad Read bandwidth and DDR support; versus W25Q128JVSIM, it offers hardware ECC and pin-compatible upgrade path from legacy Cypress FS-S family designs.
Availability
S70FS01GSAGMFV010 is available at Aetrix Electronics and suitable for automotive instrument clusters, industrial PLCs, medical imaging boot loaders, and edge AI gateways requiring stable component supply with long lifecycle assurance.
Supply support for S70FS01GSAGMFV010 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and secure memory solutions, with global R&D centers and ISO/TS 16949-certified manufacturing.
The FS-S Flash product line targets high-reliability embedded systems requiring AEC-Q100 qualification, hardware security, and deterministic performance in harsh thermal environments.
FAQ
What is the maximum clock frequency supported in DDR Quad I/O mode?
The S70FS01GSAGMFV010 supports DDR Quad I/O operation at up to 80 MHz, delivering 80 MBps effective read bandwidth. This is specified in the AC characteristics section (Table 6.5) of the official datasheet Rev. *G, with setup/hold timing validated under industrial temperature conditions.
Does this device support 32-bit addressing for accessing the full 128 MB capacity?
Yes, the device supports both 24-bit and 32-bit addressing modes via the Extended Address Register (EAR). When 32-bit addressing is enabled, the full 1 Gb address space is accessible without bank switching, essential for large firmware images exceeding 16 MB.
How is the OTP array protected after programming?
The 1024-byte OTP array is permanently locked after first programming using the Write Enable and Program OTP commands. Once locked, no further writes or erases are possible-even with reset or power cycle-ensuring cryptographic keys or calibration data remain immutable.
Can the device operate in standard SPI mode without enabling multi-I/O features?
Yes, the device defaults to standard SPI mode (single I/O) on power-up. All multi-I/O features-including Dual/Quad I/O and DDR-are disabled until explicitly enabled via configuration registers, ensuring backward compatibility with legacy SPI controllers lacking multi-line support.
S70FS01GSAGMFV010 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- FS-S
- Package/Case:
- 16-SOIC (0.295", 7.50mm Width)
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 1Gbit
- Memory Organization:
- 128M x 8
- Memory Interface:
- SPI - Quad I/O
- Clock Frequency:
- 133 MHz
- Write Cycle Time - Word, Page:
- -
- Access Time:
- -
- Voltage - Supply:
- 1.7V ~ 2V
- Operating Temperature:
- -40°C ~ 105°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
S70FS01GSAGMFV010 FAQ
1.How can I place an order for S70FS01GSAGMFV010 through Aetrix?
Please submit a Request for Quotation (RFQ) for S70FS01GSAGMFV010 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for S70FS01GSAGMFV010 reliable?
The price and inventory of S70FS01GSAGMFV010 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S70FS01GSAGMFV010 is usually 5 days.
3.What payment methods are accepted for S70FS01GSAGMFV010?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S70FS01GSAGMFV010 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for S70FS01GSAGMFV010?
S70FS01GSAGMFV010 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your S70FS01GSAGMFV010 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for S70FS01GSAGMFV010?
For technical support, including S70FS01GSAGMFV010 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S70FS01GSAGMFV010 requirements.
6.How does Aetrix verify that S70FS01GSAGMFV010 is sourced from the original manufacturer or authorized distributors?
All S70FS01GSAGMFV010 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S70FS01GSAGMFV010 meets industry standards.
7.What is the process for return or replacement of S70FS01GSAGMFV010?
All S70FS01GSAGMFV010 units undergo pre-shipment inspection (PSI). If there is an issue with S70FS01GSAGMFV010, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The S70FS01GSAGMFV010 part is unused and in its original packaging.
Return procedure for S70FS01GSAGMFV010:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
S70FS01GSAGMFV010 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
