My Inquiry
My Account
Microchip Technology SST26VF016BT-104V/MF70SVAO
- Part No.:
- SST26VF016BT-104V/MF70SVAO
- Manufacturer:
- Microchip Technology
- Category:
- Memory
- Package:
- 8-WDFN Exposed Pad
- Datasheet:
-
SST26VF016BT-104V/MF70SVAO.pdf
- Description:
- IC FLASH 16MBIT SPI/QUAD 8WDFN
- Quantity:
- Payment:
- Shipping:
Inventory:3,649
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
SST26VF016BT-104V/MF70SVAO from Microchip Technology is a 16 Mbit Serial Quad I/O™ (SQI™) flash memory IC operating at up to 104 MHz (2.7–3.6 V), featuring uniform 4 KByte sectors, 256-byte page programming, and flexible block protection with OTP Security ID. It serves as non-volatile program/data storage in microcontroller boot loaders and firmware update systems.
For engineers reviewing the SST26VF016BT-104V/MF70SVAO datasheet, SST26VF016BT-104V/MF70SVAO pinout, SST26VF016BT-104V/MF70SVAO application, or SST26VF016BT-104V/MF70SVAO equivalent, key selection criteria include SQI vs. SPI mode compatibility, industrial temperature support (−40°C to +85°C), WDFN-8 (6 mm × 5 mm) package footprint, and hardware write-protection via WP# pin with lock-down capability.
Technical Context
This device implements a six-wire, 4-bit multiplexed I/O interface supporting both traditional SPI (x1/x2 modes) and high-speed SQI protocol - enabling quad-data-rate transfers without increasing pin count. Its SuperFlash® technology uses split-gate cells and thick-oxide tunneling for enhanced endurance (100,000 cycles) and data retention (>100 years).
It integrates dual-mode operation: default SPI mode after power-on reset, configurable to SQI mode via EQIO command. The internal architecture includes dedicated status/configuration registers, programmable block-protection logic, and a 2 KByte one-time-programmable Security ID space with factory-preprogrammed 64-bit unique identifier.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 16 Mbit (2 MByte) organized in uniform 4 KByte sectors and overlay blocks |
| Max Clock Frequency | 104 MHz at 2.7–3.6 V; enables 416 MB/s effective throughput in SQI x4 mode |
| Supply Voltage Range | 2.3–3.6 V single supply; supports low-voltage operation down to 2.3 V with reduced max frequency (80 MHz) |
| Endurance & Retention | 100,000 program/erase cycles minimum; >100 years data retention at 85°C |
| Active Read Current | 15 mA typical at 104 MHz - critical for power-constrained embedded systems |
| Standby Current | 15 µA typical - enables ultra-low-power sleep states in battery-powered devices |
| Erase Time | 18 ms typical sector/64 KByte block erase; 35 ms typical chip erase |
| Page Program Size | 256 bytes per page in x1 or x4 mode - balances write granularity and efficiency |
Pinout & Package
Package: 8-contact WDFN (6 mm × 5 mm), RoHS-compliant, industrial temperature grade (−40°C to +85°C).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| CE# | Chip Enable | Active-low chip select; must remain low during full command sequence including address/data transfer |
| SIO[3:0] / SI/SO / WP#/HOLD# | Quad I/O / SPI Data / Protection Control | Multiplexed serial I/O pins; default SPI mode uses SI/SO; EQIO command enables quad I/O; WP# and HOLD# share pins in SPI mode only |
| SCK | Serial Clock | Timing reference for all serial transfers; rising edge latches input, falling edge outputs data |
| VDD | Power Supply | Primary 2.3–3.6 V supply rail; decoupling required near pin for noise immunity |
| VSS | Ground | Reference ground for all I/O and internal circuitry; low-impedance connection essential |
Key Features
| Feature | Design Value |
|---|---|
| Serial Quad I/O™ Interface | Enables 4× data bandwidth over SPI at same clock frequency - reduces timing margin pressure in high-speed designs |
| Flexible Erase Architecture | Uniform 4 KByte sectors plus 8×8 KByte, 2×32 KByte, and 30×64 KByte overlay blocks - supports fine-grained firmware partitioning |
| Write-Suspend Capability | Allows interrupting active program/erase to service urgent reads - improves real-time system responsiveness |
| OTP Security ID | 2 KByte area with factory-programmed 64-bit unique ID and user-programmable region - enables secure device authentication and binding |
