My Inquiry
My Account
Infineon Technologies TLE63893GV50XUMA1
- Part No.:
- TLE63893GV50XUMA1
- Manufacturer:
- Infineon Technologies
- Category:
- DC DC Switching Controllers
- Package:
- 14-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
TLE63893GV50XUMA1.pdf
- Description:
- IC REG CTRLR BUCK 14DSO
- Quantity:
- Payment:
- Shipping:
Inventory:1,161
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TLE63893GV50XUMA1 from Infineon Technologies is a fixed 5V step-down DC/DC controller driving an external P-channel MOSFET, supporting input voltages up to 60V, delivering up to 2.3A output current, featuring 360kHz fixed switching frequency, integrated undervoltage reset with 1V hysteresis, and AEC-Q100 qualification for automotive power supply rails.
For engineers reviewing the TLE63893GV50XUMA1 datasheet, TLE63893GV50XUMA1 pinout, TLE63893GV50XUMA1 application, or TLE63893GV50XUMA1 equivalent, key selection criteria include its 5V fixed output accuracy (±3%), 120µA light-load quiescent current, RO/SO open-drain outputs with internal 20kΩ pull-up to VOUT, SI comparator for battery sensing, and PG-DSO-14-1 package compatibility with high-temperature automotive environments.
Technical Context
The TLE63893GV50XUMA1 implements a current-mode PWM/PFM hybrid control scheme enabling 100% duty cycle operation for ultra-low dropout, eliminating minimum load requirements while maintaining regulation down to 1mA. Its internal low-battery comparator (SI input referenced to 1.25V) and undervoltage reset circuit (RO threshold ~4.65V ±150mV with 1V hysteresis) operate independently of the main regulator loop.
It drives external P-MOSFETs via GDRV with clamped gate drive supplied by BDS–VS bootstrap capacitor, supports external clock synchronization via SYNC pin, and uses FB internally tied to a precision voltage divider for fixed 5V output-removing need for external feedback resistors.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Input Voltage Range | 2.1V to 60V - supports wide automotive battery transients including cold-crank and load-dump conditions |
| Output Voltage | Fixed 5.0V ±3% - factory-trimmed internal reference eliminates external resistor network |
| Max Output Current | 2.3A - determined by external P-MOSFET and inductor selection, not IC-limited |
| Switching Frequency | 360kHz fixed - enables use of compact 47µH SMD inductors and reduces EMI filtering burden |
| Quiescent Current | 120µA at light load - extends battery runtime in always-on vehicle modules |
| Reset Threshold | 4.65V ±150mV with 1V hysteresis - ensures clean system restart after brown-out recovery |
| Operating Temperature | −40°C to +150°C junction - qualified per AEC-Q100 Grade 0 for under-hood applications |
Pinout & Package
Package: PG-DSO-14-1 (14-pin plastic dual small outline, 150 mil width, exposed thermal pad).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 SI_ENABLE | Active-high enable for SI_GND switch | Controls connection of SI_GND to GND; SO/RO undefined when low |
| 2 FB | Feedback reference input | Internally connected to 5V divider; no external components required |
| 3 VOUT | Buck output voltage sense | Supplies internal bias circuitry; must connect directly to output capacitor |
| 4 GND | Analog ground reference | Primary signal return for FB, COMP, CS, and internal regulators |
| 5 SYNC | External clock input | Overrides internal 360kHz oscillator; accepts TTL/CMOS logic-level signals |
| 6 SI_GND | Low-battery comparator ground | Switched to GND or high-Z based on SI_ENABLE state |
| 7 SI | Sense comparator input | Compares external voltage to internal 1.25V reference; used for battery monitoring |
| 8 COMP | Loop compensation node | Connects RC network to GND for stability tuning of current-mode control |
| 9 SO | Sense comparator output | Open-drain output pulled up to VOUT via 20kΩ; asserts low when SI < 1.25V |
| 10 RO | Reset output | Open-drain output pulled up to VOUT via 20kΩ; asserts low when VOUT < 4.65V |
| 11 BDS | Bootstrap driver supply | Provides clamped gate-source voltage for P-MOSFET drive; requires ceramic cap to VS |
