My Inquiry
My Account
Toshiba Semiconductor and Storage TLP5754(D4-TP4,E
- Part No.:
- TLP5754(D4-TP4,E
- Manufacturer:
- Toshiba Semiconductor and Storage
- Category:
- Isolators - Gate Drivers
- Package:
- 6-SOIC (0.295", 7.50mm Width)
- Datasheet:
-
TLP5754(D4-TP4,E.pdf
- Description:
- OPTOISO 5KV 1CH GATE DVR 6SO
- Quantity:
- Payment:
- Shipping:
Inventory:2,238
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TLP5754(D4-TP4,E from Toshiba Electronic Devices & Storage Corporation is a reinforced-insulation photocoupler with integrated high-speed photodetector and totem-pole output stage, designed for gate driving of power semiconductors in high-noise industrial inverters. It delivers ±4.0 A peak output current, 150 ns max propagation delay, ±35 kV/µs common-mode transient immunity, and operates across -40°C to +110°C with 15–30 V supply voltage.
For engineers reviewing the TLP5754(D4-TP4,E datasheet, TLP5754(D4-TP4,E pinout, TLP5754(D4-TP4,E application, or TLP5754(D4-TP4,E equivalent, this device serves as a safety-certified, rail-to-rail IGBT/MOSFET driver requiring compact SO6L packaging, high CMTI, and UVLO protection in induction cooktops, air conditioner inverters, and industrial motor drives.
Technical Context
The TLP5754(D4-TP4,E integrates an infrared LED input stage with a monolithic photo IC detector featuring internal Faraday shielding and a totem-pole buffer output. Its logic-level truth table (H/L input → H/L output) enables direct interface with microcontroller GPIOs without external level-shifting.
This variant implements the D4 option per EN IEC 60747-5-5, satisfying reinforced insulation requirements for mains-connected equipment. It requires a 1 µF ceramic bypass capacitor between VCC (Pin 6) and GND (Pin 4), and supports exponential waveform drive up to 50 kHz switching frequency with guaranteed UVLO thresholds at 12.1 V (rising) and 11.1 V (falling).
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Peak Current | ±4.0 A max - drives high-gate-charge IGBTs/MOSFETs directly without external buffers |
| Propagation Delay | tpHL/tpLH ≤ 150 ns - enables precise timing control in >50 kHz inverter PWM stages |
| CMTI | ±35 kV/µs min - maintains signal integrity during fast dV/dt transients in motor drives |
| Isolation Voltage | 5000 Vrms min - certified for reinforced insulation per UL 1577, VDE EN IEC 60747-5-5 |
| Supply Voltage Range | 15–30 V - compatible with standard industrial DC bus rails and gate driver supplies |
| Operating Temperature | -40°C to +110°C - supports under-hood and enclosed inverter environments |
| Threshold Input Current | ≤4 mA max - ensures reliable turn-on with low-power MCU outputs or opto-isolated logic |
Pinout & Package
Package: 6-pin SO6L (Toshiba package code 11-4N1A), surface-mount, creepage/clearance ≥8.0 mm, isolation thickness ≥0.4 mm, height ≤2.3 mm.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Anode | LED anode - connect in series with current-limiting resistor to MCU GPIO or logic driver |
| 2 | N.C. | No connection - must remain unconnected; not internally bonded |
| 3 | Cathode | LED cathode - return path for input LED current |
| 4 | GND | Output-side ground reference - tie to gate driver local ground and bypass capacitor negative |
| 5 | VO | Rail-to-rail output - drives gate of N-channel IGBT/MOSFET; sinks or sources up to ±4 A |
| 6 | VCC | Positive supply for output stage - connect 1 µF ceramic capacitor to Pin 4 for stability |
Key Features
| Feature | Design Value |
|---|---|
| Rail-to-rail totem-pole output | Eliminates need for external pull-up/pull-down resistors and enables full-swing gate drive |
| Integrated Faraday shield | Guarantees ±35 kV/µs CMTI - critical for noise immunity in high-dV/dt inverter legs |
| UVLO protection | Active below 12.1 V (rising) and above 11.1 V (falling) - prevents partial turn-on of power devices |
| D4-certified reinforced insulation | Meets EN IEC 60747-5-5 and EN IEC 62368-1 - qualifies for safety-critical mains-isolated applications |
| Compact SO6L footprint | 50% smaller than legacy 8-pin DIP - reduces PCB area in space-constrained inverter modules |
Applications
| Induction Cooktop Control | Air Conditioner Inverter |
|---|---|