| Hardware Write Protection | WP# pin + WPEN/IOC bits enable robust, pin-level protection of configuration and protection registers - prevents accidental corruption during field updates |
| Deep Power-Down Mode | B9H command reduces current to <1 µA - extends battery life in always-on IoT endpoints |
Applications
| Industrial PLC Firmware Storage | Automotive ADAS Boot Memory |
|---|---|
Use Scenario: Storing firmware images and configuration parameters in programmable logic controllers deployed in factory automation environments. IC Role / Device Role / Timing Role: Non-volatile boot memory providing fast, reliable code execution on cold start and safe firmware updates over CAN or Ethernet. Use Value: AEC-Q100 qualification and −40°C to +85°C operation ensure reliability in harsh industrial settings; 104 MHz SQI read speed accelerates boot time by >3× versus legacy SPI flash. | Use Scenario: Holding boot code and calibration data for radar processing units in advanced driver-assistance systems. IC Role / Device Role / Timing Role: Secure, high-reliability storage for safety-critical boot firmware with tamper-resistant Security ID binding. Use Value: OTP Security ID and permanent block lock-down prevent unauthorized firmware modification; 100,000-cycle endurance supports frequent over-the-air updates. |
| Medical Imaging Device Configuration | Smart Energy Meter Firmware |
Use Scenario: Storing sensor calibration tables, UI assets, and regulatory compliance logs in portable ultrasound equipment. IC Role / Device Role / Timing Role: Low-power, high-integrity data storage with guaranteed >100-year retention for audit-trail records. Use Value: 15 µA standby current extends battery runtime between charges; write-suspend allows concurrent diagnostics and firmware patching. | Use Scenario: Hosting metering firmware and tariff tables in ANSI C12.22-compliant smart electricity meters deployed in utility grids. IC Role / Device Role / Timing Role: Field-upgradable program memory with hardware write protection to prevent malicious reprogramming. Use Value: WP# pin + lock-down register ensures configuration registers remain immutable during voltage transients; RoHS/WEEE compliance meets global utility procurement mandates. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Winbond W25Q16JVSNIQ | 16 Mbit SPI-only (no SQI); 133 MHz max; 4 KByte sectors; no OTP Security ID | Lacks quad I/O performance boost and hardware-based security features | Select when SQI bandwidth is unnecessary and cost sensitivity outweighs security requirements |
| Cypress S25FL116K0XMFI011 | 16 Mbit SPI/QPI; 85 MHz max; 4 KByte sectors; no OTP ID; different command set | Requires firmware adaptation for QPI mode; lacks dedicated Security ID and write-suspend | Choose for legacy Cypress ecosystem integration where SQI is not required |
Compared with SST26VF016BT-104V/MF70SVAO, W25Q16JVSNIQ offers higher SPI clock speed but omits SQI acceleration and security features, while S25FL116K0XMFI011 provides QPI compatibility at lower frequency and lacks OTP-based device identity - making SST26VF016BT-104V/MF70SVAO uniquely suited for secure, high-throughput embedded boot applications.
Availability
SST26VF016BT-104V/MF70SVAO is available at Aetrix Electronics and suitable for industrial control systems, automotive ADAS modules, medical imaging devices, and smart energy metering requiring stable component supply across extended product lifecycles.
Supply support for SST26VF016BT-104V/MF70SVAO includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Microchip Technology Inc. is a leading provider of microcontrollers, analog components, and memory solutions, serving industrial, automotive, and communications markets with vertically integrated silicon and software platforms.
The SST26VF016BT-104V/MF70SVAO belongs to Microchip's Serial Quad I/O™ flash family, engineered specifically for high-reliability embedded systems demanding faster boot times, secure firmware storage, and low-power operation in constrained PCB layouts.
FAQ
What is the operating temperature range for SST26VF016BT-104V/MF70SVAO?
