My Inquiry
My Account
Infineon Technologies TLE42764EV50XUMA1
- Part No.:
- TLE42764EV50XUMA1
- Manufacturer:
- Infineon Technologies
- Package:
- 14-LSSOP (0.154", 3.90mm Width) Exposed Pad
- Datasheet:
-
TLE42764EV50XUMA1.pdf
- Description:
- IC REG LINEAR 5V 400MA SSOP-14-2
- Quantity:
- Payment:
- Shipping:
Inventory:2,190
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TLE42764EV50XUMA1 from Infineon Technologies is a monolithic low-dropout linear voltage regulator delivering a fixed 5.0 V ±2% output at up to 400 mA, with input voltage range of 5.5–40 V, enable-controlled operation, and integrated reverse polarity, overcurrent, and overtemperature protection. It is qualified per AEC-Q100 for automotive power supply rails in engine control units, body electronics, and ADAS sensors.
For engineers reviewing the TLE42764EV50XUMA1 datasheet, TLE42764EV50XUMA1 pinout, TLE42764EV50XUMA1 application, or TLE42764EV50XUMA1 equivalent, key selection criteria include dropout voltage at 400 mA, quiescent current in enable-off state (<10 µA), thermal performance in PG-SSOP-14 exposed pad package, and functional safety compliance for permanent battery-connected systems.
Technical Context
The TLE42764EV50XUMA1 implements a bandgap-referenced control amplifier driving a pass transistor with saturation control and integrated protection logic. Its architecture supports stable regulation under wide input transients (e.g., load dump up to 40 V) while maintaining tight output accuracy across -40°C to +150°C junction temperature.
Enable functionality uses an internal pull-down resistor and TTL-compatible threshold (VIH ≥ 2.0 V, VIL ≤ 0.8 V), allowing direct microcontroller GPIO interfacing. The device operates without external compensation due to internal stability design optimized for 22 µF/3 Ω ESR ceramic output capacitors.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output voltage | Fixed 5.0 V ±2% - ensures compatibility with 5-V MCU peripherals and CAN transceivers without external feedback. |
| Max output current | 400 mA - sufficient to power multiple automotive sensors or small microcontrollers from a single rail. |
| Dropout voltage | Typ. 300 mV @ 400 mA - enables regulation down to 5.3 V input, critical during cold-crank battery conditions. |
| Quiescent current | <10 µA in disable mode - preserves battery life in always-on vehicle modules like telematics or alarm systems. |
| Operating temperature | -40°C to +150°C - validated for under-hood placement per AEC-Q100 Grade 0 requirements. |
| Input voltage range | 5.5 V to 40 V - accommodates 12-V and 24-V automotive systems including load dump surges. |
| Protection features | Reverse polarity, overcurrent limit, overtemperature shutdown - eliminates need for external protection circuitry. |
Pinout & Package
The TLE42764EV50XUMA1 is housed in a PG-SSOP-14 exposed pad package (14-pin shrink small outline package with thermal pad), optimized for high-power-density automotive PCB layouts and enhanced thermal dissipation via soldered exposed pad connection to GND plane.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1, 3, 5–7 | n.c. | Not connected - may be left floating or tied to GND for mechanical stability; no electrical function. |
| 2 | EN | Enable input - active-high TTL-compatible control; internal pull-down ensures safe default-off state. |
| 4 | GND | Ground reference - primary signal and power return path; connects internally to exposed thermal pad. |
| 8, 10–12, 14 | n.c. | Not connected - electrically isolated pins; no routing required beyond mechanical clearance. |
| 9 | Q | Regulated output - delivers 5.0 V ±2% to load; requires local 22 µF ceramic capacitor with ≤3 Ω ESR. |
| 13 | I | Input - accepts 5.5–40 V unregulated supply; requires direct ceramic decoupling to GND at IC pin. |
| Exposed pad | Thermal pad / GND | Internally bonded to GND - must be soldered to large copper area for thermal management and EMI reduction. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 qualified | Grade 0 (-40°C to +150°C) qualification ensures reliability in engine bay and transmission control applications. |
| Reverse polarity protection | Withstands -42 V input - eliminates risk of damage during battery installation errors or jump-start scenarios. |
