My Inquiry
My Account
STMicroelectronics TS522ID
- Part No.:
- TS522ID
- Manufacturer:
- STMicroelectronics
- Category:
- Instrumentation, Op Amps, Buffer Amps
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
TS522ID.pdf
- Description:
- IC AUDIO 2 CIRCUIT 8SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:2,840
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
TS522ID from STMicroelectronics is a precision dual operational amplifier optimized for high-fidelity audio signal conditioning. It delivers 15 MHz gain bandwidth, 7 V/μs slew rate, ±14.3 V/–14.6 V output swing (RL = 10 kΩ), and ultra-low 4.5 nV/√Hz input voltage noise - enabling low-distortion amplification in line-level and preamplifier stages.
For engineers reviewing the TS522ID datasheet, TS522ID pinout, TS522ID application, or TS522ID equivalent, key selection criteria include input offset voltage (≤1.7 mV), common-mode rejection (80–100 dB), supply voltage range (±2.5 V to ±15 V), thermal resistance (125 °C/W for SO-8), and automotive-grade availability (TS522IYDT).
Technical Context
The TS522ID integrates two matched, internally compensated op-amps with rail-to-rail output stage capability and symmetrical source/sink current (29 mA sink / 20 mA source). Its architecture supports stable unity-gain operation (phase margin ≥30° at CL = 100 pF) and maintains ≤0.002% THD across 20 Hz–20 kHz at 3 Vrms output.
Designed for bipolar ±15 V operation, it features 175 kΩ input resistance, 12 pF input capacitance, and 37 Ω output impedance at 9 MHz - ensuring predictable loading behavior in multi-stage audio filters and active crossovers.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Gain bandwidth product | 15 MHz - enables stable closed-loop gain up to ×100 at 150 kHz without peaking |
| Slew rate | 7 V/μs - preserves transient fidelity for 20 kHz full-scale audio signals (≥2.8 V/μs required) |
| Input voltage noise | 4.5 nV/√Hz at 1 kHz - minimizes audible hiss in microphone preamp and phono stage designs |
| Output voltage swing | ±14.3 V / –14.6 V (RL = 10 kΩ) - delivers >28 Vpp headroom into high-impedance loads |
| Input offset voltage | ≤1.7 mV max - reduces DC error in DC-coupled active filters and summing amplifiers |
| Common-mode rejection | 80–100 dB - suppresses power supply ripple and ground-bounce coupling in single-supply-derived rails |
| THD + noise | 0.002% at 20 Hz–20 kHz - meets Hi-Fi grade distortion requirements for consumer and pro-audio gear |
Pinout & Package
TS522ID is supplied in an SO-8 plastic micropackage (ECOPACK® compliant), with 1.27 mm pitch, 4.90 mm width, and 6.00 mm length. Thermal resistance is 125 °C/W (junction-to-ambient) and 40 °C/W (junction-to-case).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Inverting input (Amplifier 1) | Differential node for negative feedback configuration; accepts ±13 V common-mode range |
| 2 | Non-inverting input (Amplifier 1) | High-impedance reference node; 175 kΩ input resistance minimizes bias current error |
| 3 | Output (Amplifier 1) | Capable of sourcing 20 mA / sinking 29 mA into 600 Ω load |
| 4 | VCC− | Negative supply rail connection; must be decoupled within 1 cm of pin |
| 5 | VCC+ | Positive supply rail connection; shared by both amplifiers; requires local 100 nF ceramic bypass |
| 6 | Inverting input (Amplifier 2) | Independent differential input; matched to Pin 1 for stereo channel tracking |
| 7 | Non-inverting input (Amplifier 2) | Independent high-Z input; 12 pF capacitance affects RF immunity above 10 MHz |
| 8 | Output (Amplifier 2) | Electrically isolated output stage; 120 dB channel separation prevents crosstalk at audio frequencies |
Key Features
| Feature | Design Value |
|---|---|
| Low input offset voltage drift | 2 μV/°C - ensures <10 μV total drift over –40°C to +125°C operating range |
