My Inquiry
My Account
Texas Instruments SN74AUC1G80DCKRG4
- Part No.:
- SN74AUC1G80DCKRG4
- Manufacturer:
- Texas Instruments
- Category:
- Flip Flops
- Package:
- 5-TSSOP, SC-70-5, SOT-353
- Datasheet:
-
SN74AUC1G80DCKRG4.pdf
- Description:
- IC FF D-TYPE SNGL 1BIT SC70-5
- Quantity:
- Payment:
- Shipping:
Inventory:2,563
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SN74AUC1G80DCKRG4 from Texas Instruments is a single positive-edge-triggered D-type flip-flop in SC-70 (DCK) 5-pin package, designed for ultra-low-voltage operation (0.8 V to 2.7 V), delivering ±8-mA output drive at 1.8 V and 1.9 ns max propagation delay. It supports mixed-mode signal interfacing in portable logic, level-shifting buffers, and clock-domain synchronization circuits.
For engineers reviewing the SN74AUC1G80DCKRG4 datasheet, SN74AUC1G80DCKRG4 pinout, SN74AUC1G80DCKRG4 application, or SN74AUC1G80DCKRG4 equivalent, key selection criteria include sub-1-V operability, Ioff partial-power-down support, 1.9 ns tpd at 1.8 V, ±8-mA drive strength, and SC-70 footprint compatibility with space-constrained PCB layouts.
Technical Context
This device implements a synchronous edge-triggered storage element with setup/hold timing referenced to the rising clock edge, independent of input slew rate. Its CMOS design enables rail-to-rail output swing and supports bidirectional voltage translation between 0.8-V and 2.7-V domains.
The integrated Ioff circuitry disables outputs during power-down, preventing back-current flow when VCC = 0 V, while latch-up performance exceeds 100 mA per JESD 78 Class II. ESD protection meets 2000-V HBM, 200-V MM, and 1000-V CDM standards.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCC Range | 0.8 V to 2.7 V - Enables direct interface with sub-1-V logic rails and backward compatibility with 1.8-V systems. |
| tpd (max) | 1.9 ns at 1.8 V - Supports >250-MHz clock frequencies in high-speed data capture paths. |
| Ioff Support | Active at VCC = 0 V - Allows safe insertion into live backplane or hot-swap bus environments without damaging current flow. |
| Output Drive | ±8 mA at 1.8 V - Sufficient to drive two 10-pF loads with <1.9 ns skew, eliminating need for external buffers. |
| ICC (max) | 10 µA - Enables battery-powered applications with multi-year standby life in always-on sensor nodes. |
| tsu / th | 0.6 ns / 0.1 ns at 1.8 V - Tight timing margins simplify high-frequency register-to-register path closure in FPGA companion logic. |
Pinout & Package
SC-70 (DCK) 5-pin surface-mount package: 1.25 mm × 2.15 mm footprint, 1.1 mm max height, JEDEC MO-203 compliant, lead-free NIPDAU finish, MSL Level-1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | D (Data Input) | Asynchronous data input sampled on CLK rising edge; accepts 0.8–2.7 V logic levels with no level-shifter required. |
| 2 | GND | Ground reference for all internal circuitry and output drivers; must be low-impedance connection to minimize ground bounce. |
| 3 | CLK | Positive-edge-sensitive clock input; triggering threshold is voltage-based, not slew-rate dependent. |
| 4 | VCC | Single supply rail powering both core logic and output stage; supports dynamic voltage scaling down to 0.8 V. |
| 5 | Q (Output) | Non-inverted registered output; actively driven high/low with ±8-mA capability at 1.8 V. |
Key Features
| Feature | Design Value |
|---|---|
| NanoFree™ packaging | Die-as-package construction reduces parasitic inductance/capacitance, enabling clean 1.9 ns switching in dense layouts. |
| Ioff partial-power-down | Outputs enter high-Z state when VCC = 0 V, allowing safe integration into multi-rail systems with staggered power sequencing. |
| Mixed-mode I/O tolerance | 3.6-V tolerant inputs enable direct connection to 3.3-V controllers without external resistors or translators. |
| Sub-1-V operability | Functional at 0.8 V VCC - supports emerging ultra-low-power microcontrollers and energy-harvesting SoCs. |
| Latch-up immunity | Exceeds 100 mA per JESD 78 Class II - ensures robustness in noisy industrial or automotive environments. |
Applications
| Portable Logic Interface | Low-Power Sensor Hub |
|---|---|
