My Inquiry
My Account
NXP Semiconductors SPC5604BK0CLL6
- Part No.:
- SPC5604BK0CLL6
- Manufacturer:
- NXP Semiconductors
- Category:
- Microcontrollers
- Package:
- 100-LQFP
- Datasheet:
-
SPC5604BK0CLL6.pdf
- Description:
- IC MCU 32BIT 512KB FLASH 100LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:4,076
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SPC5604BK0CLL6 from NXP Semiconductors is a 32-bit automotive microcontroller based on the Power Architecture e200z0h core, operating up to 64 MHz with 512 KB code flash, 48 KB SRAM (ECC-protected), and integrated FlexCAN, LINFlex, DSPI, and 10-bit ADC for body electronics control. It targets automotive door modules, seat controllers, and lighting systems requiring ASIL-B functional safety support.
For engineers reviewing the SPC5604BK0CLL6 datasheet, SPC5604BK0CLL6 pinout, SPC5604BK0CLL6 application, or SPC5604BK0CLL6 equivalent, key selection criteria include its 144-pin LQFP package, FMPLL clock generation, Nexus 2+ debug interface, and compliance with ISO 26262 requirements for automotive ECU design.
Technical Context
The SPC5604BK0CLL6 implements a single-issue e200z0h CPU with Variable Length Encoding (VLE) for reduced code footprint and integrates a 64-bit crossbar switch enabling concurrent access to flash, SRAM, and peripherals by multiple bus masters. Its memory protection unit (MPU) provides eight region descriptors with 32-byte granularity for secure partitioning of code and data spaces.
It features a Frequency-Modulated PLL (FMPLL) supporting programmable frequency modulation for EMI reduction, boot assist module (BAM) for serial flash programming via CAN/SCI, and real-time counter (RTC) with autonomous wakeup from low-power modes using internal 128 kHz RC oscillator at 1 ms resolution.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | e200z0h, Power Architecture embedded category, VLE instruction set for 30% average code size reduction |
| Max Clock Speed | 64 MHz - enables deterministic real-time response in automotive body control applications |
| Code Flash | 512 KB with ECC - supports robust firmware storage and error correction for ASIL-B compliance |
| SRAM | 48 KB with ECC - provides fault-tolerant working memory for safety-critical tasks |
| ADC Resolution | 10-bit - delivers sufficient dynamic range for sensor signal acquisition in HVAC and lighting control |
| FlexCAN Channels | 6 - enables multi-bus communication for distributed vehicle networks including gateway and node roles |
| Package | 144-pin LQFP (20 × 20 × 1.4 mm) - standard automotive-grade surface-mount package with thermal and mechanical reliability |
Pinout & Package
SPC5604BK0CLL6 uses a 144-pin LQFP package (20 × 20 × 1.4 mm) with dedicated voltage supply pins (VDD_HV/VSS_HV, VDD_LV/VSS_LV, VDD_BV), analog reference pins (VDD_HV_ADC/VSS_HV_ADC), and system pins (RESET, EXTAL, XTAL). All I/O pins support configurable pad types (S/M/F) and alternate functions via SIUL PCR registers.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| RESET | Reset input with Schmitt-trigger and noise filter | Bidirectional active-low reset with weak pull-up only after PHASE2 completion; critical for safe power-on initialization |
| EXTAL / XTAL | Crystal oscillator interface | Tristate during reset; supports 4–16 MHz external crystal or bypass mode for clock source flexibility |
| VDD_HV / VSS_HV | Digital supply and ground | Multiple distributed pairs ensure stable 3.3 V digital rail and low-impedance return paths for noise immunity |
| VDD_LV / VSS_LV | 1.2 V regulator decoupling | Three dedicated pairs require local 100 nF capacitors per pair to stabilize internal core voltage |
| PA[7] | GPIO / LIN3TX | Configurable as general-purpose I/O or LINFlex_3 transmit output - supports LIN 2.2 protocol for body network nodes |
Key Features
| Feature | Design Value |
|---|---|
| FMPLL with frequency modulation | Reduces electromagnetic interference (EMI) by spreading spectral energy - essential for automotive EMC compliance |
| Nexus 2+ development interface | IEEE-ISTO 5001-2003 Class Two Plus compliant - enables real-time trace, breakpoint, and memory access during debug |
| Boot Assist Module (BAM) | Enables in-system flash programming over CAN or SCI without external debugger - simplifies field firmware updates |
| Memory Protection Unit (MPU) | 8-region descriptor with 32-byte granularity - enforces isolation between application, OS, and safety monitor partitions |
