My Inquiry
My Account
STMicroelectronics TN1515-600B
;;2.jpg)
- Part No.:
- TN1515-600B
- Manufacturer:
- STMicroelectronics
- Category:
- SCRs
- Package:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Datasheet:
-
TN1515-600B.pdf
- Description:
- SCR 600V 15A DPAK
- Quantity:
- Payment:
- Shipping:
Inventory:7,751
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TN1515-600B from STMicroelectronics is a 15 A, 600 V RMS-rated silicon-controlled rectifier (SCR) in DPAK surface-mount package, designed for high-density AC power control. It delivers 165 A non-repetitive surge current (tp = 8.3 ms), features 15 mA gate trigger current (IGT), and operates with 200 V/µs dV/dt immunity at 125 °C - enabling use in universal motor phase control and crowbar protection circuits.
For engineers reviewing the TN1515-600B datasheet, TN1515-600B pinout, TN1515-600B application, or TN1515-600B equivalent, key selection criteria include verified IT(RMS) = 15 A, VDRM/VRRM = 600 V, IGT = 15 mA, thermal resistance Rth(j-c) = 1.2 °C/W, and DPAK mechanical compatibility with FR4 PCB layouts using 0.5 cm² copper area.
Technical Context
The TN1515-600B is a four-layer p-n-p-n thyristor with gate-controlled turn-on and natural commutation. Its latching current (IL ≤ 60 mA) and holding current (IH ≤ 40 mA) ensure reliable conduction initiation and maintenance under varying load conditions. The device sustains 150 A repetitive surge (tp = 10 ms) and exhibits 25 mΩ dynamic on-state resistance (RD) at 125 °C.
Thermal design relies on junction-to-case conduction (Rth(j-c) = 1.2 °C/W) and is validated for Tc = 109 °C operation. Gate drive requires ≥2 mA minimum IGT and tolerates up to 5 V reverse gate voltage (VRGM), supporting robust triggering in noisy industrial environments.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| IT(RMS) | 15 A - supports continuous AC load current up to 15 A at 180° conduction angle with case temperature ≤109 °C |
| VDRM / VRRM | 600 V - blocks 600 V peak off-state voltage in both forward and reverse directions |
| IGT | 15 mA max - gate trigger current sufficient for standard 12 V/33 Ω driver circuits |
| dV/dt | 200 V/µs min - prevents false turn-on during rapid voltage transients at 125 °C junction temperature |
| Rth(j-c) | 1.2 °C/W - enables direct heatsinking via DPAK tab; 15 A operation requires ≤18 °C temperature rise across case interface |
| ITSM (tp = 8.3 ms) | 165 A - withstands single-cycle AC line surges without failure |
| VTM | 1.6 V max at 30 A - limits conduction loss to ≤48 W instantaneous power dissipation |
Pinout & Package
The TN1515-600B uses a 3-terminal DPAK (TO-252) surface-mount package with exposed metal tab serving as the cathode connection. Package dimensions comply with ST's mechanical drawing: D = 6.22 mm, E = 6.73 mm, L = 1.78 mm, and tab thickness A2 = 0.23 mm.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode (A) | Main current entry terminal | Connected to AC line or high-side load; must withstand full VDRM and ITSM stress |
| Cathode (K) | Main current exit terminal & thermal path | Exposed metal tab - electrically and thermally tied to PCB copper pour (SCU = 0.5 cm² recommended) |
| Gate (G) | Control input for turn-on | Low-energy trigger point; requires ≥2 mA IGT and ≤1.3 V VGT; sensitive to noise above VRGM = 5 V |
Key Features
| Feature | Design Value |
|---|---|
| High surge current density | 165 A non-repetitive peak (tp = 8.3 ms) enables robust overvoltage protection without external fusing |
| DPAK surface-mount footprint | Compact 6.22 × 6.73 mm outline allows high-power density layout on automated SMT lines |
| 125 °C dV/dt immunity | 200 V/µs minimum ensures stable operation in high-noise motor drive and regulator environments |
| Lead-free & halogen-free | ECOPACK®-compliant construction meets RoHS and JEDEC J-STD-020 reflow requirements |
Applications
| Universal Motor Control | Power Supply Crowbar |
|---|---|
Use Scenario: Phase-angle control of brushed universal motors in power tools and vacuum cleaners. IC Role / Device Role / Timing Role: Main AC switching element triggered synchronously with zero-crossing detection to regulate torque/speed. Use Value: 15 A RMS rating and 165 A surge capability handle motor startup inrush without derating. | Use Scenario: Overvoltage protection circuit that shorts output to ground when DC bus exceeds safe threshold. IC Role / Device Role / Timing Role: Fast-acting crowbar switch activated by comparator-driven gate pulse. Use Value: 200 V/µs dV/dt immunity prevents spurious triggering during transient events. |
| AC-DC Voltage Regulator | Motor Soft Start Controller |
Use Scenario: Adjustable AC mains voltage feed to linear regulator or transformer primary. IC Role / Device Role / Timing Role: Thyristor-based phase-controlled rectifier delivering variable DC output after bridge rectification. Use Value: 1.6 V VTM and 25 mΩ RD minimize conduction losses across 0–100% load range. | Use Scenario: Gradual ramp-up of AC voltage to induction or universal motors to limit mechanical stress. IC Role / Device Role / Timing Role: Controlled conduction angle expansion over time via microcontroller-gated SCR firing. Use Value: 60 mA max latching current (IL) ensures reliable turn-on even with aging gate drivers. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar SCR-based AC power control applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ST's TN1215-600B | 12 A IT(RMS), same VDRM/VRRM and DPAK package | Lower RMS current rating reduces thermal margin in sustained 15 A loads | Select when average load current remains ≤12 A and board space constraints match DPAK |
| ON Semiconductor's MCR12L6 | 12 A IT(RMS), TO-220 package, higher IGT (50 mA) | Through-hole mounting and higher gate drive requirement increase system cost and layout complexity | Choose only if legacy TO-220 footprint or higher surge tolerance (200 A) is prioritized over SMT efficiency |
Compared with TN1215-600B and MCR12L6, the TN1515-600B uniquely combines 15 A RMS rating, DPAK SMT compatibility, and 15 mA IGT in a single device - making it optimal for new designs requiring high-current density and automated assembly.
