My Inquiry
My Account
Microchip Technology SMBG5384BE3/TR13
- Part No.:
- SMBG5384BE3/TR13
- Manufacturer:
- Microchip Technology
- Category:
- Single Zener Diodes
- Package:
- DO-215AA, SMB Gull Wing
- Datasheet:
-
SMBG5384BE3/TR13.pdf
- Description:
- DIODE ZENER 160V 5W DO214AA
- Quantity:
- Payment:
- Shipping:
Inventory:8,635
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SMBG5384BE3/TR13 from Microsemi is a surface-mount 5 W Zener diode with nominal Zener voltage of 160 V, ±5% tolerance (B suffix), 8.0 mA test current (IZT), and 350 Ω maximum dynamic impedance (ZZT) at IZT - used for precision voltage regulation in power supply feedback loops and overvoltage protection circuits.
For engineers reviewing the SMBG5384BE3/TR13 datasheet, SMBG5384BE3/TR13 pinout, SMBG5384BE3/TR13 application, or SMBG5384BE3/TR13 equivalent, key selection criteria include Zener voltage accuracy, surge current rating (1650 A), thermal resistance (90 °C/W on FR4), and RoHS-compliant matte-tin plating for lead-free assembly.
Technical Context
This device operates in reverse-bias breakdown mode to maintain stable voltage across wide current ranges (IZK = 1.0 mA to IZM = 8.0 mA). Its DO-215AA gull-wing package enables visible solder joints and supports high-density PCB layouts while meeting IPC/JEDEC J-STD-020B Level 1 moisture sensitivity without dry pack.
Designed for unidirectional voltage clamping, SMBG5384BE3/TR13 exhibits minimal voltage drift over temperature (−65 °C to +150 °C junction range) and withstands non-repetitive 8.3 ms half-sine surges up to 1650 A - critical for transient suppression in industrial DC bus lines and telecom power stages.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Zener Voltage (VZ) | 160 V ±5% at 8.0 mA - defines regulated output voltage under nominal bias conditions |
| Power Dissipation (PD) | 5.0 W at TL < 25 °C - requires thermal management below 25 °C lead temperature or derating per Figure 1 |
| Dynamic Impedance (ZZT) | 350 Ω max at 8.0 mA - determines regulation stiffness and output ripple rejection |
| Surge Current (IZSM) | 1650 A peak (8.3 ms half-sine) - enables single-event transient suppression without failure |
| Reverse Leakage (IR) | 0.5 µA max at 122 V - ensures low standby power loss in high-impedance bias networks |
| Junction Temp Range | −65 °C to +150 °C - supports operation in automotive under-hood and industrial motor drive environments |
| Thermal Resistance RθJA | 90 °C/W on FR4 (1 oz Cu) - dictates minimum copper area needed for safe continuous operation |
Pinout & Package
DO-215AA gull-wing surface-mount package with cathode indicated by band; anode and cathode terminals only - polarity-critical for reverse-bias operation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Cathode (banded end) | Positive terminal in reverse-bias configuration | Connected to regulated node; must be held at higher potential than anode during Zener operation |
| Anode | Negative terminal in reverse-bias configuration | Typically tied to system ground or return path; completes current loop during regulation |
Key Features
| Feature | Design Value |
|---|---|
| JEDEC 1N5384B equivalence | Identical electrical specs and test methods - enables drop-in replacement in legacy designs |
| RoHS-compliant matte-tin plating | Meets lead-free reflow requirements (260 °C, 10 s) without Sn/Pb eutectic limitations |
| Level 1 moisture sensitivity | No dry pack or baking required before assembly - reduces manufacturing overhead |
| Gull-wing lead form | Enables optical inspection of solder fillets - improves process yield in automated SMT lines |
| High surge current capability | 1650 A non-repetitive rating - protects downstream circuitry from lightning-induced transients |
Applications
| Industrial Power Supply Feedback | Telecom DC Bus Protection |
|---|---|
Use Scenario: Regulates reference voltage in isolated flyback converter feedback network using optocoupler-coupled error amplifier. IC Role / Device Role / Timing Role: Zener diode provides stable 160 V reference for TL431-like shunt regulator stage. Use Value: Tight ±5% tolerance and low ZZT ensure <±0.5% output voltage variation across line/load/temperature. | Use Scenario: Clamps 48 V telecom rectifier output against load-dump transients exceeding 200 V. IC Role / Device Role / Timing Role: Standby Zener clamp activated only during overvoltage events; normally non-conducting. Use Value: 1650 A surge rating absorbs 8.3 ms transients without degradation, preserving downstream DC-DC converters. |
| Automotive Battery Monitoring | Test Equipment High-Voltage Reference |
Use Scenario: Scales 12–16 V battery voltage to 160 V for ADC input in high-side monitor IC with internal 1 V reference. IC Role / Device Role / Timing Role: Precision Zener establishes fixed 160 V rail for resistor-divider attenuation network. Use Value: −65 °C to +150 °C operating range ensures reliability in engine compartment mounting locations. | Use Scenario: Provides calibrated 160 V reference in programmable high-voltage source calibration module. IC Role / Device Role / Timing Role: Stable Zener voltage serves as traceable secondary standard for meter verification. Use Value: Low IR (0.5 µA) and minimal VZ drift vs. current enable repeatable 0.1% calibration accuracy. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Zener regulation applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| 1N5384BRLG | Same 160 V ±5%, but axial T-18 package; RθJA ≈ 120 °C/W; no RoHS compliance (Sn/Pb) | Requires through-hole assembly; unsuitable for high-density SMT boards | Select when legacy through-hole production or cost-sensitive non-RoHS programs dominate |
| SMBJ5384B | Same electrical specs, but DO-214AA J-bend package; identical RoHS status and surge rating | Different footprint and solder joint geometry - requires PCB redesign | Choose if existing DO-214AA layout exists or preferred for mechanical robustness in vibration-prone systems |
Compared with SMBG5384BE3/TR13, 1N5384BRLG offers identical regulation but lacks surface-mount compatibility and RoHS compliance, while SMBJ5384B matches all electrical and environmental specs but demands different pad layout and reflow profile validation.