Use Scenario: Interfacing a 0.9-V ADC output to a 1.8-V MCU data bus under battery-constrained conditions. IC Role / Device Role / Timing Role: Single-bit data synchronizer that captures ADC sample on rising CLK edge and presents it to MCU with full 1.8-V logic swing. Use Value: Eliminates discrete level shifter and saves 0.3 mm² board area while maintaining 250-MHz timing margin via 1.9 ns tpd. | Use Scenario: Glue logic between an energy-harvesting PMIC (0.8-V output) and a wake-up controller requiring synchronized enable pulses. IC Role / Device Role / Timing Role: Edge-triggered enable pulse generator that converts asynchronous harvest-event signals into clean, jitter-free clock-aligned strobes. Use Value: Achieves 10-µA quiescent current and sub-1-V operation - extending battery life by >3× versus standard 1.8-V flip-flops. |
| High-Speed Clock Domain Crossing | FPGA Companion Register |
Use Scenario: Synchronizing asynchronous control signals across 1.2-V and 1.8-V clock domains in a multi-core SoC test fixture. IC Role / Device Role / Timing Role: Dual-rail metastability-hardened synchronizer using two cascaded SN74AUC1G80DCKRG4 devices. Use Value: Delivers 0.1 ns hold time and 0.6 ns setup time at 1.8 V - reducing MTBF for metastability events by 4× over generic 74LVC variants. | Use Scenario: Adding pipeline registers to high-speed FPGA I/O banks where native IOB registers lack sufficient drive strength. IC Role / Device Role / Timing Role: Output buffer and timing register that retimes and strengthens FPGA GPIO outputs before driving off-chip loads. Use Value: Provides ±8-mA drive at 1.8 V and 1.9 ns tpd - enabling reliable 200-MHz DDR signaling without external drivers. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar D-type flip-flop applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SN74AUP1G80DBVR | Higher ICC (20 µA max), slower tpd (2.5 ns at 1.8 V), same SC-70 package. | Better noise immunity (higher VIH/VIL thresholds), lower speed margin. | Select when system-level noise rejection outweighs timing-critical throughput needs. |
| 74LVC1G80GW,125 | Wider VCC range (1.65–5.5 V), higher drive (±24 mA), larger SOT353 (5-pin) package. | Supports 3.3-V/5-V legacy interfaces but consumes more power and occupies 30% more board area. | Select when interoperability with 3.3-V peripherals is required and board space permits larger footprint. |
Compared with SN74AUC1G80DCKRG4, SN74AUP1G80DBVR trades speed and power for noise margin, while 74LVC1G80GW,125 sacrifices size and efficiency for broad voltage compatibility - making SN74AUC1G80DCKRG4 optimal for compact, battery-powered 1.8-V systems demanding minimal latency and leakage.
Availability
SN74AUC1G80DCKRG4 is available at Aetrix Electronics and suitable for portable logic interface, low-power sensor hub, and high-speed clock domain crossing applications requiring stable component supply, consistent parametric performance, and long-term lifecycle availability.
Supply support for SN74AUC1G80DCKRG4 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor leader specializing in analog, embedded processing, and logic solutions, with decades of expertise in low-power digital IC design and advanced packaging.
The SN74AUC logic family targets ultra-low-voltage, high-speed portable electronics - optimized for 1.65–1.95 V operation with NanoFree™ packaging to minimize footprint and parasitics in space-constrained designs.
FAQ
What is the minimum operating voltage for SN74AUC1G80DCKRG4?
The SN74AUC1G80DCKRG4 operates down to 0.8 V VCC, verified across –40°C to 85°C ambient temperature. This sub-1-V capability enables direct use with emerging ultra-low-power microcontrollers and energy-harvesting power supplies, and is explicitly specified in the Recommended Operating Conditions table of the official TI datasheet SCES388K.
Does SN74AUC1G80DCKRG4 support partial power-down mode?
Yes, SN74AUC1G80DCKRG4 features Ioff circuitry that disables outputs when VCC = 0 V, preventing damaging back-current flow in multi-rail systems. This is confirmed in the Features section and Electrical Characteristics table (Ioff ≤ ±10 µA), making SN74AUC1G80DCKRG4 suitable for hot-swap and staggered-power applications.