| 12 GDRV | Gate drive output | Swings between VS and BDS levels; drives P-MOSFET gate with fast edge rates |
| 13 VS | Main supply input | Accepts 2.1–60V; requires local 220nF ceramic + bulk low-ESR tantalum capacitance |
| 14 CS | Current sense input | Monitors voltage drop across external sense resistor to limit peak inductor current |
Key Features
| Feature | Design Value |
|---|---|
| 100% Duty Cycle Operation | Enables regulation down to VIN − VOUT ≈ 0.3V, critical for cold-crank (6.5V) start-up into 5V rail |
| Integrated Undervoltage Reset | RO output provides system reset with 1V hysteresis, eliminating need for discrete supervisor IC |
| On-Chip Low-Battery Detector | SI/SO path delivers battery status flag without external comparator or reference |
| Automotive Qualified Biasing | Internal regulators and references fully functional across −40°C to +150°C junction range |
| Robust Protection Architecture | Includes overcurrent shutdown (CS), thermal foldback, and ESD protection (2kV HBM on all pins) |
Applications
| Body Control Module (BCM) | Engine Control Unit (ECU) Auxiliary Rail |
|---|---|
Use Scenario: Powering microcontroller, CAN transceivers, and sensor interfaces in vehicle body electronics. IC Role / Device Role / Timing Role: Primary 5V buck controller supplying regulated power from 12V battery with transient immunity. Use Value: 120µA quiescent current minimizes parasitic drain during vehicle sleep mode; RO reset ensures deterministic MCU boot after battery recovery. | Use Scenario: Generating stable 5V supply for non-critical ECU subsystems such as diagnostics or communication gateways. IC Role / Device Role / Timing Role: Secondary regulated rail decoupled from main engine controller supply. Use Value: 60V input rating withstands ISO 7637-2 pulse 5a (load dump); SI comparator monitors backup battery health. |
| Advanced Driver Assistance Systems (ADAS) Camera Module | Electric Power Steering (EPS) Sensor Interface |
Use Scenario: Providing clean 5V power to image sensor, ISP, and serializer in automotive camera systems. IC Role / Device Role / Timing Role: Point-of-load regulator with low noise and fast transient response for analog imaging circuits. Use Value: Fixed 5V ±3% output ensures consistent ADC reference and PLL lock; 360kHz switching avoids interference in video band. | Use Scenario: Supplying torque and position sensor interfaces in EPS motor control units. IC Role / Device Role / Timing Role: Safety-relevant auxiliary power source with diagnostic capability via SO/RO outputs. Use Value: AEC-Q100 Grade 0 qualification and 150°C operation support placement near motor drivers; SI input enables real-time battery voltage telemetry. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar step-down DC/DC controller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TLV62569DRVR | 3.0–5.5V input only; integrated MOSFET; 2A max; no SI/RO/SO functions | Lacks battery sense, reset, and high-voltage capability - unsuitable for automotive primary rail | Select only for low-voltage consumer applications where 60V tolerance and diagnostics are unnecessary |
| LM5164QDDARQ1 | Wide-input (3–65V); integrated high-side MOSFET; 300kHz–2.2MHz sync; no SI comparator or RO hysteresis | Requires external reset IC; lacks on-chip low-battery flag; higher BOM count for same functionality | Choose when higher efficiency at light loads or programmable frequency is prioritized over integrated diagnostics |
Compared with TLV62569DRVR and LM5164QDDARQ1, the TLE63893GV50XUMA1 uniquely integrates automotive-grade reset (1V hysteresis), battery sense (SI/SO), and 60V operation in a single PG-DSO-14 package-reducing component count and validation effort for AEC-Q100-compliant 5V rails.
Availability
TLE63893GV50XUMA1 is available at Aetrix Electronics and suitable for Body Control Modules, Engine Control Units, ADAS camera modules, and Electric Power Steering sensor interfaces requiring stable component supply across automotive production lifecycles.
Supply support for TLE63893GV50XUMA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive electronics, and industrial control ICs, with global manufacturing and automotive qualification infrastructure.
