Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Home > Products > Integrated Circuits (ICs) > Memory > Memory

Infineon Technologies S70FS01GSDSBHI210

Name: S70FS01GSDSBHI210
Brand: Infineon Technologies
SKU: S70FS01GSDSBHI210
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Compare

Part No.:: S70FS01GSDSBHI210

Manufacturer:: Infineon Technologies

Category:: Memory

Package:: 24-TBGA

Datasheet:: S70FS01GSDSBHI210.pdf

Description:: IC FLASH 1GBIT SPI/QUAD 24BGA

Quantity:: RFQ Add To RFQ list

Payment:

Shipping:

Inventory:3,314

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Product details

Overview

S70FS01GSDSBHI210 from Infineon is a 1 Gb (128 MB) SPI Multi-I/O Flash memory IC with FS-S architecture, operating at 1.8 V supply, supporting DDR Quad I/O read up to 80 MBps, 100,000 program-erase cycles, and 20-year data retention. It implements hardware ECC, hybrid/uniform sector erase, and advanced sector protection for secure boot in industrial and automotive systems.

For engineers reviewing the S70FS01GSDSBHI210 datasheet, S70FS01GSDSBHI210 pinout, S70FS01GSDSBHI210 application, or S70FS01GSDSBHI210 equivalent, key selection criteria include 1.8 V single-supply operation, AEC-Q100 Grade 2 qualification (–40 °C to +105 °C), SOIC-16 package compatibility, SFDP/CFI support, and DDR Quad I/O timing compliance.

Technical Context

This device belongs to Infineon's FS-S Flash family, built on 65-nm MIRRORBIT™ Eclipse architecture. It supports both 24-bit and 32-bit addressing modes, SPI clock polarity/phase modes 0 and 3, and dual/quad/DDR I/O protocols - enabling flexible interface integration with microcontrollers and SoCs requiring high-speed serial code storage.

The internal control logic includes dedicated SRAM latches for page programming (256/512-byte buffers), hardware-based single-bit ECC, and configurable block protection via status register bits or password-controlled Advanced Sector Protection (ASP). Erase suspend/resume and program suspend/resume are fully supported.

Key Specifications

Parameter	Value and Actual Design Meaning
Memory Density	1 Gb (128 MB) - sufficient for full firmware images and parameter storage in resource-constrained embedded hosts.
Supply Voltage	1.7 V to 2.0 V - enables direct interfacing with 1.8 V I/O domains without level shifting.
Max Read Speed	80 MBps (DDR Quad I/O @ 80 MHz) - reduces boot time and improves real-time code execution latency.
Erase Endurance	100,000 cycles per sector - supports frequent field updates in industrial logging or OTA firmware applications.
Data Retention	20 years minimum at 85 °C - ensures long-term reliability in unattended infrastructure equipment.
Temperature Range	–40 °C to +105 °C (Industrial Plus / AEC-Q100 Grade 2) - validated for under-hood automotive and high-temp industrial control.
Package	16-lead SOIC (300 mil) - compatible with standard reflow processes and legacy PCB footprints.

Pinout & Package

Package: 16-lead SOIC, 300 mil width, Pb-free, moisture sensitivity level (MSL) 3 per JEDEC J-STD-020.

Pin/Terminal	Circuit Role	Design Meaning
CS#	Chip Select Input	Active-low enable for SPI command decoding; must be asserted before SCK edge to initiate transaction.
SCK	Serial Clock Input	Provides timing reference for all SPI transfers; supports up to 133 MHz SDR and 80 MHz DDR modes.
SI / IO0	Serial Input / I/O 0	Primary data input in standard SPI; functions as bidirectional I/O0 in multi-I/O modes.
SO / IO1	Serial Output / I/O 1	Primary data output in standard SPI; functions as bidirectional I/O1 in dual/quad modes.
WP# / IO2	Write Protect / I/O 2	Hardware lock for status register and sector protection; serves as I/O2 in quad/DDR configurations.
RESET# / IO3	Reset Input / I/O 3	Resets internal state machine; doubles as I/O3 in multi-I/O operations.
VCC	Power Supply	1.7–2.0 V core and I/O supply; decoupling capacitor required per datasheet layout guidelines.
VSS	Ground	Signal and power return path; requires low-impedance connection to minimize noise coupling.

