My Inquiry
My Account
Infineon Technologies S70FS01GSDSBHV213
- Part No.:
- S70FS01GSDSBHV213
- Manufacturer:
- Infineon Technologies
- Category:
- Memory
- Package:
- 24-TBGA
- Datasheet:
-
S70FS01GSDSBHV213.pdf
- Description:
- IC FLASH 1GBIT SPI/QUAD 24BGA
- Quantity:
- Payment:
- Shipping:
Inventory:4,034
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
S70FS01GSDSBHV213 from Infineon is a 1 Gb (128 MB) SPI Multi-I/O serial flash memory with 1.8 V single-supply operation, 65-nm MIRRORBIT™ Eclipse architecture, and support for DDR Quad I/O read up to 80 MBps. It features hardware ECC, hybrid/uniform sector erase options, 100,000 program-erase cycles, and AEC-Q100 Grade 2 automotive qualification (–40 °C to +105 °C). Used in automotive ADAS boot code storage and industrial controller firmware.
For engineers reviewing the S70FS01GSDSBHV213 datasheet, S70FS01GSDSBHV213 pinout, S70FS01GSDSBHV213 application, or S70FS01GSDSBHV213 equivalent, key selection criteria include DDR Quad I/O throughput, ECC-enabled reliability, hybrid sector erase flexibility, AEC-Q100 Grade 2 temperature rating, and SOIC-16 package compatibility with legacy S25FL1-K designs.
Technical Context
This device implements a SPI-MIO interface supporting clock polarity/phase modes 0 and 3, extended 24-/32-bit addressing, and QPI mode for burst wrap reads. Its dual-die architecture enables high-density 1 Gb capacity while maintaining pin compatibility with Infineon's S25FL-S family.
The internal ECC engine corrects single-bit errors on-the-fly during read operations, and the hybrid sector layout includes eight 4 KB sectors plus one 224 KB sector at either address boundary-enabling fine-grained firmware update partitioning without sacrificing bulk storage efficiency.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 1 Gb (128 MB) - supports full OS images or multi-application firmware in compact footprint |
| Interface | SPI Multi-I/O with DDR Quad I/O - delivers 80 MBps read bandwidth for fast boot and code execution |
| Erase Endurance | 100,000 cycles per sector - ensures long-term field reliability in frequent OTA update scenarios |
| Data Retention | 20 years minimum - guarantees firmware integrity over full vehicle lifecycle without refresh |
| Supply Voltage | 1.7 V to 2.0 V - compatible with low-voltage automotive domain controllers and power-constrained embedded systems |
| Temperature Range | –40 °C to +105 °C (AEC-Q100 Grade 2) - qualified for under-hood and ADAS ECU deployment |
| Package | 16-lead SOIC 300 mil - drop-in replacement for legacy SPI flash in space-constrained PCB layouts |
Pinout & Package
16-lead SOIC (300 mil) package with standard SPI-MIO pinout and dedicated RESET#/IO3 and WP#/IO2 functions. Compatible with automated placement and reflow processes.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| CS# | Chip Select | Active-low enable for SPI command decoding; supports daisy-chain configuration |
| SCK | Serial Clock | Input clock for SDR/DDR modes; supports up to 133 MHz SDR and 80 MHz DDR operation |
| SI / IO0 | Serial Input / I/O 0 | Primary data input in standard SPI; bidirectional in Quad I/O mode |
| SO / IO1 | Serial Output / I/O 1 | Primary data output in standard SPI; bidirectional in Quad I/O mode |
| WP# / IO2 | Write Protect / I/O 2 | Hardware sector lock control; also serves as second I/O line in multi-I/O commands |
| RESET# / IO3 | Reset / I/O 3 | Hardware reset initiation; doubles as third I/O line in Quad/DDR modes |
| VCC | Power Supply | 1.7–2.0 V core and I/O supply; single-rail simplifies power design |
| VSS | Ground | Signal and power reference plane; decoupling required per Infineon layout guidelines |
Key Features
| Feature | Design Value |
|---|---|
| Hardware ECC Engine | On-the-fly single-bit error correction during read - eliminates need for external error-handling logic |
| Hybrid Sector Architecture | Eight 4 KB + one 224 KB physical sectors at top/bottom - enables secure boot loader + flexible application partitioning |
| OTP Array | 1024-byte one-time programmable region - stores cryptographic keys or calibration data with permanent write-lock |
| Advanced Sector Protection (ASP) | Password- or boot-code-controlled individual sector locking - prevents unauthorized firmware modification in field-deployed units |
| SFDP & CFI Support | Standardized parameter tables accessible via SPI - enables automatic driver initialization without hard-coded timing constants |
Applications
| Automotive ADAS Boot Storage | Industrial PLC Firmware |
|---|---|
Use Scenario: Storing boot code and safety-critical firmware for radar processing units in autonomous driving systems. IC Role / Device Role / Timing Role: Nonvolatile boot memory with deterministic read latency and ECC-protected execution path. Use Value: AEC-Q100 Grade 2 qualification and 20-year data retention ensure functional safety compliance over vehicle lifetime. | Use Scenario: Holding field-upgradable control logic and HMI assets in programmable logic controllers deployed in factory automation. IC Role / Device Role / Timing Role: High-reliability firmware repository supporting secure OTA updates and rollback recovery. Use Value: Hybrid sector erase allows independent update of application code without disturbing boot loader or configuration data. |
| Medical Imaging System BIOS | Avionics Display Module |
