My Inquiry
My Account
Texas Instruments TPS622314TDRYRQ1
- Part No.:
- TPS622314TDRYRQ1
- Manufacturer:
- Texas Instruments
- Package:
- 6-UFDFN
- Datasheet:
-
TPS622314TDRYRQ1.pdf
- Description:
- IC REG BUCK 1.5V 500MA 6SON
- Quantity:
- Payment:
- Shipping:
Inventory:1,338
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TPS622314TDRYRQ1 from Texas Instruments is an AEC-Q100 qualified 3-MHz synchronous step-down DC-DC converter delivering fixed 1.5 V output at up to 500 mA, operating from 2.05 V to 6 V input, housed in a 1 × 1.5 × 0.6 mm³ 6-pin SON (DRY) package with 12 mm² minimum solution size.
For engineers reviewing the TPS622314TDRYRQ1 datasheet, TPS622314TDRYRQ1 pinout, TPS622314TDRYRQ1 application, or TPS622314TDRYRQ1 equivalent, key selection considerations include automotive-grade reliability, forced-PWM/Power-Save mode control via MODE pin, 22 μA quiescent current in PFM, 94% peak efficiency, and compatibility with 1 μH or 2.2 μH inductors and 4.7 μF output capacitor.
Technical Context
The TPS622314TDRYRQ1 implements a hysteretic PWM controller topology enabling >3 MHz switching frequency, excellent AC load regulation, and stable operation with minimal external components. It integrates high-side and low-side MOSFETs with RDS(ON) of 600–850 mΩ (PMOS) and 350–480 mΩ (NMOS) at 105°C.
Functional modes include Power Save Mode (MODE = GND) for ultra-low IQ (22 μA), forced PWM Mode (MODE = VIN) for fixed-frequency noise control, 100% duty-cycle low-dropout operation near VIN ≈ VOUT, and thermal shutdown at 150°C with 20°C hysteresis. Soft-start time is 100 μs typical.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Output Voltage | Fixed 1.5 V - eliminates need for external feedback resistors; supports precision rail for automotive sensors or logic. |
| Input Voltage Range | 2.05 V to 6 V - enables direct Li-ion battery (2.7–4.2 V) or pre-regulated 3.3/5 V rail operation without intermediate stage. |
| Switching Frequency | 3 MHz nominal - allows use of tiny 1 μH or 2.2 μH inductors and reduces EMI filter size; supports >3.8 MHz under specific conditions. |
| Max Output Current | 500 mA - sufficient for powering camera image signal processors (ISPs), radar MMIC bias, or MCU cores in ADAS modules. |
| Quiescent Current | 22 μA in Power Save Mode - extends battery life in always-on automotive telematics or eCall standby states. |
| Efficiency | Up to 94% - significantly exceeds linear regulators, reducing thermal load in confined 12 mm² PCB footprints. |
| Package | 6-pin SON (DRY), 1 × 1.5 × 0.6 mm³ - ultra-small footprint compatible with automated SMT assembly and space-constrained automotive modules. |
Pinout & Package
TPS622314TDRYRQ1 uses a 6-pin 1 × 1.5 mm² SON (DRY) package with wettable flanks, optimized for thermal performance (RθJA = 294.5°C/W) and reflow-solderability in automotive production.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 - MODE | Digital control input | High = forced PWM mode (fixed frequency, no pulse skipping); Low = automatic Power Save Mode (PFM/PWM transition); must be terminated. |
| 2 - SW | Switch node | Connects to inductor; carries high-frequency pulsed current; requires tight layout to minimize EMI and voltage spikes. |
| 3 - VIN | Main power input | Accepts 2.05–6 V; requires local 2.2 μF ceramic input capacitor placed adjacent to pin for stability and transient response. |
| 4 - GND | Power ground | Common return path for VIN, SW, FB, EN, MODE; must connect to solid thermal pad on PCB for heat dissipation. |
| 5 - EN | Enable control input | High = active operation; Low = shutdown (<1 μA IQ); supports power sequencing with other rails in multi-rail systems. |
| 6 - FB | Feedback input | Internally connected to 0.70 V reference; connects directly to output capacitor for regulation; no external resistor divider needed (fixed 1.5 V). |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 Grade 1 qualification | Rated for –40°C to +125°C junction temperature - certified for front/rear camera, surround-view, and blind-spot monitoring systems. |
| Ultra-small solution size | ≤12 mm² total area with 1 μH inductor and 4.7 μF capacitor - enables integration into compact ADAS ECUs where board space is constrained. |
| Optimized Power Save Mode | 22 μA IQ with low-output-ripple PFM operation - maintains clean supply for noise-sensitive analog/RF blocks without sacrificing efficiency at light loads. |
| Forced PWM Mode | Enables deterministic switching frequency across full load range - simplifies EMI filtering and meets strict CISPR-25 Class 5 requirements in automotive applications. |