| High slew rate with low distortion | 7 V/μs + 0.002% THD - enables clean 20 kHz square wave reproduction without overshoot |
| Large symmetrical output swing | ±14.3 V / –14.6 V - supports 28.6 Vpp dynamic range into 10 kΩ, critical for line-driver applications |
| Robust ESD protection | 2 kV HBM - withstands handling during PCB assembly without external clamping diodes |
| Wide supply voltage range | ±2.5 V to ±15 V - accommodates legacy ±12 V systems and modern ±15 V studio equipment rails |
Applications
| Professional Audio Mixer Channel Strip | Automotive Infotainment Line Output Driver |
|---|---|
Use Scenario: Dual-channel analog signal path in 24-channel digital mixer front-end, handling mic/line inputs and monitor outputs. IC Role / Device Role / Timing Role: Precision dual op-amp performing DC-coupled gain staging, active filtering, and balanced output buffering. Use Value: 120 dB channel separation and ≤1.7 mV offset prevent inter-channel leakage and DC offset accumulation across cascaded stages. | Use Scenario: Driving RCA or 3.5 mm auxiliary outputs from head unit DSP to external amplifiers in vehicles with wide ambient temperature swings. IC Role / Device Role / Timing Role: Dual-output line driver delivering low-noise, high-swing analog audio to unbalanced consumer inputs. Use Value: ±14.3 V swing and –40°C to +125°C operation ensure full dynamic range retention under battery voltage sag and under-hood thermal stress. |
| Hi-Fi DAC Output Buffer | Industrial Test Equipment Signal Generator |
Use Scenario: Post-DAC reconstruction filter and current-to-voltage conversion in 114 dB SNR DAC modules for audiophile streamers. IC Role / Device Role / Timing Role: Dual op-amp implementing I/V conversion and passive/active anti-imaging filtering. Use Value: 4.5 nV/√Hz noise floor preserves DAC's inherent resolution; 15 MHz GBP supports steep 8th-order filter roll-off without phase lag. | Use Scenario: Generating calibrated sine, square, and triangle waveforms (20 Hz–200 kHz) in benchtop function generators with <0.01% amplitude flatness. IC Role / Device Role / Timing Role: Dual op-amp used in waveform shaping, amplitude control, and output isolation stages. Use Value: 7 V/μs slew rate ensures ≤0.1% harmonic distortion on 10 Vpp 20 kHz square waves; 100 dB CMRR rejects power supply modulation. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual precision op-amp applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| NE5532DR | Higher input bias current (800 nA vs. 750 nA typ), lower GBP (10 MHz), no guaranteed 125°C operation | Established in legacy audio gear; lacks AEC-Q100 qualification for automotive use | Select when cost sensitivity outweighs extended temperature or noise performance needs |
| OPA2134PA | FET-input (50 pA ib), lower noise (8 nV/√Hz), but only 8 MHz GBP and ±13.5 V swing (RL = 10 kΩ) | Better for ultra-high-Z sensor interfaces; insufficient slew rate for fast transient audio | Prefer for piezoelectric or photodiode preamps where input impedance >1 GΩ is mandatory |
Compared with NE5532DR and OPA2134PA, TS522ID uniquely balances low noise (4.5 nV/√Hz), high slew rate (7 V/μs), full automotive temperature range (–40°C to +125°C), and SO-8 ECOPACK® compliance - making it optimal for next-generation audio subsystems requiring reliability and fidelity.
Availability
TS522ID is available at Aetrix Electronics and suitable for professional audio mixer channel strips, automotive infotainment line drivers, and Hi-Fi DAC output buffers requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for TS522ID includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, power ICs, sensors, and analog components for industrial, automotive, and consumer markets.