Use Scenario: Hosting BIOS and diagnostic firmware in portable ultrasound and MRI console subsystems. IC Role / Device Role / Timing Role: Secure, radiation-tolerant nonvolatile memory with OTP-based key storage for HIPAA-compliant data handling. Use Value: Hardware write protection and ASP prevent tampering with regulatory-certified boot sequences. | Use Scenario: Storing display firmware and font assets in DO-178C-certified cockpit display units. IC Role / Device Role / Timing Role: High-speed SPI flash enabling sub-100ms boot time for critical flight instrumentation. Use Value: DDR Quad I/O read at 80 MBps meets real-time boot timing budgets under DO-254 hardware verification constraints. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| S25FL128SAGMFI000 | 128 MB, 3.0 V supply, no DDR mode, 66 MBps Quad Read max | Lacks AEC-Q100 qualification and ECC; suited for commercial-grade industrial control only | Select when cost sensitivity outweighs automotive qualification and ECC requirements |
| S70FS01GSDBSHV213 | BGA-24 (6 × 8 mm) package, identical electrical specs and feature set | Requires different PCB layout and reflow profile; better thermal performance in high-power modules | Select when board space is constrained and thermal dissipation exceeds SOIC limits |
Compared with S25FL128SAGMFI000, this part adds DDR I/O, ECC, and AEC-Q100 Grade 2 support-critical for safety-critical boot storage; versus S70FS01GSDBSHV213, it trades BGA thermal advantage for SOIC manufacturability and legacy compatibility.
Availability
S70FS01GSDSBHV213 is available at Aetrix Electronics and suitable for automotive ADAS systems, industrial PLCs, medical imaging devices, and avionics displays requiring stable component supply across extended product lifecycles.
Supply support for S70FS01GSDSBHV213 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive ICs, and secure microcontrollers, with global R&D and manufacturing infrastructure.
The FS-S Flash product line targets high-reliability embedded systems requiring automotive-grade endurance, security, and interoperability with legacy SPI flash ecosystems.
FAQ
What is the maximum DDR Quad I/O read speed supported by S70FS01GSDSBHV213?
The device supports DDR Quad I/O read at up to 80 MBps, achieved with an 80 MHz DDR clock. This is verified in the datasheet's Performance Summary table (page 3) and confirmed by AC timing specifications in Section 6.5. The speed assumes proper signal integrity, termination, and host controller support for DDR SPI mode.
Does S70FS01GSDSBHV213 include hardware error correction?
Yes, it integrates an on-die hardware ECC engine that automatically detects and corrects single-bit errors during read operations. This is implemented in silicon per the "Automatic error correcting code (ECC)" feature (page 1), and requires no host software intervention or additional memory overhead.
Can S70FS01GSDSBHV213 replace S25FL128S in existing designs?
Yes, it is footprint- and command-compatible with S25FL1-K, S25FL-P, and S25FL-S families per datasheet page 1. However, voltage range differs (1.8 V vs. 3.0 V), and DDR mode must be disabled if the host controller lacks DDR SPI support. Electrical validation is required before drop-in use.
What security mechanisms protect firmware against unauthorized modification?
It provides three layers: (1) hardware write protection via WP# pin, (2) status register–based block protection for contiguous sector ranges, and (3) Advanced Sector Protection (ASP) with password- or boot-code–controlled individual sector locking, as detailed in Section 9.4 of the datasheet.
S70FS01GSDSBHV213 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- FS-S
- Package/Case:
- 24-TBGA
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 1Gbit
- Memory Organization:
- 128M x 8
- Memory Interface:
- SPI - Quad I/O
- Clock Frequency:
- 80 MHz
- Write Cycle Time - Word, Page:
- -
- Access Time:
- -
- Voltage - Supply:
- 1.7V ~ 2V
- Operating Temperature:
- -40°C ~ 105°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 24-BGA (8x6)
S70FS01GSDSBHV213 FAQ
1.How can I place an order for S70FS01GSDSBHV213 through Aetrix?
Please submit a Request for Quotation (RFQ) for S70FS01GSDSBHV213 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for S70FS01GSDSBHV213 reliable?
The price and inventory of S70FS01GSDSBHV213 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for S70FS01GSDSBHV213 is usually 5 days.
3.What payment methods are accepted for S70FS01GSDSBHV213?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for S70FS01GSDSBHV213 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for S70FS01GSDSBHV213?
S70FS01GSDSBHV213 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your S70FS01GSDSBHV213 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for S70FS01GSDSBHV213?
For technical support, including S70FS01GSDSBHV213 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your S70FS01GSDSBHV213 requirements.
6.How does Aetrix verify that S70FS01GSDSBHV213 is sourced from the original manufacturer or authorized distributors?
All S70FS01GSDSBHV213 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that S70FS01GSDSBHV213 meets industry standards.
7.What is the process for return or replacement of S70FS01GSDSBHV213?
All S70FS01GSDSBHV213 units undergo pre-shipment inspection (PSI). If there is an issue with S70FS01GSDSBHV213, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The S70FS01GSDSBHV213 part is unused and in its original packaging.
Return procedure for S70FS01GSDSBHV213:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
S70FS01GSDSBHV213 Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
