Renesas SLG4SA-DIP

Overview

SLG4SA-DIP from Renesas Electronics is a development platform designed to prototype and validate GreenPAK mixed-signal programmable ICs-including SLG46534-in dual in-line package (DIP) form. It provides USB-powered emulation, configurable test point connectivity (VDD/GND/Pull-up/Pull-down/Button), 20-pin expansion interface with analog-switched I/O, and real-time logic testing via GreenPAK Designer IDE.

For engineers reviewing the SLG4SA-DIP datasheet, SLG4SA-DIP pinout, SLG4SA-DIP application, or SLG4SA-DIP equivalent, this board enables rapid configuration, signal injection, waveform capture, and OTP-free RAM-based emulation of GreenPAK logic functions-supporting early-stage validation of LUT-based counters, oscillators, enable-controlled state machines, and mixed-signal glue logic before final chip programming.

Technical Context

The SLG4SA-DIP operates in two primary modes: Emulation mode (direct RAM loading for iterative logic testing without OTP writes) and Test mode (powering pre-programmed GreenPAK devices and executing standard OTP-to-RAM boot). Its expansion connector uses software-controlled analog switches per pin (except GND/NC), enabling dynamic routing of external signals to GreenPAK DIP-socketed ICs.

Power delivery supports 1.7 V to 5.5 V via onboard boost converter from USB; VDD and Data pins on both DIP socket and expansion header are independently configurable for source/sink/pull-up/pull-down/button simulation. All test points exhibit ≤20 pF capacitance and ±1 µA leakage, ensuring minimal signal integrity impact during probing or logic injection.

Key Specifications

Availability

SLG4SA-DIP is available at Aetrix Electronics and suitable for GreenPAK prototyping, mixed-signal logic validation, and educational labs requiring stable component supply, repeatable test setup, and seamless integration with GreenPAK Designer IDE.

Supply support for SLG4SA-DIP includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Renesas Electronics Corporation is a global semiconductor leader delivering microcontrollers, analog, power, and SoC solutions for automotive, industrial, and IoT applications.

The SLG4SA-DIP belongs to Renesas' GreenPAK development tool family, engineered specifically to accelerate design iteration and functional verification of field-programmable mixed-signal ICs without requiring soldering, custom PCBs, or OTP commitment.

FAQ

What is the primary function of the SLG4SA-DIP?

The SLG4SA-DIP is a hardware development platform that enables rapid prototyping and real-time emulation of GreenPAK programmable mixed-signal ICs-such as SLG46534-in DIP format. It allows engineers to load, test, and debug logic configurations directly into RAM without programming OTP memory, supporting iterative design validation before final chip deployment.

Does the SLG4SA-DIP require external power or operate solely from USB?

The SLG4SA-DIP operates exclusively from USB power via its mini-B connector. Its onboard boost converter generates a regulated 1.7–5.5 V output, which can power both the GreenPAK DIP-socketed IC and external circuits connected to the expansion header-eliminating need for external bench supplies during initial validation.

How does Emulation mode differ from Test mode on the SLG4SA-DIP?

In Emulation mode, the SLG4SA-DIP loads project logic directly into the GreenPAK device's RAM, enabling unlimited reconfiguration without OTP writes-ideal for debugging. In Test mode, it powers a pre-programmed GreenPAK IC and executes its stored OTP configuration, verifying final firmware behavior under real boot conditions.

Can the SLG4SA-DIP be used with GreenPAK ICs other than SLG46534?

Yes-the SLG4SA-DIP is compatible with all GreenPAK DIP-packaged devices supported by GreenPAK Designer, including SLG46120, SLG46537, and SLG46826. Pin mapping and functionality depend on the specific GreenPAK IC inserted into the DIP socket, as verified in the "Pins and TPs Accordance" table of UM-GP-007.

What types of signal sources can be applied to the SLG4SA-DIP's Data pins?

Data pins on the SLG4SA-DIP accept five configurable signal sources: VDD (via 100 Ω), GND (via 100 Ω), MCU-style 5 kΩ pull-up + 100 Ω series, 5 kΩ pull-down + 100 Ω series, or virtual button toggling between VDD and GND-enabling precise stimulus control for digital input validation and timing analysis of GreenPAK logic blocks.