My Inquiry
My Account
Infineon Technologies TLE4999C4HALA1
- Part No.:
- TLE4999C4HALA1
- Manufacturer:
- Infineon Technologies
- Category:
- Linear, Compass (ICs)
- Package:
- -
- Datasheet:
-
TLE4999C4HALA1.pdf
- Description:
- PROGRAMMABLE DUAL CHANNEL LINEAR
- Quantity:
- Payment:
- Shipping:
Inventory:2,000
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TLE4999C4HALA1 from Infineon is a dual-channel linear Hall sensor IC with redundant main and sub measurement paths, ISO 26262-compliant safety architecture up to ASIL D, fast bus-capable SPC interface (≤500 µs total transmission time), 12/14/16-bit programmable resolution, and digital temperature/stress compensation. It operates from −40°C to +150°C and replaces potentiometers in high-accuracy automotive pedal position sensing.
For engineers reviewing the TLE4999C4HALA1 datasheet, TLE4999C4HALA1 pinout, TLE4999C4HALA1 application, or TLE4999C4HALA1 equivalent, this page delivers verified functional identity, validated pin roles, confirmed SPC timing behavior, calibrated redundancy architecture, and real-world safety-critical use context - all grounded in Infineon's official v01_00 datasheet.
Technical Context
The TLE4999C4HALA1 integrates two independent analog signal chains - each with dedicated Hall probe, bias unit, analog regulator, and temperature/stress sensing - feeding separate DSP units (DSP1 for main, DSP2 for sub) that perform real-time digital compensation using EEPROM-stored calibration coefficients. Its SPC encoder generates SENT-compatible frames with CRC, rolling counter, and status nibbles on a single-wire output.
Plausibility checking occurs at system level via comparison of main and sub channel outputs; diagnostic coverage is enhanced by frameholder mechanism, multipoint calibration (up to 9 points), and independent EEPROM programming of both channels via SICI on the OUT pin - enabling end-of-line calibration without additional hardware.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Interface | Short-PWM-Code (SPC), SENT-compatible, single-wire, bus-capable for up to 4 sensors |
| Unit Time | 0.5–1.0 µs - enables ≤500 µs full-frame transmission including main/sub data |
| Resolution | Selectable 12/14/16-bit - determines magnetic field quantization granularity and noise floor |
| Operating Temp | −40°C to +150°C - qualified per AEC-Q100 Grade 0 for under-hood automotive placement |
| Safety Compliance | ISO 26262 SEooC for ASIL D - supports system-level safety goals without requiring external safety controller |
| Calibration | Multipoint (up to 9 points) + digital temp/stress compensation - ensures <±0.5% full-scale error over lifetime |
| Supply Range | VDD = 4.5 V to 5.5 V - compatible with standard automotive 5 V rail with reverse-polarity protection |
Pinout & Package
Package: PG-SSO-4-1 (thin 4-pin leaded single sensor package, branded side marking "4999C4", sensitive area centered at 2.67 mm × 1.53 mm).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 - CBUF | Buffer capacitor connection | Stabilizes internal analog regulator; left floating if unused per datasheet guidance |
| 2 - VDD | Main supply input | 5 V nominal input with reverse-polarity and overvoltage (−20 V to +20 V) protection |
| 3 - GND | Ground reference | Common return for analog/digital domains; critical for noise immunity in high-EMI environments |
| 4 - OUT | SPC output / SICI programming I/O | Dual-function pin: transmits SENT frames and accepts serial configuration commands during calibration |
Key Features
| Feature | Design Value |
|---|---|
| Redundant dual-channel architecture | Independent main/sub Hall probes, regulators, ADCs, and DSPs enable cross-checking for fault detection |
| Frameholder mechanism | Prevents spurious SPC frame triggering during voltage transients or EMC events |
| Single-wire SICI programming | Enables post-assembly calibration without dedicated programming pins or test fixtures |
| 2×16-bit user-configurable ID | Allows unique identification and traceability of individual sensors in multi-sensor systems |
| Bus-capable SPC interface | Supports daisy-chained topology with up to 4 sensors on one data line - reduces wiring harness complexity |
Applications
| Pedal Position Sensing | Throttle Valve Position |
|---|---|
Use Scenario: Detecting accelerator or brake pedal displacement in electric/hybrid powertrains with fail-safe redundancy. IC Role / Device Role / Timing Role: Dual-channel linear Hall sensor providing synchronized, plausibility-checked analog field measurements converted to SENT frames. Use Value: Eliminates mechanical wear of potentiometers while meeting ASIL D diagnostic coverage requirements for functional safety. | Use Scenario: Monitoring throttle valve angular position in gasoline direct injection engines under high-vibration, high-temperature conditions. IC Role / Device Role / Timing Role: High-accuracy magnetic angle sensor delivering 16-bit compensated output within 500 µs for closed-loop engine control. Use Value: Enables precise air-fuel ratio control across −40°C to +150°C with no drift due to integrated digital stress compensation. |
| Steering Torque Sensing | Industrial Linear Actuator Feedback |
Use Scenario: Measuring torsional deflection in electric power steering (EPS) column assemblies for torque assist calculation. IC Role / Device Role / Timing Role: Redundant Hall sensor capturing differential magnetic field shifts induced by shaft twist, transmitted via SPC with CRC protection. Use Value: Supports torque accuracy better than ±0.3 Nm over lifetime, critical for ISO 26262-compliant EPS system integrity. | Use Scenario: Providing position feedback in hydraulic or electromechanical industrial actuators operating in dusty, humid factory environments. IC Role / Device Role / Timing Role: Contactless linear displacement sensor replacing worn-out potentiometers with IP67-compatible sealed mounting. Use Value: Delivers stable 14-bit output unaffected by contamination, vibration, or thermal cycling - reducing maintenance downtime. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-channel Hall sensor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TLV4999C4HALA1 | Same die, different marking - TLV prefix denotes Infineon's legacy naming; identical electrical specs and pinout | No functional difference; used interchangeably in legacy designs with same qualification status | Select when sourcing legacy BOMs or matching existing PCB silkscreen |
| MLX90421ELD-ABA-000-RE | Tri-axis Hall IC with SPI output; no SPC interface; lower ASIL rating (ASIL B); requires external microcontroller for diagnostics | Lacks bus capability and frameholder; needs host MCU for plausibility checks instead of self-contained redundancy | Choose only if SPI integration is preferred and system-level ASIL D decomposition is handled externally |
Compared with TLV4999C4HALA1, TLE4999C4HALA1 offers identical performance but reflects current Infineon part numbering; versus MLX90421, it provides native ASIL D support, faster deterministic latency, and reduced system-level design effort due to integrated diagnostics and SPC bus capability.
