Texas Instruments TUSB6010BIZQER

Overview

TUSB6010BIZQER from Texas Instruments is a USB 2.0 High-Speed (480 Mbps) On-The-Go (OTG) Dual Role Controller IC with integrated PHY, 16 kB endpoint FIFO RAM, NOR FLASH–like 16-bit multiplexed host interface, and ultra-low-power IDLE mode (<100 µA). It operates as USB peripheral, embedded host, or OTG device in portable handset applications.

For engineers reviewing the TUSB6010BIZQER datasheet, TUSB6010BIZQER pinout, TUSB6010BIZQER application, or TUSB6010BIZQER equivalent, key selection considerations include OTG dual-role capability, dynamic FIFO sizing support, SRP/HNP protocol compliance, external DMA access to FIFOs, and integration with TPS65030 power management IC.

Technical Context

The TUSB6010BIZQER implements a configurable USB 2.0 HS OTG controller core with UTMI+ Level 3 PHY interface, supporting three operational states-RESET, IDLE, and NORMAL-with synchronous reset exit and VBUS/ID detection circuitry active in IDLE. Its NOR FLASH–like interface supports burst and single-cycle reads/writes in synchronous or asynchronous modes at up to 60 MHz.

Power management includes dedicated control for external charge pump and seamless interfacing with TPS65030 via power control/status signals. Eight GPIO pins are user-configurable for interrupt/wakeup or NOR-flash DMA request functions, and ESD protection meets 2 kV HBM (JESD22-A114D) and 500 V CDM (JESD22-C101C).

Key Specifications

Pinout & Package

Package: 80-terminal BGA MICROSTAR Junior (ZQE), 5.3 mm × 5.3 mm, 0.8 mm pitch, Q1 pin 1 quadrant.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar USB 2.0 OTG controller applications.

Compared with ISP1583B and USB334x series, the TUSB6010BIZQER delivers higher integration-combining controller, 16 kB FIFO, PHY, and NOR-like host interface in one 5.3 mm × 5.3 mm BGA-reducing board space and firmware complexity for high-volume handset designs.

Availability

TUSB6010BIZQER is available at Aetrix Electronics and suitable for smartphone connectivity, portable media player host mode, USB OTG docking stations, and industrial handheld terminals requiring stable component supply and long-term lifecycle support.

Supply support for TUSB6010BIZQER includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Texas Instruments is a global semiconductor company headquartered in Dallas, Texas, delivering analog, embedded processing, and connectivity solutions across industrial, automotive, and personal electronics markets.

The TUSB6010BIZQER belongs to TI's USB connectivity product line, engineered specifically for high-volume, battery-powered mobile handsets requiring compact, low-power, dual-role USB 2.0 OTG functionality with minimal external components.

FAQ

What is the primary function of the TUSB6010BIZQER?

The TUSB6010BIZQER is a USB 2.0 High-Speed On-The-Go Dual Role Controller IC that enables a single device to operate as a USB peripheral, embedded host, or OTG device. It integrates the controller core, 16 kB endpoint FIFO RAM, USB 2.0 OTG PHY, and a NOR FLASH–like host interface. The TUSB6010BIZQER supports SRP and HNP protocols and is optimized for low-power operation in portable handset applications.

Does the TUSB6010BIZQER require an external USB transceiver?

No, the TUSB6010BIZQER does not require an external USB transceiver because it includes a fully integrated USB 2.0 OTG PHY with DP/DM differential drivers and receivers. The PHY complies with UTMI+ Level 3 specifications and handles signal integrity, termination, and VBUS/ID detection internally. This integration eliminates the need for discrete PHY components in designs using the TUSB6010BIZQER.

What host processor interface does the TUSB6010BIZQER use?

The TUSB6010BIZQER uses a 16-bit multiplexed NOR FLASH–like interface compatible with standard memory controllers found in ARM9, ARM11, and other embedded processors. It supports both synchronous and asynchronous operation, burst and single-cycle read/write access, and operates at up to 60 MHz. This interface simplifies host integration without requiring custom logic or bridge chips in systems using the TUSB6010BIZQER.

How does the TUSB6010BIZQER manage power in battery-operated devices?

The TUSB6010BIZQER features an ultra-low-power IDLE state drawing less than 100 µA total system current-including companion TPS65030-while maintaining VBUS and ID detection capability. It supports external charge pump control and integrates seamlessly with TI's TPS65030 PMIC. Power transitions between RESET, IDLE, and NORMAL states are hardware-managed, enabling rapid wake-up and minimizing active-time energy consumption in the TUSB6010BIZQER.

Is the TUSB6010BIZQER RoHS compliant and what package does it use?

Yes, the TUSB6010BIZQER is RoHS compliant per manufacturer documentation. It is packaged in an 80-terminal BGA MICROSTAR Junior (ZQE) package measuring 5.3 mm × 5.3 mm with 0.8 mm pitch and Q1 pin 1 quadrant orientation. This compact, fine-pitch BGA supports high-density portable designs and is qualified for high-volume handset manufacturing, as confirmed in TI's official packaging materials documentation for the TUSB6010BIZQER.