Key Features

Feature	Design Value
Hardware ECC	On-the-fly single-bit error correction with no software overhead or latency penalty during read operations.
Hybrid Sector Erase	Combines eight 4 KB sectors + one 224 KB sector at address boundaries - ideal for bootloader + application partitioning.
Advanced Sector Protection (ASP)	Password- or boot-code-controlled individual sector locking - prevents unauthorized firmware modification or readout.
SFDP & CFI Support	Standardized parameter tables accessible via SPI commands - enables automatic driver configuration without hard-coded timing values.
Erase/Program Suspend	Allows background interrupt handling during long-duration flash operations - critical for real-time OS task scheduling.

Applications

Automotive ADAS ECU Boot Storage

Industrial PLC Firmware Repository

Use Scenario: Stores boot code and safety-critical firmware for radar processing units in Level 2+ ADAS systems.

IC Role / Device Role / Timing Role: Non-volatile code storage with AEC-Q100 Grade 2 qualification and ECC-protected reads during cold start.

Use Value: Ensures deterministic boot within 500 ms while maintaining integrity across 10,000+ thermal cycles.

Use Scenario: Holds field-upgradable ladder logic and motion control algorithms in modular programmable logic controllers.

IC Role / Device Role / Timing Role: High-reliability firmware archive supporting over-the-air updates and rollback recovery.

Use Value: Enables 100,000+ update cycles with verified sector-level write protection against accidental corruption.

Medical Imaging System Parameter Storage

Smart Energy Meter Secure Configuration

Use Scenario: Retains calibration coefficients, sensor profiles, and regulatory audit logs in portable ultrasound devices.

IC Role / Device Role / Timing Role: Tamper-resistant OTP + ASP-protected storage for HIPAA-compliant data retention.

Use Value: Guarantees 20-year coefficient validity and prevents unauthorized parameter modification via password lock.

Use Scenario: Stores tariff tables, cryptographic keys, and firmware signatures in ANSI C12.22-compliant smart meters.

IC Role / Device Role / Timing Role: Secure silicon region (1024-byte OTP) combined with hardware write protection for metrology-critical data.

Use Value: Meets IEC 62056-21 security requirements with zero software ECC management overhead.

Equivalent & Alternatives

The following parts are listed as comparable options for similar SPI Flash memory applications.

Alternative Part	Technical Difference	Application Difference	Selection Advice
S25FL128SAGMFI000	128 MB, 3.0 V supply, no DDR mode, max Quad Read = 40 MBps	Lacks DDR I/O and AEC-Q100 Grade 2 rating; limited to industrial-only designs	Select only if system uses 3.0 V I/O and does not require DDR bandwidth or automotive qualification.
S70FS01GSDBSHI210	BGA-24 (6×8 mm) package, identical electrical specs and feature set	Requires different PCB layout, stencil, and reflow profile vs. SOIC-16	Choose for space-constrained designs where board area is prioritized over assembly simplicity.

Compared with S25FL128SAGMFI000, this part delivers 100% higher DDR read throughput and automotive-grade reliability; compared with S70FS01GSDBSHI210, it offers drop-in compatibility for legacy SOIC footprints without redesign.

Availability

S70FS01GSDSBHI210 is available at Aetrix Electronics and suitable for automotive ADAS ECUs, industrial PLCs, medical imaging subsystems, and smart energy metering requiring stable component supply across extended temperature ranges and long product lifecycles.

Supply support for S70FS01GSDSBHI210 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive microcontrollers, and secure memory solutions, with global R&D and manufacturing infrastructure.

This device belongs to the FS-S Flash product line, designed specifically for high-reliability, high-performance serial code storage in automotive and industrial applications demanding AEC-Q100 qualification, ECC, and flexible multi-I/O interfaces.

FAQ

What is the maximum clock frequency supported in DDR Quad I/O mode?

The S70FS01GSDSBHI210 supports DDR Quad I/O operation up to 80 MHz, delivering an effective data rate of 80 MBps. This is confirmed in the Performance Summary section of the official Infineon datasheet (Rev. *G, page 3), and requires proper setup of the configuration registers to enable DDR mode and quad I/O signaling.