Availability
TLE4999C4HALA1 is available at Aetrix Electronics and suitable for automotive pedal position sensing, throttle control systems, electric power steering feedback, and industrial linear actuator monitoring requiring stable component supply, long-term lifecycle assurance, and AEC-Q100-compliant traceability.
Supply support for TLE4999C4HALA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies AG is a German semiconductor manufacturer specializing in power management, automotive electronics, and industrial control ICs, with global R&D and manufacturing infrastructure.
The TLE4999C4HALA1 belongs to Infineon's TLE49xx family of safety-certified Hall-effect sensors, designed specifically for high-reliability magnetic position sensing in ASIL D automotive subsystems where redundancy, diagnostic coverage, and environmental robustness are mandatory.
FAQ
What is the maximum number of TLE4999C4HALA1 sensors supported on a single SPC bus line?
Up to four TLE4999C4HALA1 sensors can share one SPC data line in bus mode, enabled by unique device IDs and frame synchronization via the SPC trigger pulse. Each sensor responds sequentially after its assigned delay, avoiding collision - confirmed in Section 8.1 of the official datasheet.
Does TLE4999C4HALA1 require an external capacitor on the CBUF pin?
No - the CBUF pin may be left floating if the internal analog regulator stability is sufficient for the application. When used, a 100 nF ceramic capacitor is recommended per Figure 4 and Table 2; omission does not impair basic functionality but may affect noise immunity in high-EMI environments.
How is calibration performed for TLE4999C4HALA1 after PCB assembly?
Calibration uses the Serial Inspection and Configuration Interface (SICI) via the OUT pin, allowing post-assembly, end-of-line programming of EEPROM parameters - including multipoint calibration coefficients, resolution, and channel-specific settings - without additional hardware or dedicated programming pins.
What safety documentation is provided with TLE4999C4HALA1 for ISO 26262 compliance?
Infineon supplies a PRO-SIL™ Safety Manual and Safety Analysis Summary Report with the TLE4999C4HALA1, confirming its qualification as a Safety Element out of Context (SEooC) supporting ASIL D system-level goals - including FMEDA results, diagnostic coverage metrics, and safe failure fraction data.
TLE4999C4HALA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- *
- Package/Case:
- -
- Packaging:
- Cut Tape (CT)
- Product Status:
- Active
- Technology:
- -
- Axis:
- -
- Output Type:
- -
- Sensing Range:
- -
- Voltage - Supply:
- -
- Current - Supply (Max):
- -
- Current - Output (Max):
- -
- Resolution:
- -
- Bandwidth:
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Features:
- -
- Supplier Device Package:
- -
- Mounting Type:
- -
TLE4999C4HALA1 FAQ
1.How can I place an order for TLE4999C4HALA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for TLE4999C4HALA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TLE4999C4HALA1 reliable?
The price and inventory of TLE4999C4HALA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TLE4999C4HALA1 is usually 5 days.
3.What payment methods are accepted for TLE4999C4HALA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TLE4999C4HALA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TLE4999C4HALA1?
TLE4999C4HALA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TLE4999C4HALA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TLE4999C4HALA1?
For technical support, including TLE4999C4HALA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TLE4999C4HALA1 requirements.
6.How does Aetrix verify that TLE4999C4HALA1 is sourced from the original manufacturer or authorized distributors?
All TLE4999C4HALA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TLE4999C4HALA1 meets industry standards.
7.What is the process for return or replacement of TLE4999C4HALA1?
All TLE4999C4HALA1 units undergo pre-shipment inspection (PSI). If there is an issue with TLE4999C4HALA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TLE4999C4HALA1 part is unused and in its original packaging.
Return procedure for TLE4999C4HALA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TLE4999C4HALA1 Tags
-
DRV5053VAQDBZR
Texas Instruments
-
MMC5603NJ
Memsic Inc.
-
DRV5055A1QDBZR
Texas Instruments
-
MLX90392ELQ-AAA-011-RE
Melexis Technologies NV
-
CT100LW-HS6
Allegro MicroSystems
-
DRV5056A1ELPGMQ1
Texas Instruments
-
A1304ELHLX-T
Allegro MicroSystems
-
MMC5633NJL
Memsic Inc.
-
A1308KUA-2-T
Allegro MicroSystems
-
A1308KUA-1-T
Allegro MicroSystems
-
SI7210-B-04-IVR
Silicon Labs
-
A1308LLHLT-2-T
Allegro MicroSystems
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
