Renesas UPD78F0535AFC-AA1-A
- Part No.:
- UPD78F0535AFC-AA1-A
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 64-VFLGA
- Datasheet:
-
UPD78F0535AFC-AA1-A.pdf
- Description:
- IC MCU 8BIT 60KB FLASH 64FLGA
- Quantity:
- Payment:

- Shipping:

Inventory:1,682
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
UPD78F0535AFC-AA1-A from Renesas Electronics is an 8-bit single-chip microcontroller in the 78K0/KE2 family, featuring 64 KB on-chip flash memory, 4 KB RAM, and a 20 MHz maximum CPU clock. It integrates 10-bit ADC (8 channels), UART, I²C, and 16-bit timer arrays, and operates across industrial temperature range (−40°C to +85°C) with supply voltage 2.7–5.5 V. It is used in motor control subsystems for HVAC blowers and appliance pump drivers.
For engineers reviewing the UPD78F0535AFC-AA1-A datasheet, UPD78F0535AFC-AA1-A pinout, UPD78F0535AFC-AA1-A application, or UPD78F0535AFC-AA1-A equivalent, key selection criteria include flash endurance (100,000 erase/write cycles), ADC conversion time (1.2 μs typical), interrupt latency (2.5 μs min), and support for on-chip self-programming library v1.0.
Technical Context
The UPD78F0535AFC-AA1-A implements the 78K0 CPU core with 16-bit address bus and Harvard architecture, supporting 131 instructions including bit manipulation and multiplication. Its peripheral set includes three 16-bit timer arrays (each with capture/compare/PWM output), a serial array unit (SAU) configurable as UART/I²C/SPI, and a 10-bit successive-approximation ADC with internal reference and sample-and-hold.
It uses a single-phase external crystal (X1) or ceramic resonator (1–20 MHz) for main system clock, with optional PLL for internal clock multiplication. Power management includes HALT and STOP modes with wake-up via external interrupt or timer event, achieving 1.2 μA standby current at VDD = 3.3 V.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | 78K0 8-bit CISC core, 20 MHz max operation, 131 instructions |
| Flash Memory | 64 KB on-chip, 100,000 erase/write cycles, 10-year data retention |
| RAM | 4 KB on-chip SRAM, byte/word accessible, no wait states up to 20 MHz |
| ADC | 10-bit SAR, 8-channel input, 1.2 μs conversion time, internal 2.5 V reference |
| Timers | Three 16-bit timer arrays (TAU), each with 4 channels, PWM output resolution down to 12.5 ns |
| Communication | SAU supports UART (asynchronous), I²C (master/slave), and CSI (synchronous) |
| Supply Voltage | 2.7–5.5 V DC, operates over full industrial temperature range (−40°C to +85°C) |
Pinout & Package
UPD78F0535AFC-AA1-A is housed in a 100-pin LQFP (14 mm × 14 mm, 0.5 mm pitch) package with exposed thermal pad. Pin functions are defined per Renesas Hardware User's Manual Rev.4.01, Section 2.1.4 (78K0/KE2).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P00–P06 | Port 0 bidirectional I/O | Configurable as general-purpose I/O or alternate functions (e.g., TAU0 channel outputs, UART0 TX/RX) |
| P10–P17 | Port 1 bidirectional I/O | Supports external interrupt inputs (INT0–INT7), ADC trigger inputs, and SAU clock sources |
| P20–P27 | Port 2 bidirectional I/O | Includes ADC analog inputs (AN0–AN7), comparator inputs, and reset-injection pins |
| RESET | Active-low reset input | Asynchronous reset with internal pull-up; accepts external reset pulse ≥100 ns width |
| VDD / VSS | Power supply / ground | Dual power domains: VDD/EVDD (digital/analog), VSS/EVSS (digital/analog); separate decoupling required |
Key Features
| Feature | Design Value |
|---|---|
| On-chip flash programming | Self-programming library enables in-application firmware updates without external programmer |
| ADC accuracy | ±2 LSB INL/DNL over full temperature range, enabling closed-loop sensor feedback without calibration |
| PWM timing precision | 16-bit timer arrays support 0.1% duty cycle resolution at 20 kHz carrier frequency |
| Low-power operation | STOP mode draws 1.2 μA (typ.) at 3.3 V; wake-up latency < 5 μs from external interrupt |
| Hardware safety features | Watchdog timer with independent clock source, illegal opcode detection, and stack overflow protection |
Applications
| Motor Control Subsystem | Industrial Sensor Node |
|---|---|
