NXP Semiconductors SLEV400/HAB,122

Overview

SLEV400/HAB,122 from Philips Semiconductors is an I•CODE Pegoda smart label read/write evaluation kit built around the SL RC400 contactless reader IC. It supports both I•CODE 1 and ISO 15693 protocols at 13.56 MHz, delivers up to 100 mm operating distance, draws 250 mA typical current in RF-on idle mode, and operates from USB bus power (4.5–5.5 V). It serves as a plug-and-play development tool for RFID label prototyping and application validation.

For engineers reviewing the SLEV400/HAB,122 datasheet, SLEV400/HAB,122 pinout, SLEV400/HAB,122 application, or SLEV400/HAB,122 equivalent, this evaluation kit provides immediate access to full I•CODE 1 and ISO 15693 command sets via USB interface, includes on-board µ-controller and 4 Mbit SRAM, and ships with documentation, demo software, SL RC400 samples, and I•CODE labels - enabling rapid functional verification and host integration testing.

Technical Context

The SLEV400/HAB,122 integrates the SL RC400 analog front-end IC for 13.56 MHz contactless communication, handling all I•CODE 1 and ISO 15693 modulation, coding, and protocol framing internally. A dedicated µ-controller manages USB host communication, translates serial commands into remote function calls, and executes full protocol stacks.

It uses a flexible Pegoda antenna and is strictly bus-powered via USB Type-B connector (no external supply). The design implements USB 1.1 compliance with 12 Mbaud data rate, CE/FCC Class A certification, and operates across –10 °C to +70 °C ambient temperature range.

Key Specifications

Availability

SLEV400/HAB,122 is available at Aetrix Electronics and suitable for RFID system prototyping, smart label validation, and ISO 15693-based asset tracking applications requiring stable component supply and full-stack development support.

Supply support for SLEV400/HAB,122 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Philips Semiconductors (now NXP Semiconductors) was a global leader in analog, RF, and mixed-signal ICs, with core expertise in contactless communication, smart card, and RFID technologies.

The SLEV400/HAB,122 belongs to the I•CODE Pegoda evaluation platform family, designed specifically to accelerate development of 13.56 MHz HF RFID reader systems using the SL RC400 IC - targeting smart label authentication, inventory management, and secure identification applications.

FAQ

What is the primary function of the SLEV400/HAB,122?

The SLEV400/HAB,122 is an evaluation kit for the I•CODE Pegoda smart label read/write system. Its primary function is to provide a fully assembled, USB-connected hardware platform that implements the SL RC400 reader IC to enable rapid development, testing, and validation of I•CODE 1 and ISO 15693 RFID applications. The SLEV400/HAB,122 includes firmware, antenna, and supporting components to execute full protocol stacks out-of-the-box.

Does the SLEV400/HAB,122 require an external power supply?

No, the SLEV400/HAB,122 is exclusively bus-powered via its integrated USB Type-B connector and draws regulated 5 V DC directly from the host PC. It complies with USB 1.1 low-power device initialization and transitions to higher current draw (up to 250 mA) only after activation - no external power adapter, wall wart, or auxiliary supply is needed or supported for standard operation of the SLEV400/HAB,122.

Which RFID standards does the SLEV400/HAB,122 support?

The SLEV400/HAB,122 supports two distinct but interoperable HF RFID standards: I•CODE 1 (Philips proprietary, later standardized as ISO/IEC 15693-3) and the full ISO/IEC 15693 series (including mode selection, subcarrier, data rate, and command set). Both are implemented in hardware by the SL RC400 IC and exposed through the SLEV400/HAB,122's firmware and host interface - no configuration jumpers or hardware changes are required to switch between them.

What accessories are included with the SLEV400/HAB,122?

The SLEV400/HAB,122 evaluation kit includes the read/write device itself, a USB cable (Type-A to Type-B), documentation and demo software on CD, five SL RC400 sample ICs, and five I•CODE smart labels. No RS232 cables, RJ45 adapters, or external antennas are included - those interfaces were explicitly marked "not provided and not supported" in the official specification for the SLEV400/HAB,122.

Is the SLEV400/HAB,122 FCC and CE certified?

Yes, the SLEV400/HAB,122 carries formal FCC Class A and CE declarations of conformity per EN 300 330, EN 60950, and EN 301 489-9. Certification applies strictly when used with the supplied shielded USB cable; the specification notes that shielding components are mandatory to maintain compliance. FCC ID OWR40089 is assigned to the SLEV400/HAB,122, confirming its authorized commercial use in regulated markets.