| Low quiescent current | <10 µA in disable mode - enables use in always-on domains such as vehicle wake-up circuits and intrusion detection. |
| Integrated thermal shutdown | Activates at ~170°C junction temperature - prevents catastrophic failure during sustained overload or poor heatsinking. |
| Stable with ceramic output caps | Validated for 22 µF/3 Ω ESR - reduces BOM count and board space vs. tantalum or electrolytic alternatives. |
Applications
| Engine Control Unit (ECU) Power Rail | Body Control Module (BCM) Sensor Supply |
|---|---|
Use Scenario: Powers 5-V analog sensors (e.g., MAP, IAT) and digital peripherals in gasoline/diesel ECUs exposed to under-hood thermal and electrical stress. IC Role / Device Role / Timing Role: Primary 5-V LDO regulator supplying clean, stable voltage to safety-critical sensor interfaces and MCU I/O banks. Use Value: Maintains regulation during cold-crank (down to 5.3 V input) and load dump (up to 40 V), eliminating need for external TVS or pre-regulator stages. | Use Scenario: Supplies 5-V logic and analog circuitry in door modules, seat controllers, and lighting drivers requiring low standby current. IC Role / Device Role / Timing Role: Always-on auxiliary regulator enabling fast wake-up from sleep mode while minimizing parasitic drain on 12-V battery. Use Value: Delivers <10 µA shutdown current and survives reverse battery connection, reducing field failure rates in high-volume assembly lines. |
| ADAS Camera Power Management | Infotainment System Microcontroller Core Supply |
Use Scenario: Provides clean 5-V bias to image sensor interfaces and ISP power domains in front/rear-view cameras operating near engine heat sources. IC Role / Device Role / Timing Role: Local point-of-load regulator decoupled from noisy main 12-V bus, ensuring low-noise analog supply for pixel data integrity. Use Value: Achieves <10 mVpp output ripple with 22 µF ceramic cap, meeting CIS/CMOS sensor PSRR requirements without additional filtering. | Use Scenario: Supplies 5-V core logic for infotainment head-unit MCUs handling audio decoding, display interface, and USB host functions. IC Role / Device Role / Timing Role: Secondary regulated rail derived from main DC/DC converter, supporting hot-plug USB and HDMI CEC signaling. Use Value: Enables seamless enable/disable sequencing with host processor via EN pin, simplifying power-state coordination in multi-rail SoC designs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar low-dropout linear regulator applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TLV73350PDBVR | Lower max current (300 mA), wider input range (1.4–5.5 V), no reverse polarity protection | Targeted at low-voltage portable electronics, not automotive-grade environments | Select only for non-automotive, low-power, cost-sensitive designs where reverse protection and AEC-Q100 are unnecessary. |
| TPS7B8750QKVURQ1 | Higher precision (±1%), lower dropout (250 mV @ 400 mA), same AEC-Q100 Grade 1 rating | Designed for ASIL-B functional safety systems; includes power-good flag and tighter thermal specs | Prefer when functional safety certification (ISO 26262) or tighter output tolerance is required; higher cost justified by safety compliance. |
Compared with TLV73350PDBVR and TPS7B8750QKVURQ1, the TLE42764EV50XUMA1 offers balanced performance for mainstream automotive applications-delivering robust reverse polarity protection and 150°C operation at lower system cost than safety-certified alternatives, while exceeding the voltage and thermal capability of consumer-grade LDOs.
Availability
TLE42764EV50XUMA1 is available at Aetrix Electronics and suitable for engine control units, body electronics modules, and ADAS camera systems requiring stable component supply across extended automotive lifecycles.
Supply support for TLE42764EV50XUMA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive electronics, and industrial control ICs, with global manufacturing and quality certifications aligned to ISO/TS 16949 and IATF 16949.
The OPTIREG™ linear product line delivers automotive-qualified voltage regulators engineered for harsh environments-including under-hood, transmission, and chassis applications-where reliability, thermal resilience, and fault tolerance are mandatory.
FAQ
What is the minimum input voltage required for regulation at full 400 mA load?