Availability
TN1515-600B is available at Aetrix Electronics and suitable for universal motor control, power supply crowbar circuits, and AC-DC voltage regulators requiring stable component supply across industrial production cycles.
Supply support for TN1515-600B includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing analog, MCU, power, and sensor solutions for automotive, industrial, and consumer markets.
The TN1515-600B belongs to ST's high-voltage SCR series targeting compact, high-reliability AC power switching - engineered specifically for SMT-based motor control, protection, and regulation where thermal performance and surge robustness are critical.
FAQ
What is the maximum allowable junction temperature for continuous operation?
The TN1515-600B has an operating junction temperature range of –40 °C to +125 °C. For continuous 15 A RMS conduction, case temperature must be maintained at or below 109 °C per absolute ratings table - requiring thermal design with Rth(j-c) = 1.2 °C/W and adequate PCB copper area (0.5 cm² minimum).
Can the TN1515-600B be used in DC circuits?
No - the TN1515-600B is a half-wave controlled rectifier requiring natural current zero-crossing to commutate. It cannot sustain conduction in pure DC; forced commutation or additional circuitry would be required, which is outside its specified operation and not supported by ST's characterization.
Is the DPAK tab electrically isolated from the cathode?
No - the exposed metal tab of the DPAK package is internally connected to the cathode (K) terminal. This provides both electrical continuity and low-thermal-resistance heat transfer to the PCB copper pour, but requires appropriate isolation planning in high-voltage layouts.
What gate drive circuit is recommended for reliable triggering?
ST specifies a 12 V source with 33 Ω series resistor (delivering ~15 mA IGT) at 25 °C. At elevated temperatures, IGT may rise to 15 mA max; therefore, gate drivers should guarantee ≥15 mA into ≤1.3 V VGT while limiting peak gate current to 4 A (per IGM rating) and avoiding reverse gate voltage exceeding 5 V (VRGM).
TN1515-600B Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- -
- Package/Case:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Packaging:
- Tube
- Product Status:
- Obsolete
- Voltage - Off State:
- 600 V
- Voltage - Gate Trigger (Vgt) (Max):
- 1.3 V
- Current - Gate Trigger (Igt) (Max):
- 15 mA
- Voltage - On State (Vtm) (Max):
- 1.6 V
- Current - On State (It (AV)) (Max):
- 9.5 A
- Current - On State (It (RMS)) (Max):
- 15 A
- Current - Hold (Ih) (Max):
- 40 mA
- Current - Off State (Max):
- 5 µA
- Current - Non Rep. Surge 50, 60Hz (Itsm):
- 150A, 165A
- SCR Type:
- Standard Recovery
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DPAK
TN1515-600B FAQ
1.How can I place an order for TN1515-600B through Aetrix?
Please submit a Request for Quotation (RFQ) for TN1515-600B on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TN1515-600B reliable?
The price and inventory of TN1515-600B are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TN1515-600B is usually 5 days.
3.What payment methods are accepted for TN1515-600B?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TN1515-600B transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TN1515-600B?
TN1515-600B orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TN1515-600B order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TN1515-600B?
For technical support, including TN1515-600B datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TN1515-600B requirements.
6.How does Aetrix verify that TN1515-600B is sourced from the original manufacturer or authorized distributors?
All TN1515-600B products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TN1515-600B meets industry standards.
7.What is the process for return or replacement of TN1515-600B?
All TN1515-600B units undergo pre-shipment inspection (PSI). If there is an issue with TN1515-600B, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TN1515-600B part is unused and in its original packaging.
Return procedure for TN1515-600B:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TN1515-600B Tags
-
MCR12DSNT4G
Littelfuse Inc.
-
2N6404G
Littelfuse Inc.
-
S4015LTP
Littelfuse Inc.
-
VS-25TTS12HM3
Vishay General Semiconductor - Diodes Division
-
S4020LTP
Littelfuse Inc.
-
MCR12MG
Littelfuse Inc.
-
MCR69-3G
Littelfuse Inc.
-
S8025LTP
Littelfuse Inc.
-
CMA30E1600PN
IXYS
-
S8016RATP
Littelfuse Inc.
-
TXN625RG
STMicroelectronics
.jpg)
-
SK055RTP
Littelfuse Inc.
Tech Hub
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
