STMicroelectronics STM3210C-SK/IAR

Overview

STM3210C-SK/IAR from STMicroelectronics is an IAR Embedded Workbench®-based starter kit for STM32F103C8T6 ARM Cortex-M3 microcontrollers, featuring a full-featured KickStart development board, J-Link USB/JTAG in-circuit debugger/programmer, and EWARM KickStart edition (32 KB code limit), used for rapid prototyping of motor control and industrial sensor interface applications.

For engineers reviewing the STM3210C-SK/IAR datasheet, STM3210C-SK/IAR pinout, STM3210C-SK/IAR application, or STM3210C-SK/IAR equivalent, this kit delivers validated hardware-software integration for STM32F103-based firmware development, Flash programming, real-time debugging, and peripheral evaluation including USART, SPI, I²C, CAN, and ADC.

Technical Context

The STM3210C-SK/IAR provides a complete out-of-box environment for evaluating the STM32F103C8T6 - a 72 MHz Cortex-M3 MCU with 64 KB Flash, 20 KB SRAM, and integrated peripherals including two USARTs, two SPIs, two I²Cs, one CAN 2.0B controller, and 12-bit ADC with 16 channels.

It integrates the IAR J-Link debugger (USB 2.0 interface, 20-pin JTAG/SWD) and supports C-SPY real-time debugging, flash download via built-in loader, and VisualSTATE® state-machine code generation (20-state version), enabling deterministic embedded application development without external toolchain setup.

Key Specifications

Availability

STM3210C-SK/IAR is available at Aetrix Electronics and suitable for industrial motor control, sensor node prototyping, and CAN-based gateway development requiring stable component supply and validated toolchain integration.

Supply support for STM3210C-SK/IAR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, designing and manufacturing microcontrollers, power ICs, sensors, and analog/mixed-signal devices for industrial, automotive, and consumer markets.

This kit belongs to ST's STM32 KickStart series - purpose-built to accelerate evaluation and firmware development for entry-level STM32F1x MCUs using industry-standard IAR tools and plug-and-play hardware.

FAQ

Does STM3210C-SK/IAR support SWD debugging?

Yes. The included IAR J-Link debugger supports both JTAG and Serial Wire Debug (SWD) protocols. The board connects to the STM32F103C8T6 via a standard 20-pin ARM JTAG/SWD header, and SWD mode is enabled by default in C-SPY for faster debug sessions and reduced pin count.

What is the maximum code size supported by the included IAR EWARM license?

The STM3210C-SK/IAR includes the IAR EWARM KickStart edition, which permits compilation of applications up to 32 KB of object code. This covers most sensor fusion, motor control, and communication gateway firmware for the STM32F103C8T6 without requiring a commercial license upgrade.

Can the board program external STM32F103 devices beyond the on-board MCU?

Yes. The J-Link debugger and its 20-pin JTAG/SWD interface are fully reconfigurable. Using the board's JTAG header and IAR C-SPY, users can program and debug external STM32F103-based targets - including custom PCBs - without modifying the starter kit hardware.

Is the LCD display included on the STM3210C-SK/IAR board?

No. Unlike earlier STR91X-SK/IAR and STR7-SK/IAR kits, the STM3210C-SK/IAR does not include an LCD display. Its peripheral set focuses on core connectivity (USART, SPI, I²C, CAN) and analog interfaces (potentiometer + ADC), with two user LEDs and three push buttons for basic I/O validation.