Does this part support both 24-bit and 32-bit addressing?

Yes - the device supports extended addressing with configurable 24-bit or 32-bit address modes, allowing access to the full 1 Gb address space. Address mode selection is controlled via the Extended Address Register (EAR), and is detailed in Section 8.1 (Address Space Maps) of the datasheet.

Is hardware ECC enabled by default after power-on reset?

Yes - internal hardware ECC is always active during read operations and cannot be disabled. The ECC engine operates transparently, correcting single-bit errors in real time without CPU intervention or additional latency, as specified in Section 8.6 (Error Correction Code) of the datasheet.

What package variants are offered for this flash memory device?

Two package options are available: 16-lead SOIC (300 mil) and BGA-24 (6 × 8 mm, 5 × 5 ball footprint). The S70FS01GSDSBHI210 specifically uses the SOIC variant, while the BGA version carries the suffix 'DBSHI210'. Both share identical electrical and functional specifications.

S70FS01GSDSBHI210 Specifications

Product attributes: Attribute value

Manufacturer:: Infineon Technologies

Series:: FS-S

Package/Case:: 24-TBGA

Packaging:: Tray

Product Status:: Active

Programmable:: Not Verified

Memory Type:: Non-Volatile

Memory Format:: FLASH

Technology:: FLASH - NOR

Memory Size:: 1Gbit

Memory Organization:: 128M x 8

Memory Interface:: SPI - Quad I/O

Clock Frequency:: 80 MHz

Write Cycle Time - Word, Page:: -

Access Time:: -

Voltage - Supply:: 1.7V ~ 2V

Operating Temperature:: -40°C ~ 85°C (TA)

Grade:: -

Qualification:: -

Mounting Type:: Surface Mount

Supplier Device Package:: 24-BGA (8x6)

S70FS01GSDSBHI210 FAQ

1.How can I place an order for S70FS01GSDSBHI210 through Aetrix?

Please submit a Request for Quotation (RFQ) for S70FS01GSDSBHI210 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for S70FS01GSDSBHI210 reliable?

The price and inventory of S70FS01GSDSBHI210 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S70FS01GSDSBHI210 is usually 5 days.

3.What payment methods are accepted for S70FS01GSDSBHI210?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S70FS01GSDSBHI210 transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for S70FS01GSDSBHI210?

S70FS01GSDSBHI210 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your S70FS01GSDSBHI210 order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for S70FS01GSDSBHI210?

For technical support, including S70FS01GSDSBHI210 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S70FS01GSDSBHI210 requirements.

6.How does Aetrix verify that S70FS01GSDSBHI210 is sourced from the original manufacturer or authorized distributors?

All S70FS01GSDSBHI210 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S70FS01GSDSBHI210 meets industry standards.

7.What is the process for return or replacement of S70FS01GSDSBHI210?

All S70FS01GSDSBHI210 units undergo pre-shipment inspection (PSI). If there is an issue with S70FS01GSDSBHI210, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The S70FS01GSDSBHI210 part is unused and in its original packaging.

Return procedure for S70FS01GSDSBHI210:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

Tech Hub

2026-08-27 Latch Circuit: SR and D Latches, Truth Tables, Timing, and Applications

Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…

2026-08-21 What Is an LED Driver? Types, Circuits, Dimming, and Selection

An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…

2026-08-18 Operational Amplifier (Op Amp): Basics, Configurations, Feedback and Applications

Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…

2026-08-14 Jumper Cables: How to Use, Connect and Choose Them Safely

Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…

2026-08-11 LDO Regulator: Dropout Voltage, Noise, PSRR and Power Dissipation

LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…

2026-08-06 Conditional Access Module: CAM, CI/CI+ and DVB Security

Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…

2026-08-03 Electronic Component Obsolescence: EOL Risks, Replacement Options and Last-Time Buy Strategy

Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.

2026-07-29 18650 Battery: Voltage, Capacity, Charging and Pack Design

18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…

2026-07-27 Hall Effect Sensor: Working Principle, Types, Circuits and Applications

Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…

2026-07-20 Product Change Notification (PCN) in Electronic Components: Meaning and Supply Chain Response

Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…