| Real-Time Counter (RTC) | Autonomous wakeup from stop mode using 128 kHz RC oscillator with 1 ms resolution and 2 s max timeout - extends battery life in always-on modules |
Applications
| Door Control Module | Seat Position Controller |
|---|---|
Use Scenario: Centralized control of power windows, locks, mirrors, and interior lighting in automotive door modules. IC Role / Device Role / Timing Role: Main application processor executing motor control algorithms, LIN communication with body domain controller, and real-time PWM generation for window lifters. Use Value: Integrated 6 FlexCAN channels and 4 LINFlex modules enable seamless integration into multi-bus vehicle architectures without external bridge ICs. | Use Scenario: Motorized adjustment of seat position, lumbar support, and heating elements in premium vehicle seating systems. IC Role / Device Role / Timing Role: Safety-aware controller managing dual H-bridge drivers, potentiometer feedback, and thermal monitoring with ASIL-B software partitioning. Use Value: 48 KB ECC-protected SRAM and MPU support runtime separation of safety-critical seat movement logic from non-safety UI functions. |
| LED Headlight Driver | Body Control Module (BCM) |
Use Scenario: Dynamic control of adaptive LED headlight arrays with dimming, flashing, and diagnostics in modern lighting systems. IC Role / Device Role / Timing Role: High-precision PWM generator (via eMIOS-lite) synchronizing LED current regulation with CAN-based command inputs and thermal shutdown signals. Use Value: 16-bit eMIOS channels with input capture and output compare deliver sub-microsecond timing accuracy required for flicker-free LED modulation. | Use Scenario: Centralized management of vehicle-wide functions including lighting, wipers, horn, and immobilizer in entry-level BCM designs. IC Role / Device Role / Timing Role: Host MCU coordinating LIN slave nodes (e.g., door modules), processing discrete inputs, and driving relay outputs via GPIO and PWM. Use Value: 123 configurable GPIO pins (package-dependent) and integrated 10-bit ADC allow direct sensing of switches, thermistors, and potentiometers without external components. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar automotive microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MPC5604BK0CLL6 | Same silicon die, identical electrical specs and pinout - differs only in branding and ordering channel | No functional difference; both qualified for automotive AEC-Q100 Grade 2 (−40°C to +105°C) | Select SPC5604BK0CLL6 for direct NXP distribution channel fulfillment; MPC5604BK0CLL6 for legacy procurement paths |
| SPC5605BK0MLL6 | Enhanced variant with 1 MB flash, 96 KB SRAM, and additional eMIOS channels; same 144-LQFP footprint | Supports larger AUTOSAR stacks and more complex motor control algorithms; requires updated BSP and flash layout | Choose when future scalability, higher memory density, or extended peripheral count is required beyond current SPC5604BK0CLL6 capabilities |
Compared with MPC5604BK0CLL6, SPC5604BK0CLL6 offers identical functionality and qualification while aligning with NXP's current product branding; SPC5605BK0MLL6 provides memory and peripheral headroom for next-generation body control applications without PCB redesign.
Availability
SPC5604BK0CLL6 is available at Aetrix Electronics and suitable for automotive door modules, seat position controllers, and LED headlight driver designs requiring stable component supply, long-term lifecycle support, and AEC-Q100 qualification.
Supply support for SPC5604BK0CLL6 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
NXP Semiconductors is a global semiconductor company specializing in secure connectivity solutions for automotive, industrial, and IoT applications, with leadership in automotive MCUs and radar technology.
The SPC5604BK0CLL6 belongs to the SPC560x family designed specifically for cost-optimized, ASIL-B-capable automotive body electronics, emphasizing low-power operation, functional safety features, and seamless integration with existing Power Architecture toolchains.
FAQ
What is the maximum operating temperature range for the SPC5604BK0CLL6?
The SPC5604BK0CLL6 is qualified per AEC-Q100 Grade 2, supporting continuous operation from −40°C to +105°C ambient temperature. This rating is validated across all electrical parameters in the datasheet, including flash endurance, SRAM retention, and ADC linearity, making it suitable for under-hood and cabin-mounted automotive ECUs where thermal stress is present. The SPC5604BK0CLL6 maintains full functionality within this range without derating.