Availability
SMBG5384BE3/TR13 is available at Aetrix Electronics and suitable for industrial power supplies, telecom infrastructure equipment, and automotive battery monitoring systems requiring stable component supply and long-term obsolescence management.
Supply support for SMBG5384BE3/TR13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Microsemi Corporation (now part of Microchip Technology) is a U.S.-based semiconductor company specializing in high-reliability analog, RF, and timing solutions for aerospace, defense, and industrial markets.
The SMBG53xxB series was designed specifically for surface-mount 5 W Zener regulation in space-constrained, high-surge environments - emphasizing JEDEC compatibility, visual solder inspection, and moisture-insensitive packaging.
FAQ
What is the Zener voltage tolerance for SMBG5384BE3/TR13?
The SMBG5384BE3/TR13 has a ±5% Zener voltage tolerance, indicated by the "B" suffix in its part number. This means its measured VZ at 8.0 mA test current falls between 152 V and 168 V at TL = 25 °C. The tolerance is verified per JEDEC test methods and applies across the full operating temperature range of −65 °C to +150 °C.
Does SMBG5384BE3/TR13 require dry packing before SMT assembly?
No, SMBG5384BE3/TR13 does not require dry packing. It carries IPC/JEDEC J-STD-020B moisture sensitivity level 1, meaning it can be stored indefinitely at ambient conditions (<30 °C / 60% RH) without baking. This eliminates pre-reflow drying steps and simplifies manufacturing logistics for high-volume SMT lines.
What is the maximum surge current rating for SMBG5384BE3/TR13?
The SMBG5384BE3/TR13 is rated for 1650 A peak non-repetitive surge current (IZSM) under an 8.3 ms half-sine waveform. This value is specified in the Electrical Characteristics table on page 3 of the Microsemi datasheet T4-LDS-0246-1 and reflects its capability to absorb transient energy without parametric shift or catastrophic failure.
How does the DO-215AA package of SMBG5384BE3/TR13 differ from DO-214AA?
The DO-215AA package of SMBG5384BE3/TR13 uses gull-wing leads for visible solder joint inspection, whereas DO-214AA (used in SMBJ5384B) employs J-bend leads. Both are surface-mount, but DO-215AA allows optical verification of solder fillets and has slightly lower RθJA (90 °C/W vs. ~100 °C/W for DO-214AA on identical FR4 layout).
Is SMBG5384BE3/TR13 compatible with lead-free reflow profiles?
Yes, SMBG5384BE3/TR13 features RoHS-compliant annealed matte-tin plating and is qualified for lead-free reflow up to 260 °C for 10 seconds, per MIL-STD-750 method 2026. Its plastic body meets UL94V-0 flammability rating, and the "e3" suffix explicitly confirms RoHS compliance per EU Directive 2011/65/EU.
SMBG5384BE3/TR13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- -
- Package/Case:
- DO-215AA, SMB Gull Wing
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Voltage - Zener (Nom) (Vz):
- 160 V
- Tolerance:
- ±5%
- Power - Max:
- 5 W
- Impedance (Max) (Zzt):
- 350 Ohms
- Current - Reverse Leakage @ Vr:
- 500 nA @ 115 V
- Voltage - Forward (Vf) (Max) @ If:
- 1.2 V @ 1 A
- Operating Temperature:
- -65°C ~ 150°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DO-214AA (SMBG)
SMBG5384BE3/TR13 FAQ
1.How can I place an order for SMBG5384BE3/TR13 through Aetrix?
Please submit a Request for Quotation (RFQ) for SMBG5384BE3/TR13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SMBG5384BE3/TR13 reliable?
The price and inventory of SMBG5384BE3/TR13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SMBG5384BE3/TR13 is usually 5 days.
3.What payment methods are accepted for SMBG5384BE3/TR13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SMBG5384BE3/TR13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SMBG5384BE3/TR13?
SMBG5384BE3/TR13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SMBG5384BE3/TR13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SMBG5384BE3/TR13?
For technical support, including SMBG5384BE3/TR13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SMBG5384BE3/TR13 requirements.
6.How does Aetrix verify that SMBG5384BE3/TR13 is sourced from the original manufacturer or authorized distributors?
All SMBG5384BE3/TR13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SMBG5384BE3/TR13 meets industry standards.
7.What is the process for return or replacement of SMBG5384BE3/TR13?
All SMBG5384BE3/TR13 units undergo pre-shipment inspection (PSI). If there is an issue with SMBG5384BE3/TR13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SMBG5384BE3/TR13 part is unused and in its original packaging.
Return procedure for SMBG5384BE3/TR13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SMBG5384BE3/TR13 Tags
-
MMBZ5240B-7-F
Diodes Incorporated
-
BZT52C5V6T-7
Diodes Incorporated
-
MMSZ5231B-7-F
Diodes Incorporated
-
BZT52C15-7-F
Diodes Incorporated
-
BZX84C3V3LT1G
onsemi
-
MMSZ5245BS-7-F
Diodes Incorporated
-
MMSZ4682T1G
onsemi
-
BZT52C15S-7-F
Diodes Incorporated
-
MM5Z5V1ST1G
onsemi
-
SMAJ4744A-TP
Micro Commercial Co
-
BZT52C3V6LP-7
Diodes Incorporated
-
SMAZ12-13-F
Diodes Incorporated
Tech Hub
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