Use Scenario: Isolating MCU PWM signals from half-bridge IGBTs driving resonant LC tank at 20–50 kHz. IC Role / Device Role / Timing Role: High-CMTI gate driver providing reinforced isolation between low-voltage control and 400 V DC bus. Use Value: Prevents false triggering during EMI-rich cooking cycles and meets IEC 60335-1 safety requirements. |
Use Scenario: Driving compressor inverter IGBTs in variable-speed HVAC systems operating at ambient up to 65°C. IC Role / Device Role / Timing Role: Temperature-stable gate driver with rail-to-rail output ensuring clean turn-on/turn-off across full thermal range. Use Value: Enables energy-efficient VSD operation while maintaining safety certification under EN 60335-2-40. |
| Industrial Motor Drive | MOSFET-Based UPS Output Stage |
Use Scenario: Gate driving of 600 V IGBTs in 3-phase VFDs handling 10–30 kW loads with fast dV/dt transients. IC Role / Device Role / Timing Role: Reinforced-isolation driver with ±35 kV/µs CMTI protecting control logic from power-stage noise. Use Value: Reduces system-level filtering complexity and improves reliability in factory automation environments. |
Use Scenario: Driving paralleled N-channel MOSFETs in high-efficiency online UPS output inverters. IC Role / Device Role / Timing Role: Low-propagation-delay (≤150 ns), high-current (±4 A) driver enabling tight dead-time control. Use Value: Minimizes shoot-through risk and conduction losses while meeting UL 1778 reinforced insulation requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-CMTI gate driver applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Silicon Labs Si827x series | Digital isolator-based gate driver; no internal LED; higher supply voltage range (up to 36 V); lower CMTI (±35 kV/µs typical, not guaranteed min) | Requires external level-shifting for 3.3 V logic inputs; lacks integrated UVLO hysteresis | Preferred when digital isolation architecture and programmable features (e.g., adjustable dead time) are required over analog simplicity |
| ON Semiconductor FOD8316 | Similar SO6 package and ±4 A output; lower CMTI (±25 kV/µs min); no D4 VDE certification; different UVLO thresholds (11.5 V/10.5 V) | Not qualified to EN IEC 60747-5-5; limited to basic insulation in non-mains-connected systems | Cost-sensitive alternative where reinforced insulation and highest CMTI are not mandatory |
Compared with Si827x and FOD8316, the TLP5754(D4-TP4,E provides guaranteed ±35 kV/µs CMTI, D4-certified reinforced insulation, and tighter UVLO hysteresis - making it uniquely suited for safety-critical, high-noise inverter designs requiring compliance with EN 62368-1 and IEC 60747-5-5.
Availability
TLP5754(D4-TP4,E is available at Aetrix Electronics and suitable for induction cooktops, air conditioner inverters, and industrial motor drives requiring stable component supply, long-term lifecycle support, and safety-standard-compliant isolation.
Supply support for TLP5754(D4-TP4,E includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Toshiba Electronic Devices & Storage Corporation is a Japanese semiconductor manufacturer specializing in power devices, logic ICs, and optoelectronics, with decades of expertise in high-reliability isolation components.
The TLP5754 series belongs to Toshiba's high-performance photocoupler product line, engineered specifically for robust gate driving in industrial inverters, home appliance motor controls, and safety-critical isolated power systems.
FAQ
What safety certifications apply to the TLP5754(D4-TP4,E?
The TLP5754(D4-TP4,E carries UL 1577 recognition (File No. E67349), cUL CSA Component Acceptance (File No. E67349), and VDE approval to EN IEC 60747-5-5 and EN IEC 62368-1 under Option D4. This confirms its qualification for reinforced insulation in mains-connected equipment. Certification documentation is available through Toshiba's official support portal and authorized distributors.
Why does the TLP5754(D4-TP4,E require a 1 µF capacitor between VCC and GND?
The TLP5754(D4-TP4,E contains a high-gain linear amplifier in its photodetector stage; without a 1 µF ceramic bypass capacitor placed within 1 cm of Pins 6 (VCC) and 4 (GND), the output may oscillate or fail to switch cleanly. This capacitor stabilizes the internal supply rail during fast output transitions and suppresses high-frequency noise coupling into the sensitive analog front-end.
Can the TLP5754(D4-TP4,E drive both IGBTs and MOSFETs?