Does the SPC5604BK0CLL6 support AUTOSAR-compliant software stacks?
Yes, the SPC5604BK0CLL6 supports AUTOSAR 4.x-compliant software stacks through NXP's S32DS IDE and MCAL drivers. Its System Timer Module (STM), periodic interrupt timers (PIT), and Nexus 2+ interface provide the precise timing, interrupt latency control, and real-time debugging required for AUTOSAR OS scheduling and BSW execution. The SPC5604BK0CLL6 has been validated with leading AUTOSAR tool providers for body electronics use cases.
How many CAN interfaces does the SPC5604BK0CLL6 include, and what protocol versions are supported?
The SPC5604BK0CLL6 integrates six FlexCAN modules supporting CAN 2.0A/B protocols with configurable message buffers and hardware filtering. Each module operates independently at bit rates up to 1 Mbps and supports loopback, self-test, and wake-on-CAN functionality. These interfaces are fully compatible with automotive body network topologies and do not require external transceivers - the SPC5604BK0CLL6 handles protocol framing and arbitration internally.
Is the SPC5604BK0CLL6 pin-compatible with other members of the SPC560x family?
The SPC5604BK0CLL6 shares the same 144-pin LQFP package and pinout with SPC5604BK0CLL6 and MPC5604BK0CLL6 variants, but is not pin-compatible with SPC5605BK0MLL6 despite identical footprint - differences in peripheral multiplexing and power pin assignments require PCB revision. Always verify SIUL configuration and voltage domain routing before substitution. The SPC5604BK0CLL6 pin mapping is fixed per Figure 5 in the MPC5604B/C datasheet Rev. 15.
What debug interface does the SPC5604BK0CLL6 provide, and is JTAG available?
The SPC5604BK0CLL6 provides both Nexus 2+ (IEEE-ISTO 5001-2003 Class Two Plus) and JTAG (IEEE 1149.1) interfaces. Nexus 2+ supports real-time trace, complex breakpoints, and memory access during active execution, while JTAG enables boundary-scan testing and basic programming. Both interfaces share physical pins (TCK/TMS/TDI/TDO/MDOx/EVTO/MCKO), with mode selection controlled by boot configuration. The SPC5604BK0CLL6 fully supports NXP's S32DS and third-party debug tools via either interface.
SPC5604BK0CLL6 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- NXP Semiconductors
- Package/Case:
- 100-LQFP
- Series:
- MPC56xx Qorivva
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Core Processor:
- e200z0h
- Core Size:
- 32-Bit Single-Core
- Speed:
- 64MHz
- Connectivity:
- CANbus, I2C, LINbus, SCI, SPI
- Peripherals:
- DMA, POR, PWM, WDT
- Number of I/O:
- 79
- Program Memory Size:
- 512KB (512K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 64K x 8
- RAM Size:
- 32K x 8
- Voltage - Supply (Vcc/Vdd):
- 3V ~ 5.5V
- Data Converters:
- A/D 28x10b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
SPC5604BK0CLL6 FAQ
1.How can I place an order for SPC5604BK0CLL6 through Aetrix?
Please submit a Request for Quotation (RFQ) for SPC5604BK0CLL6 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SPC5604BK0CLL6 reliable?
The price and inventory of SPC5604BK0CLL6 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SPC5604BK0CLL6 is usually 5 days.
3.What payment methods are accepted for SPC5604BK0CLL6?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SPC5604BK0CLL6 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SPC5604BK0CLL6?
SPC5604BK0CLL6 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SPC5604BK0CLL6 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SPC5604BK0CLL6?
For technical support, including SPC5604BK0CLL6 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SPC5604BK0CLL6 requirements.
6.How does Aetrix verify that SPC5604BK0CLL6 is sourced from the original manufacturer or authorized distributors?
All SPC5604BK0CLL6 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SPC5604BK0CLL6 meets industry standards.
7.What is the process for return or replacement of SPC5604BK0CLL6?
All SPC5604BK0CLL6 units undergo pre-shipment inspection (PSI). If there is an issue with SPC5604BK0CLL6, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SPC5604BK0CLL6 part is unused and in its original packaging.
Return procedure for SPC5604BK0CLL6:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SPC5604BK0CLL6 Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