The TS522 belongs to ST's precision analog op-amp product line, engineered specifically for high-fidelity audio signal chains where low noise, low distortion, and robust output drive are non-negotiable.
FAQ
What is the maximum recommended supply voltage for continuous operation of TS522ID?
The absolute maximum supply voltage is ±18 V, but continuous operation must remain within the specified operating range of ±2.5 V to ±15 V. Exceeding ±15 V risks parametric shift and accelerated aging, even if within absolute limits. The device achieves optimal noise and distortion performance at ±15 V, with full output swing and thermal stability verified across –40°C to +125°C.
Does TS522ID require external compensation for unity-gain stable operation?
No external compensation is required. TS522ID is internally compensated for unity-gain stability, with measured phase margin ≥30° at 100 pF capacitive load and ≥55° with no load. This allows direct use in voltage-follower, inverting, and non-inverting configurations without risk of oscillation - confirmed by Figure 8 (gain/phase vs. frequency) in the official datasheet.
How does the TS522ID's channel separation performance impact stereo audio design?
With 120 dB channel separation from 20 Hz to 20 kHz, TS522ID prevents audible crosstalk between left/right channels in stereo line drivers and mixer buses. This specification is measured under real-world conditions (RL = 2 kΩ, full signal swing) and ensures >100 dB stereo imaging integrity - critical for mastering consoles and high-resolution streaming endpoints where inter-channel isolation directly impacts perceived soundstage width.
Can TS522ID be used in single-supply configurations?
TS522ID is specified for dual-supply operation (±2.5 V to ±15 V) and lacks rail-to-rail input capability - its common-mode input range is limited to ±13 V with ±15 V supplies. While it can operate with split virtual grounds (e.g., using resistive dividers and decoupling caps), ST does not characterize or guarantee performance in true single-supply mode. For dedicated single-supply audio op-amps, ST recommends the TSV912 or TS912 families.
TS522ID Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- -
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tube
- Product Status:
- Obsolete
- Amplifier Type:
- Audio
- Number of Circuits:
- 2
- Output Type:
- -
- Slew Rate:
- 7V/µs
- Gain Bandwidth Product:
- 15 MHz
- -3db Bandwidth:
- -
- Current - Input Bias:
- 250 nA
- Voltage - Input Offset:
- 850 µV
- Current - Supply:
- 4mA
- Current - Output / Channel:
- 37 mA
- Voltage - Supply Span (Min):
- 5 V
- Voltage - Supply Span (Max):
- 30 V
- Operating Temperature:
- -40°C ~ 125°C
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOIC
TS522ID FAQ
1.How can I place an order for TS522ID through Aetrix?
Please submit a Request for Quotation (RFQ) for TS522ID on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for TS522ID reliable?
The price and inventory of TS522ID are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for TS522ID is usually 5 days.
3.What payment methods are accepted for TS522ID?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for TS522ID transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for TS522ID?
TS522ID orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your TS522ID order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for TS522ID?
For technical support, including TS522ID datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your TS522ID requirements.
6.How does Aetrix verify that TS522ID is sourced from the original manufacturer or authorized distributors?
All TS522ID products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that TS522ID meets industry standards.
7.What is the process for return or replacement of TS522ID?
All TS522ID units undergo pre-shipment inspection (PSI). If there is an issue with TS522ID, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The TS522ID part is unused and in its original packaging.
Return procedure for TS522ID:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
TS522ID Tags
-
LM358DT
STMicroelectronics
-
LM358DR
Texas Instruments
-
LM2904DR
Texas Instruments
-
LM358ADR
Texas Instruments
-
LM2904DGKR
Texas Instruments
-
LM324DR
Texas Instruments
-
MCP6006T-E/OT
Microchip Technology
-
MCP6006UT-E/OT
Microchip Technology
-
LM324PWR
Texas Instruments
-
LM2902PWR
Texas Instruments
-
LM2902DR
Texas Instruments
-
LM358P
Texas Instruments
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