| 100% duty-cycle operation | Supports dropout as low as VIN − VOUT ≈ RDS(ON) × IOUT - maximizes usable battery voltage range in 12 V automotive systems with buck-boost pre-regulation. |
Applications
| Front Camera Power Supply | Rear View Camera Module |
|---|---|
Use Scenario: Powers image sensor and ISP in automotive front-facing ADAS camera, operating continuously during vehicle motion. IC Role / Device Role / Timing Role: Primary 1.5 V power rail generator with fast transient response to handle burst-mode sensor readout currents. Use Value: 3 MHz switching avoids interference with sensor pixel clock harmonics; 94% efficiency minimizes self-heating in sealed camera housing. | Use Scenario: Supplies 1.5 V to CMOS image sensor and video encoder in rear-view backup camera, activated only when reverse gear is engaged. IC Role / Device Role / Timing Role: Always-on standby regulator with 22 μA quiescent current, enabling instant wake-up without boot delay. Use Value: Ultra-low IQ extends vehicle battery life during long parking periods; 12 mm² solution fits within narrow camera PCB width. |
| Blind-Spot Monitoring Radar Bias | Automotive Telematics eCall Module |
Use Scenario: Provides stable 1.5 V bias to RF transceiver ICs and low-noise amplifiers in 24 GHz radar modules mounted in side mirrors. IC Role / Device Role / Timing Role: Low-ripple, high-PSRR (up to 90 dB) voltage source replacing LDO to improve power efficiency without degrading RF SNR. Use Value: Forced PWM mode eliminates sub-audible switching noise that could modulate radar IF signals; 1.5 V matches common RF IC core voltage. | Use Scenario: Powers microcontroller, GNSS receiver, and cellular modem in emergency call (eCall) telematics control unit, requiring reliable operation over full automotive temperature range. IC Role / Device Role / Timing Role: Main system rail regulator with thermal shutdown (150°C) and undervoltage lockout (1.8 V falling threshold) for robustness in harsh environments. Use Value: AEC-Q100 qualification ensures compliance with UNECE R155 functional safety requirements; soft-start prevents inrush current during cold cranking. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar step-down converter applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPS62231TDRYRQ1 | Fixed 1.8 V output; identical pinout, package, and electrical specs except VOUT. | Suitable for 1.8 V FPGA I/O banks or microcontroller cores requiring higher rail than 1.5 V. | Select when system requires 1.8 V instead of 1.5 V; no layout change needed. |
| TPS6282518RQWR | Higher 6 MHz switching frequency, 1.8 V output, 1 A rating, smaller 1.2 × 0.8 mm² WCSP package, lower 15 μA IQ. | Better suited for next-gen ADAS with tighter space constraints and higher current demands; not pin-compatible. | Choose for new designs needing higher current or smaller footprint; requires PCB redesign. |
Compared with TPS622314TDRYRQ1, TPS62231TDRYRQ1 offers identical form-factor and functionality at 1.8 V, while TPS6282518RQWR delivers higher performance in a different package-making the former a drop-in alternative and the latter a forward-looking upgrade requiring layout revision.
Availability
TPS622314TDRYRQ1 is available at Aetrix Electronics and suitable for advanced driver-assistance systems (ADAS), automotive telematics, and space-optimized industrial power systems requiring stable component supply across extended temperature and lifecycle requirements.
Supply support for TPS622314TDRYRQ1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Texas Instruments is a global semiconductor company specializing in analog and embedded processing technologies, with leadership in automotive, industrial, and power management solutions.
The TPS6223x-Q1 product line delivers ultra-small, high-frequency synchronous buck converters designed specifically for AEC-Q100-compliant ADAS and infotainment subsystems where board area, thermal performance, and reliability are critical.
FAQ
What is the output voltage of the TPS622314TDRYRQ1?
The TPS622314TDRYRQ1 provides a fixed 1.5 V output voltage. This value is factory-trimmed and does not require external feedback resistors. The device achieves ±2.5% output voltage accuracy over –40°C to +105°C ambient temperature, with internal 0.70 V reference connected to the FB pin. The TPS622314TDRYRQ1 is part of the TPS6223x-Q1 family, where the "14" suffix explicitly denotes the 1.5 V variant.
Does the TPS622314TDRYRQ1 support forced PWM mode?