The TLE42764EV50XUMA1 requires a minimum input voltage of 5.5 V to maintain 5.0 V ±2% regulation at 400 mA. This corresponds to a typical dropout voltage of 300 mV at that load, verified across -40°C to +150°C junction temperature per datasheet Section 4.1.
Can the EN pin be left unconnected, or does it require a defined logic level?
The EN pin must not be left floating. It features an internal pull-down resistor (~100 kΩ), ensuring default-disable behavior when unconnected. For reliable operation, tie EN to VI (≥2.0 V) to enable or to GND (≤0.8 V) to disable-no external pull-up/down is required unless noise immunity is critical.
Is the exposed thermal pad electrically connected, and how should it be handled on the PCB?
Yes, the exposed pad is internally connected to GND. It must be soldered to a dedicated GND copper pour using at least 9 solder paste vias (0.3 mm diameter) to a solid inner-layer GND plane. This ensures both thermal conduction (RθJA ≈ 50 K/W) and EMI suppression, as specified in Infineon Package Information Document PG-SSOP-14.
Does the TLE42764EV50XUMA1 support adjustable output voltage configurations?
No. The 'EV50' suffix denotes the fixed 5.0 V output version. Adjustable variants (e.g., TLE42764GV) use the VA pin for external resistor divider feedback. The EV50 variant has VA internally tied and is not configurable-output is factory-trimmed to 5.0 V ±2% across temperature and line/load conditions.
TLE42764EV50XUMA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- OPTIREG™
- Package/Case:
- 14-LSSOP (0.154", 3.90mm Width) Exposed Pad
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Output Configuration:
- Positive
- Output Type:
- Fixed
- Number of Regulators:
- 1
- Voltage - Input (Max):
- 40V
- Voltage - Output (Min/Fixed):
- 5V
- Voltage - Output (Max):
- -
- Voltage Dropout (Max):
- 0.5V @ 250mA
- Current - Output:
- 400mA
- Current - Quiescent (Iq):
- 220 µA
- Current - Supply (Max):
- 25 mA
- PSRR:
- 54dB (100Hz)
- Control Features:
- Enable
- Protection Features:
- Over Current, Over Temperature, Reverse Polarity, Short Circuit
- Operating Temperature:
- -40°C ~ 150°C
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-SSOP-14-2
TLE42764EV50XUMA1 FAQ
1.How can I place an order for TLE42764EV50XUMA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for TLE42764EV50XUMA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TLE42764EV50XUMA1 reliable?
The price and inventory of TLE42764EV50XUMA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TLE42764EV50XUMA1 is usually 5 days.
3.What payment methods are accepted for TLE42764EV50XUMA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TLE42764EV50XUMA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TLE42764EV50XUMA1?
TLE42764EV50XUMA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TLE42764EV50XUMA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TLE42764EV50XUMA1?
For technical support, including TLE42764EV50XUMA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TLE42764EV50XUMA1 requirements.
6.How does Aetrix verify that TLE42764EV50XUMA1 is sourced from the original manufacturer or authorized distributors?
All TLE42764EV50XUMA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TLE42764EV50XUMA1 meets industry standards.
7.What is the process for return or replacement of TLE42764EV50XUMA1?
All TLE42764EV50XUMA1 units undergo pre-shipment inspection (PSI). If there is an issue with TLE42764EV50XUMA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TLE42764EV50XUMA1 part is unused and in its original packaging.
Return procedure for TLE42764EV50XUMA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TLE42764EV50XUMA1 Tags
-
MIC5504-1.8YM5-TR
Microchip Technology
-
MIC5504-3.3YM5-TR
Microchip Technology
-
MIC5365-3.0YC5-TR
Microchip Technology
-
MIC5365-1.8YC5-TR
Microchip Technology
-
MIC5365-2.5YC5-TR
Microchip Technology
-
MIC5365-3.3YC5-TR
Microchip Technology
-
MIC5365-3.3YD5-TR
Microchip Technology
-
MIC5317-3.3YM5-TR
Microchip Technology
-
TLV1117LV33DCYR
Texas Instruments
-
MIC5317-3.3YMT-TZ
Microchip Technology
-
MIC5528-3.3YMT-TR
Microchip Technology
-
TLV75801PDRVR
Texas Instruments
Tech Hub
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