The TLE6389 product line delivers highly integrated, AEC-Q100-qualified DC/DC controllers for automotive power rails-designed specifically to replace discrete supervisor + regulator combinations in harsh-environment ECUs and body electronics.
FAQ
What is the function of the SI_ENABLE pin on TLE63893GV50XUMA1?
The SI_ENABLE pin controls the switching state of the SI_GND terminal: when high, SI_GND is connected to GND with low impedance; when low, SI_GND enters high-impedance mode and SO/RO outputs become undefined. This allows safe isolation of the battery-sense circuit during system standby without affecting main regulator operation.
Can TLE63893GV50XUMA1 be used with an N-channel MOSFET instead of a P-channel?
No. The TLE63893GV50XUMA1 is designed exclusively for external P-channel MOSFETs, as its GDRV output swings between VS and BDS to provide proper gate-source voltage control. Using an N-channel device would require level-shifting circuitry and is not supported by the internal driver architecture or datasheet application guidance.
How does the RO output behave during power-up and brown-out events?
The RO output remains high-impedance until VOUT reaches ~4.5V, then transitions to active-low when VOUT drops below 4.65V (typical). With 1V hysteresis, RO stays low until VOUT rises above ~5.65V, ensuring glitch-free reset assertion and release during battery transients and slow-rising supplies.
Is external compensation required for stable operation of TLE63893GV50XUMA1?
Yes. A Type II RC compensation network must be connected between COMP and GND to stabilize the current-mode control loop. Typical values are 10kΩ in series with 1nF capacitor, but exact values depend on selected inductor, output capacitor ESR, and desired phase margin-designers must verify loop response using the COMP pin's transimpedance characteristics.
TLE63893GV50XUMA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- 14-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Output Type:
- Transistor Driver
- Function:
- Step-Down
- Output Configuration:
- Positive
- Topology:
- Buck
- Number of Outputs:
- 1
- Output Phases:
- 1
- Voltage - Supply (Vcc/Vdd):
- 5V ~ 60V
- Frequency - Switching:
- 360kHz
- Duty Cycle (Max):
- 100%
- Synchronous Rectifier:
- Yes
- Clock Sync:
- Yes
- Serial Interfaces:
- -
- Control Features:
- Current Limit, Enable, Reset
- Operating Temperature:
- -40°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-DSO-14-1
TLE63893GV50XUMA1 FAQ
1.How can I place an order for TLE63893GV50XUMA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for TLE63893GV50XUMA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TLE63893GV50XUMA1 reliable?
The price and inventory of TLE63893GV50XUMA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TLE63893GV50XUMA1 is usually 5 days.
3.What payment methods are accepted for TLE63893GV50XUMA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TLE63893GV50XUMA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TLE63893GV50XUMA1?
TLE63893GV50XUMA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TLE63893GV50XUMA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TLE63893GV50XUMA1?
For technical support, including TLE63893GV50XUMA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TLE63893GV50XUMA1 requirements.
6.How does Aetrix verify that TLE63893GV50XUMA1 is sourced from the original manufacturer or authorized distributors?
All TLE63893GV50XUMA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TLE63893GV50XUMA1 meets industry standards.
7.What is the process for return or replacement of TLE63893GV50XUMA1?
All TLE63893GV50XUMA1 units undergo pre-shipment inspection (PSI). If there is an issue with TLE63893GV50XUMA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TLE63893GV50XUMA1 part is unused and in its original packaging.
Return procedure for TLE63893GV50XUMA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TLE63893GV50XUMA1 Tags
-
UCC28C45DR
Texas Instruments
-
UCC28C40DR
Texas Instruments
-
UCC28C43DR
Texas Instruments
-
ZXSC410E6TA
Diodes Incorporated
-
LM3524DMX/NOPB
Texas Instruments
-
LM3489MMX/NOPB
Texas Instruments
-
MIC2102YML-TR
Microchip Technology
-
LM5148RGYR
Texas Instruments
-
TL598CDR
Texas Instruments
-
LM5155DSSR
Texas Instruments
-
LM25085MYX/NOPB
Texas Instruments
-
UCC2813DTR-0
Texas Instruments
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