Yes - the TLP5754(D4-TP4,E delivers ±4.0 A peak output current and rail-to-rail voltage swing, enabling direct gate drive of both low- and medium-power IGBTs (e.g., 600 V/50 A) and N-channel MOSFETs (e.g., 650 V/80 A). Its 150 ns max propagation delay and ±35 kV/µs CMTI ensure reliable switching even in high-dV/dt half-bridge configurations.
What is the meaning of "(D4-TP4,E" in the TLP5754(D4-TP4,E part number?
"(D4-TP4,E" denotes three package and compliance options: D4 = EN IEC 60747-5-5 reinforced insulation qualification; TP4 = tape-and-reel packaging (1500 pcs/reel); E = RoHS-compliant, lead-free finish. This exact suffix identifies the safety-certified, production-ready, surface-mount variant of the TLP5754 intended for high-volume industrial manufacturing.
How does the UVLO function protect the power stage when using the TLP5754(D4-TP4,E?
The TLP5754(D4-TP4,E incorporates under-voltage lockout with rising threshold at 12.1 V and falling threshold at 11.1 V. When VCC drops below 11.1 V, the output forces low to prevent partial turn-on of the driven IGBT/MOSFET - eliminating shoot-through risk and gate oxide stress. This hysteresis ensures stable re-enabling only after supply recovery, directly enhancing system safety and device longevity.
TLP5754(D4-TP4,E Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Toshiba Semiconductor and Storage
- Series:
- -
- Package/Case:
- 6-SOIC (0.295", 7.50mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Technology:
- Optical Coupling
- Number of Channels:
- 1
- Voltage - Isolation:
- 5000Vrms
- Common Mode Transient Immunity (Min):
- 35kV/µs
- Propagation Delay tpLH / tpHL (Max):
- 150ns, 150ns
- Pulse Width Distortion (Max):
- 50ns
- Rise / Fall Time (Typ):
- 15ns, 8ns
- Current - Output High, Low:
- 3A, 3A
- Current - Peak Output:
- 4A
- Voltage - Forward (Vf) (Typ):
- 1.55V
- Current - DC Forward (If) (Max):
- 20 mA
- Voltage - Output Supply:
- 15V ~ 30V
- Grade:
- -
- Qualification:
- -
- Operating Temperature:
- -40°C ~ 110°C
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-SO
- Approval Agency:
- CQC, CSA, cUL, UL, VDE
TLP5754(D4-TP4,E FAQ
1.How can I place an order for TLP5754(D4-TP4,E through Aetrix?
Please submit a Request for Quotation (RFQ) for TLP5754(D4-TP4,E on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TLP5754(D4-TP4,E reliable?
The price and inventory of TLP5754(D4-TP4,E are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TLP5754(D4-TP4,E is usually 5 days.
3.What payment methods are accepted for TLP5754(D4-TP4,E?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TLP5754(D4-TP4,E transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TLP5754(D4-TP4,E?
TLP5754(D4-TP4,E orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TLP5754(D4-TP4,E order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TLP5754(D4-TP4,E?
For technical support, including TLP5754(D4-TP4,E datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TLP5754(D4-TP4,E requirements.
6.How does Aetrix verify that TLP5754(D4-TP4,E is sourced from the original manufacturer or authorized distributors?
All TLP5754(D4-TP4,E products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TLP5754(D4-TP4,E meets industry standards.
7.What is the process for return or replacement of TLP5754(D4-TP4,E?
All TLP5754(D4-TP4,E units undergo pre-shipment inspection (PSI). If there is an issue with TLP5754(D4-TP4,E, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TLP5754(D4-TP4,E part is unused and in its original packaging.
Return procedure for TLP5754(D4-TP4,E:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TLP5754(D4-TP4,E Tags
.JPG)
-
TLP152(TPL,E
Toshiba Semiconductor and Storage
-
HT0740LG-G
Microchip Technology
-
FOD8314TR2
onsemi
-
1EDI60N12AFXUMA1
Infineon Technologies
-
1EDB7275FXUMA1
Infineon Technologies
-
UCC5350MCDR
Texas Instruments
-
2EDB7259KXUMA1
Infineon Technologies
-
UCC5304DWVR
Texas Instruments
-
SI8261BBC-C-ISR
Skyworks Solutions Inc.
-
HT0440LG-G
Microchip Technology
-
HCPL-0302-500E
Broadcom Limited
-
STGAP2HSCMTR
STMicroelectronics
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
