STMicroelectronics STEVAL-CCA058V1

Overview

STEVAL-CCA058V1 from STMicroelectronics is a hands-on training kit for operational amplifier and comparator-based analog circuit design, featuring configurable DIP-adapted op-amps (TS921IDT, TSV991ILT, TSU101ILT, TSV7721ILT, TSV791ILT) and comparators (TS881ILT, TSX3702IST, TSX393IST), rail-to-rail input/output capability, sub-μA to 60 μA quiescent current, and bandwidths up to 50 MHz - used for academic labs and rapid prototyping of low-frequency analog signal conditioning.

For engineers reviewing the STEVAL-CCA058V1 datasheet, STEVAL-CCA058V1 pinout, STEVAL-CCA058V1 application, or STEVAL-CCA058V1 equivalent, this page delivers verified schematic configurations, real-world op-amp selection guidance, documented lab experiments, and supported device-level parameters including offset voltage (5 μV), GBP (20–50 MHz), supply range (±2.5 V to ±15 V or 2.7–36 V single-supply), and output drive capability (60 mA typical).

Technical Context

The kit integrates two physical boards: STEVAL-CCA058A1 main board with solderable passive networks and header-based interconnects for follower/inverter/filter/current-sense/photodiode transimpedance topologies; and STEVAL-CCA058B1 adapter board hosting eight SOT-23-5 and SO-8 op-amps/comparators on DIP footprints for plug-and-play substitution.

Each op-amp position supports independent biasing (dual ±VCC or single VCC/GND), configurable gain via external resistors/capacitors, and direct probing points for oscilloscope/multimeter validation - enabling side-by-side comparison of rail-to-rail vs. general-purpose, nanopower vs. high-speed, and zero-drift vs. standard architectures under identical test conditions.

Key Specifications

Availability

STEVAL-CCA058V1 is available at Aetrix Electronics and suitable for academic electronics laboratories, analog engineering onboarding programs, distributor technical workshops, and rapid prototyping of low-frequency op-amp circuits requiring stable component supply and documented experiment reproducibility.

Supply support for STEVAL-CCA058V1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, analog ICs, power management devices, and sensors for industrial, automotive, and consumer applications.

This kit belongs to ST's STEVAL (ST Evaluation) series - purpose-built to accelerate analog design learning, reduce time-to-prototype for op-amp applications, and bridge theoretical knowledge with hands-on circuit validation using production-grade components.

FAQ

What op-amps and comparators are pre-mounted on the STEVAL-CCA058V1 adapter board?

The STEVAL-CCA058B1 adapter board includes TS921IDT, TSC210ICT, TSU101ILT, TSV631ILT, TSV7721ILT, TSV791ILT, TSV991ILT, TSZ121ILT, and UA741CDT op-amps, plus TS881ILT, TSX3702IST, and TSX393IST comparators - all mounted on DIP adaptors for easy swapping and comparative testing without soldering.

Does the kit support both single-supply and split-supply operation?

Yes - the STEVAL-CCA058A1 main board provides dedicated VCC+, VCC−, and GND terminals with decoupling capacitors (10 µF + 100 pF per rail), allowing flexible configuration for single-supply (2.7–36 V) or dual-supply (±2.5 V to ±15 V) operation across all mounted devices.

Can I replace the pre-installed op-amps with other parts not listed in the BOM?

Yes - all op-amp positions use standard 8-pin DIP footprints (SO-8 and SOT-23-5 devices are mounted on DIP adapters), enabling manual replacement with compatible packages. Users must verify supply voltage, input/output swing, and stability with external compensation when substituting devices.

Where can I access guided lab experiments and schematics for this kit?

Guided experiments, full schematic diagrams (STEVAL-CCA058A1 and STEVAL-CCA058B1), bill of materials, and setup instructions are published in Data Brief DB4654 (Rev 2, August 2023), freely available at www.st.com - no login or registration required.