The SST26VF016BT-104V/MF70SVAO is rated for industrial temperature operation from −40°C to +85°C. This specification is confirmed in the official Microchip datasheet DS20005262F and applies to the MF70SVAO suffix variant. It does not support extended (−40°C to +125°C) or automotive (−40°C to +105°C) grades - those require different part number suffixes.
Does SST26VF016BT-104V/MF70SVAO support both SPI and SQI protocols?
Yes, SST26VF016BT-104V/MF70SVAO supports both protocols. It powers up in standard SPI mode (x1/x2) for backward compatibility and can be configured into SQI mode using the EQIO command. In SQI mode, it uses SIO[3:0] for quad-data-rate transfers, delivering up to 416 MB/s effective bandwidth at 104 MHz - a 4× improvement over SPI x1 mode.
What package type is used for SST26VF016BT-104V/MF70SVAO?
SST26VF016BT-104V/MF70SVAO uses an 8-contact WDFN package measuring 6 mm × 5 mm. This is explicitly stated in the "Packages Available" section of the datasheet and confirmed by the "MF70SVAO" suffix, where "MF" denotes WDFN. It is not offered in SOIC or SOIJ variants under this specific part number.
How does the Security ID feature work in SST26VF016BT-104V/MF70SVAO?
The SST26VF016BT-104V/MF70SVAO includes a 2 KByte Security ID area comprising a factory-programmed 64-bit unique identifier and a user-programmable segment. The PSID command writes to the user area; LSID locks the entire space permanently. Once locked, no further writes are possible - ensuring cryptographic binding of firmware to hardware identity.
Can SST26VF016BT-104V/MF70SVAO be used in automotive applications?
Yes - SST26VF016BT-104V/MF70SVAO is AEC-Q100 qualified, as documented in the "Features" section of DS20005262F. However, its MF70SVAO suffix specifies industrial temperature grade (−40°C to +85°C), not automotive grade (−40°C to +105°C). For full automotive thermal compliance, a different suffix (e.g., "MA") would be required - verify qualification scope per application requirements.
SST26VF016BT-104V/MF70SVAO Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Microchip Technology
- Series:
- SST26 SQI®
- Package/Case:
- 8-WDFN Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH
- Memory Size:
- 16Mbit
- Memory Organization:
- 2M x 8
- Memory Interface:
- SPI - Quad I/O
- Clock Frequency:
- 104 MHz
- Write Cycle Time - Word, Page:
- 1.5ms
- Access Time:
- -
- Voltage - Supply:
- 2.7V ~ 3.6V
- Operating Temperature:
- -40°C ~ 105°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-WDFN (5x6)
SST26VF016BT-104V/MF70SVAO FAQ
1.How can I place an order for SST26VF016BT-104V/MF70SVAO through Aetrix?
Please submit a Request for Quotation (RFQ) for SST26VF016BT-104V/MF70SVAO on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for SST26VF016BT-104V/MF70SVAO reliable?
The price and inventory of SST26VF016BT-104V/MF70SVAO are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for SST26VF016BT-104V/MF70SVAO is usually 5 days.
3.What payment methods are accepted for SST26VF016BT-104V/MF70SVAO?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for SST26VF016BT-104V/MF70SVAO transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for SST26VF016BT-104V/MF70SVAO?
SST26VF016BT-104V/MF70SVAO orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your SST26VF016BT-104V/MF70SVAO order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for SST26VF016BT-104V/MF70SVAO?
For technical support, including SST26VF016BT-104V/MF70SVAO datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your SST26VF016BT-104V/MF70SVAO requirements.
6.How does Aetrix verify that SST26VF016BT-104V/MF70SVAO is sourced from the original manufacturer or authorized distributors?
All SST26VF016BT-104V/MF70SVAO products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that SST26VF016BT-104V/MF70SVAO meets industry standards.
7.What is the process for return or replacement of SST26VF016BT-104V/MF70SVAO?
All SST26VF016BT-104V/MF70SVAO units undergo pre-shipment inspection (PSI). If there is an issue with SST26VF016BT-104V/MF70SVAO, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The SST26VF016BT-104V/MF70SVAO part is unused and in its original packaging.
Return procedure for SST26VF016BT-104V/MF70SVAO:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
SST26VF016BT-104V/MF70SVAO Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