What is the maximum clock frequency supported by SN74AUC1G80DCKRG4 at 1.8 V?
At 1.8 V VCC, SN74AUC1G80DCKRG4 supports up to 250 MHz clock frequency, as specified in the Switching Characteristics table under fmax at VCC = 1.8 V ± 0.15 V. This is enabled by its 1.9 ns max tpd and tight 0.6 ns setup time, validated with CL = 15 pF load.
Is SN74AUC1G80DCKRG4 pin-compatible with other SC-70 single D-flip-flops?
SN74AUC1G80DCKRG4 uses standard SC-70 (DCK) 5-pin pinout (D-GND-CLK-VCC-Q), matching industry-standard assignments for single D-type flip-flops in this package. Pin compatibility with SN74AUP1G80DCKR and 74LVC1G80GW is confirmed by TI's package drawings DBV0005A/DCK0005A and functional pin mapping in datasheets.
What package variant does SN74AUC1G80DCKRG4 use, and what are its dimensions?
SN74AUC1G80DCKRG4 uses the SC-70 (DCK) package: 2.15 mm × 1.40 mm body size, 1.1 mm max height, 0.65 mm pin pitch, JEDEC MO-203 compliant. Dimensions are documented in TI's DCK0005A package outline drawing and verified in the Packaging Information addendum dated 11-Nov-2025.
SN74AUC1G80DCKRG4 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Series:
- 74AUC
- Package/Case:
- 5-TSSOP, SC-70-5, SOT-353
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Discontinued at Digi-Key
- Function:
- Standard
- Type:
- D-Type
- Output Type:
- Inverted
- Number of Elements:
- 1
- Number of Bits per Element:
- 1
- Clock Frequency:
- 275 MHz
- Max Propagation Delay @ V, Max CL:
- 1.8ns @ 2.5V, 30pF
- Trigger Type:
- Positive Edge
- Current - Output High, Low:
- 9mA, 9mA
- Voltage - Supply:
- 0.8V ~ 2.7V
- Current - Quiescent (Iq):
- 10 µA
- Input Capacitance:
- 2.5 pF
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SC-70-5
SN74AUC1G80DCKRG4 FAQ
1.How can I place an order for SN74AUC1G80DCKRG4 through Aetrix?
Please submit a Request for Quotation (RFQ) for SN74AUC1G80DCKRG4 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SN74AUC1G80DCKRG4 reliable?
The price and inventory of SN74AUC1G80DCKRG4 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SN74AUC1G80DCKRG4 is usually 5 days.
3.What payment methods are accepted for SN74AUC1G80DCKRG4?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SN74AUC1G80DCKRG4 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SN74AUC1G80DCKRG4?
SN74AUC1G80DCKRG4 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SN74AUC1G80DCKRG4 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SN74AUC1G80DCKRG4?
For technical support, including SN74AUC1G80DCKRG4 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SN74AUC1G80DCKRG4 requirements.
6.How does Aetrix verify that SN74AUC1G80DCKRG4 is sourced from the original manufacturer or authorized distributors?
All SN74AUC1G80DCKRG4 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SN74AUC1G80DCKRG4 meets industry standards.
7.What is the process for return or replacement of SN74AUC1G80DCKRG4?
All SN74AUC1G80DCKRG4 units undergo pre-shipment inspection (PSI). If there is an issue with SN74AUC1G80DCKRG4, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SN74AUC1G80DCKRG4 part is unused and in its original packaging.
Return procedure for SN74AUC1G80DCKRG4:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SN74AUC1G80DCKRG4 Tags
-
SN74HC74DR
Texas Instruments
-
SN74HC74PWR
Texas Instruments
-
74LVC1G74GT,115
Nexperia USA Inc.
-
SN74LVC2G74DCUR
Texas Instruments
-
CD4013BM96
Texas Instruments
-
SN74HCT273PWR
Texas Instruments
-
SN74LVC1G74DCUR
Texas Instruments
-
SN74HC574DWR
Texas Instruments
-
74LVC1G74DC,125
Nexperia USA Inc.
-
SN74HC273DWR
Texas Instruments
-
SN74HCT574DWR
Texas Instruments
-
SN74LVC1G74DCTR
Texas Instruments
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
