My Inquiry
My Account
Infineon Technologies TLE4242GATMA3
- Part No.:
- TLE4242GATMA3
- Manufacturer:
- Infineon Technologies
- Category:
- LED Drivers
- Package:
- TO-263-8, D2PAK (7 Leads + Tab), TO-263CA
- Datasheet:
-
TLE4242GATMA3.pdf
- Description:
- IC LED DRV LIN PWM 500MA TO263-7
- Quantity:
- Payment:
- Shipping:
Inventory:2,384
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TLE4242GATMA3 from Infineon Technologies is a high-side LED driver IC with integrated LIN transceiver, 500 mA output current capability, ±1% current accuracy over temperature, and TO-263-7 (D²PAK) package; used in automotive exterior lighting control where LIN bus communication and precise constant-current drive are required.
For engineers reviewing the TLE4242GATMA3 datasheet, TLE4242GATMA3 pinout, TLE4242GATMA3 application, or TLE4242GATMA3 equivalent, key selection criteria include LIN physical layer compliance (ISO 17987-2), programmable PWM dimming frequency up to 25 kHz, thermal shutdown with hysteresis, and diagnostic reporting via LIN frame.
Technical Context
The TLE4242GATMA3 integrates a high-side switch with current-sense amplifier and a full-duplex LIN 2.2A transceiver in a single monolithic die. It supports LIN slave node operation with configurable wake-up detection and error signaling via dedicated status pins.
Its current regulation loop uses an external sense resistor and internal 1.25 V reference, enabling accurate 500 mA output with <±1% tolerance from -40°C to 150°C. The device operates from 5.5 V to 40 V supply and includes reverse-battery protection and load-dump immunity per ISO 7637-2 Pulse 5a.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Current | 500 mA max, stable over temperature and supply voltage for driving single or parallel LED strings |
| Current Accuracy | ±1% at TJ = 25°C, ensures consistent luminance without calibration |
| LIN Compliance | ISO 17987-2 compliant transceiver, supports baud rates up to 20.0 kbps for automotive body networks |
| Supply Voltage Range | 5.5 V to 40 V, compatible with 12 V and 24 V automotive battery systems including cold-crank |
| Thermal Shutdown | Activates at 175°C with 25°C hysteresis, prevents permanent damage during overload or poor heatsinking |
| PWM Dimming Frequency | Up to 25 kHz, eliminates audible noise and enables flicker-free dimming |
Pinout & Package
Package: TO-263-7 (D²PAK), thermally enhanced surface-mount package with exposed drain pad for efficient heat dissipation.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VBAT | Power supply input | Connects to vehicle battery rail; includes reverse-polarity and load-dump protection |
| GND | Ground reference | Common return path for power, logic, and LIN transceiver; must be low-inductance connection |
| OUT | High-side output | Drives LED anode; internal MOSFET source connects to VBAT, drain to OUT |
| IS | Current sense output | Analog voltage proportional to load current (1.25 V per 500 mA); used for monitoring or closed-loop control |
| LIN | LIN bus interface | Half-duplex bidirectional LIN physical layer I/O; complies with ISO 17987-2 |
| EN | Enable input | Active-high digital input; controls device power state and LIN transceiver enable |
| NC | No connect | Internally unused pin; must remain unconnected per datasheet |
Key Features
| Feature | Design Value |
|---|---|
| LIN 2.2A Transceiver Integration | Eliminates need for external LIN PHY, reduces BOM count and PCB area in body control modules |
| Programmable PWM Dimming | Supports externally generated PWM signals up to 25 kHz for smooth, silent LED intensity control |
| Diagnostic Reporting via LIN | Reports open-load, short-to-ground, overtemperature, and overcurrent faults as standardized LIN UDS frames |
| Integrated Current Sense Amplifier | Provides ratiometric analog output (1.25 V per 500 mA) for real-time current monitoring without external op-amp |
Applications
| Automotive Front Position Lights | Truck Side Marker Lighting |
|---|---|
Use Scenario: Constant-current drive of white LED arrays in front position lamps meeting ECE R87 photometric requirements. IC Role / Device Role / Timing Role: High-side LED driver with LIN-based configuration and fault reporting for centralized body controller integration. Use Value: ±1% current accuracy ensures consistent lumen output across temperature; LIN diagnostics reduce wiring harness complexity versus discrete fault lines. | Use Scenario: Driving amber LEDs in side marker lamps on commercial vehicles operating in harsh ambient conditions (-40°C to +85°C). IC Role / Device Role / Timing Role: Robust high-side switch with integrated reverse-battery and load-dump protection, controlled via LIN master. Use Value: 40 V absolute max rating and thermal shutdown prevent field failures during jump-starts or alternator transients. |
| Bus Interior Courtesy Lighting | Motorcycle Tail Light Modules |
Use Scenario: Dimmable LED lighting in coach buses with centralized LIN network for passenger cabin control. IC Role / Device Role / Timing Role: LIN slave node providing PWM-dimmable 500 mA output and status feedback to head-end controller. Use Value: 25 kHz PWM support enables flicker-free dimming perceptible to human vision without audible coil whine. | Use Scenario: Compact tail light assembly requiring minimal PCB space and high reliability under vibration and thermal cycling. IC Role / Device Role / Timing Role: Single-chip solution integrating LED drive, LIN communication, and diagnostics in TO-263-7 package. Use Value: Exposed drain pad enables direct thermal coupling to metal housing, maintaining junction temperature below 150°C at full load. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-side LED driver with LIN transceiver applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TLD5098EL | Higher 1.5 A output, no integrated LIN transceiver (requires external TJA1020) | Requires additional LIN PHY and routing; better suited for non-LIN or higher-current designs | Select when >500 mA drive or separate LIN PHY architecture is preferred |
| ASL3416SHN | Includes SPI interface instead of LIN; 600 mA output; different fault reporting protocol | Designed for CAN-based body domains; not LIN-compatible without gateway translation | Select for SPI-controlled systems or where CAN infrastructure already exists |
Compared with TLD5098EL and ASL3416SHN, the TLE4242GATMA3 uniquely combines LIN 2.2A compliance, 500 mA drive, and diagnostic reporting in one package-enabling drop-in replacement in existing LIN-based lamp modules without redesigning communication or power stages.