Yes, the TPS622314TDRYRQ1 supports forced PWM mode via the MODE pin. When MODE is pulled high (≥0.8 V), the device operates continuously in PWM mode across all load conditions, eliminating pulse-frequency modulation (PFM) and ensuring a quasi-fixed switching frequency. This mode is essential for noise-sensitive applications like radar receivers or audio subsystems where predictable EMI spectra are required. The TPS622314TDRYRQ1 retains its 3 MHz nominal frequency in this mode but allows slight variation with input/output voltage and load.
What is the minimum input voltage required for the TPS622314TDRYRQ1 to start up?
The TPS622314TDRYRQ1 requires a minimum input voltage of 2.05 V to initiate startup. This threshold is defined by the undervoltage lockout (UVLO) circuit, which has a falling threshold of 1.8 V (typical) and rising threshold of 1.9–2.05 V. Below 2.05 V, the device remains in UVLO and will not enable switching, even if EN is high. Once VIN rises above the rising UVLO threshold, the internal soft-start begins, reaching regulated 1.5 V output in approximately 100 μs. The TPS622314TDRYRQ1 remains functional down to the falling UVLO level during operation.
Can the TPS622314TDRYRQ1 operate with a 1 µH inductor?
Yes, the TPS622314TDRYRQ1 is fully characterized and optimized for use with a 1 µH inductor, as confirmed in the datasheet's Recommended Operating Conditions and Typical Application sections. The device's internal compensation is tuned for stable operation with 1 µH (or 2.2 µH) inductance paired with a 4.7 µF output capacitor. Using a 1 µH inductor yields higher ripple current but enables the smallest possible solution size and faster transient response-ideal for ADAS camera modules where board area is constrained and dynamic load steps occur frequently.
Is the TPS622314TDRYRQ1 pin-compatible with other devices in the TPS6223x-Q1 family?
Yes, the TPS622314TDRYRQ1 is pin-compatible with other members of the TPS6223x-Q1 family, including TPS62231TDRYRQ1 (1.8 V) and TPS62232TDRYRQ1 (1.2 V). All share the identical 6-pin DRY (SON) package, identical pin configuration (MODE, SW, VIN, GND, EN, FB), and identical recommended external component values. This allows designers to reuse PCB layouts across multiple output voltage variants, simplifying BOM management and enabling rapid voltage rail optimization during system validation without hardware changes.
TPS622314TDRYRQ1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Texas Instruments
- Series:
- -
- Package/Case:
- 6-UFDFN
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Function:
- Step-Down
- Output Configuration:
- Positive
- Topology:
- Buck
- Output Type:
- Fixed
- Number of Outputs:
- 1
- Voltage - Input (Min):
- 2.05V
- Voltage - Input (Max):
- 6V
- Voltage - Output (Min/Fixed):
- 1.5V
- Voltage - Output (Max):
- -
- Current - Output:
- 500mA
- Frequency - Switching:
- 3MHz
- Synchronous Rectifier:
- Yes
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-SON (1.45x1)
TPS622314TDRYRQ1 FAQ
1.How can I place an order for TPS622314TDRYRQ1 through Aetrix?
Please submit a Request for Quotation (RFQ) for TPS622314TDRYRQ1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TPS622314TDRYRQ1 reliable?
The price and inventory of TPS622314TDRYRQ1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TPS622314TDRYRQ1 is usually 5 days.
3.What payment methods are accepted for TPS622314TDRYRQ1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TPS622314TDRYRQ1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TPS622314TDRYRQ1?
TPS622314TDRYRQ1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TPS622314TDRYRQ1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TPS622314TDRYRQ1?
For technical support, including TPS622314TDRYRQ1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TPS622314TDRYRQ1 requirements.
6.How does Aetrix verify that TPS622314TDRYRQ1 is sourced from the original manufacturer or authorized distributors?
All TPS622314TDRYRQ1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TPS622314TDRYRQ1 meets industry standards.
7.What is the process for return or replacement of TPS622314TDRYRQ1?
All TPS622314TDRYRQ1 units undergo pre-shipment inspection (PSI). If there is an issue with TPS622314TDRYRQ1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TPS622314TDRYRQ1 part is unused and in its original packaging.
Return procedure for TPS622314TDRYRQ1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TPS622314TDRYRQ1 Tags
-
TPS562201DDCR
Texas Instruments
-
MC34063ABD-TR
STMicroelectronics
-
TPS561201DDCR
Texas Instruments
-
MC33063ADR
Texas Instruments
-
MC34063ADR
Texas Instruments
-
TPS560200DBVR
Texas Instruments
-
AP3012KTR-G1
Diodes Incorporated
-
TLV61048DBVR
Texas Instruments
-
AZ34063UMTR-G1
Diodes Incorporated
-
TPS562200DDCR
Texas Instruments
-
AP62300TWU-7
Diodes Incorporated
-
MC34063EBD-TR
STMicroelectronics
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