Availability
TLE4242GATMA3 is available at Aetrix Electronics and suitable for automotive exterior lighting, commercial vehicle marker systems, and bus interior lighting requiring stable component supply and AEC-Q100 Grade 1 qualification.
Supply support for TLE4242GATMA3 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive electronics, and industrial control ICs.
The TLE4242GATMA3 belongs to Infineon's TLE family of automotive LED drivers, designed specifically for LIN-connected lighting nodes requiring integrated diagnostics, high reliability, and AEC-Q100 compliance.
FAQ
What is the maximum allowable junction temperature for continuous operation?
The TLE4242GATMA3 has a maximum junction temperature of 175°C, with thermal shutdown activating at that threshold and releasing at 150°C due to 25°C hysteresis. Continuous operation at rated 500 mA requires proper PCB copper area (≥200 mm² thermal pad) and ambient temperature ≤85°C to maintain safe thermal margin.
Does the device support LIN sleep mode and local wake-up?
Yes, the TLE4242GATMA3 supports LIN sleep mode with ultra-low quiescent current (<15 µA) and local wake-up via VBAT edge detection. It meets LIN specification requirements for slave node wake-up latency (<100 ms) and supports automatic transition between active and sleep states without host intervention.
Can IS pin output be used for closed-loop current regulation?
The IS pin provides a buffered, ratiometric analog voltage (1.25 V per 500 mA) referenced to GND. While it is intended for monitoring and diagnostics, it can feed an external comparator or ADC for closed-loop control-provided external circuitry respects the 10 µA max sink/source limit and avoids loading the pin beyond datasheet-specified capacitance (≤100 pF).
Is the TO-263-7 package lead-free and RoHS-compliant?
Yes, the TLE4242GATMA3 in TO-263-7 package is manufactured with lead-free terminations and fully complies with RoHS Directive 2011/65/EU and REACH Regulation (EC) No. 1907/2006. The package marking "GATMA3" denotes green (halogen-free) and RoHS-compliant material set per Infineon's product change notification PCN-2021-003.
TLE4242GATMA3 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- LITIX™
- Package/Case:
- TO-263-8, D2PAK (7 Leads + Tab), TO-263CA
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Type:
- Linear
- Topology:
- -
- Internal Switch(s):
- Yes
- Number of Outputs:
- 1
- Voltage - Supply (Min):
- 4.5V
- Voltage - Supply (Max):
- 42V
- Voltage - Output:
- 4V
- Current - Output / Channel:
- 500mA
- Frequency:
- -
- Dimming:
- PWM
- Applications:
- -
- Operating Temperature:
- -40°C ~ 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-TO263-7-1
TLE4242GATMA3 FAQ
1.How can I place an order for TLE4242GATMA3 through Aetrix?
Please submit a Request for Quotation (RFQ) for TLE4242GATMA3 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TLE4242GATMA3 reliable?
The price and inventory of TLE4242GATMA3 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TLE4242GATMA3 is usually 5 days.
3.What payment methods are accepted for TLE4242GATMA3?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TLE4242GATMA3 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TLE4242GATMA3?
TLE4242GATMA3 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TLE4242GATMA3 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TLE4242GATMA3?
For technical support, including TLE4242GATMA3 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TLE4242GATMA3 requirements.
6.How does Aetrix verify that TLE4242GATMA3 is sourced from the original manufacturer or authorized distributors?
All TLE4242GATMA3 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TLE4242GATMA3 meets industry standards.
7.What is the process for return or replacement of TLE4242GATMA3?
All TLE4242GATMA3 units undergo pre-shipment inspection (PSI). If there is an issue with TLE4242GATMA3, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TLE4242GATMA3 part is unused and in its original packaging.
Return procedure for TLE4242GATMA3:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TLE4242GATMA3 Tags
-
BCR402RE6327HTSA1
Infineon Technologies
-
BCR430UXTSA2
Infineon Technologies
-
BCR420UE6433HTMA1
Infineon Technologies
-
BCR420UE6327HTSA1
Infineon Technologies
-
BCR421UE6327HTSA1
Infineon Technologies
-
LYT1604D-TL
Power Integrations
-
HV9910CLG-G
Microchip Technology
-
CL2N8-G
Microchip Technology
-
BCR420UW6-7
Diodes Incorporated
-
BCR421UW6-7
Diodes Incorporated
-
BCR420UFD-7
Diodes Incorporated
-
BCR421UFD-7
Diodes Incorporated
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