Use Scenario: Speed-regulated blower control in commercial HVAC units using hall-effect rotor position feedback. IC Role / Device Role / Timing Role: Main controller executing PID loop at 10 kHz, generating complementary PWM for 3-phase inverter gate drivers. Use Value: Integrated TAU timers deliver precise dead-time insertion and phase-shifted PWM outputs, eliminating external timing ICs. | Use Scenario: Battery-powered environmental monitor measuring temperature, humidity, and CO₂ via analog and digital sensors. IC Role / Device Role / Timing Role: Data acquisition hub with synchronized ADC sampling and low-power sleep/wake scheduling. Use Value: 10-bit ADC with internal reference and 1.2 μs conversion enables 100-sample/sec throughput while maintaining <1.5 mW active power. |
| Smart Appliance Pump Driver | Factory Automation I/O Module |
Use Scenario: Variable-speed water pump in dishwasher with pressure sensing and flow rate regulation. IC Role / Device Role / Timing Role: Real-time actuator controller interfacing with pressure transducer, solenoid valves, and brushless DC motor driver. Use Value: SAU configured as UART handles communication with main MCU; integrated 16-bit timers manage pump RPM via PWM duty cycle modulation. | Use Scenario: DIN-rail mounted I/O expansion module converting fieldbus signals (Modbus RTU) to local digital inputs/outputs. IC Role / Device Role / Timing Role: Protocol bridge and GPIO manager with deterministic response to Modbus polling requests. Use Value: On-chip flash supports field-upgradable protocol stack; hardware UART with automatic baud-rate detection reduces host-side configuration overhead. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 8-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F100LEAFB#30 | RL78/G13 core, 64 KB flash, 4 KB RAM, but 32-pin HWQFN vs. 100-pin LQFP; lacks SAU-based I²C master mode | Suitable for space-constrained designs where UART-only comms suffices; not drop-in due to pin count and peripheral mapping mismatch | Select if board area is critical and I²C master functionality is unused; verify ADC channel routing and timer resource allocation |
| STM8S208MBT6 | 24 MHz max clock, 128 KB flash, 6 KB RAM, but 8-bit ST core; ADC conversion time 2.1 μs, no on-chip self-programming library | Better flash density and higher clock speed, but requires external bootloader for firmware updates and lacks integrated safety watchdog features | Choose when higher code density or faster execution is prioritized over certified in-field update capability and built-in safety monitoring |
Compared with UPD78F0535AFC-AA1-A, R5F100LEAFB#30 offers smaller footprint but reduced peripheral flexibility, while STM8S208MBT6 delivers greater memory headroom at the cost of increased firmware development complexity for secure field updates.
Availability
UPD78F0535AFC-AA1-A is available at Aetrix Electronics and suitable for motor control subsystems, industrial sensor nodes, smart appliance pump drivers, and factory automation I/O modules requiring stable component supply and long-term lifecycle support.
Supply support for UPD78F0535AFC-AA1-A includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a Japanese semiconductor manufacturer specializing in microcontrollers, analog, power, and SoC solutions for industrial, automotive, and infrastructure markets.
The 78K0/KE2 product line was designed for cost-sensitive, high-reliability embedded control applications requiring deterministic real-time performance, integrated analog peripherals, and robust flash endurance-particularly in white goods and industrial equipment.
FAQ
What is the maximum operating frequency and corresponding instruction cycle time for the UPD78F0535AFC-AA1-A?
The UPD78F0535AFC-AA1-A supports a maximum CPU clock frequency of 20 MHz, resulting in a minimum instruction cycle time of 50 ns for most instructions. This timing assumes use of the on-chip oscillator with external crystal (X1) or ceramic resonator, and accounts for internal clock division settings per the system clock control register (CKC). The UPD78F0535AFC-AA1-A achieves this performance across its full industrial temperature range (−40°C to +85°C) with supply voltage between 2.7 V and 5.5 V.
Does the UPD78F0535AFC-AA1-A support in-system programming (ISP) without external hardware tools?
Yes, the UPD78F0535AFC-AA1-A supports in-application programming via its on-chip self-programming library (SPL) Type 01, allowing firmware updates through UART or other serial interfaces without requiring external programmers like PG-FP5. The SPL provides verified routines for flash erase, write, and verification, with interrupt-safe operation and checksum validation. This capability is integral to the UPD78F0535AFC-AA1-A design and does not depend on external debug hardware.
What are the ADC input voltage range and reference options for the UPD78F0535AFC-AA1-A?
The UPD78F0535AFC-AA1-A ADC accepts analog inputs from AVSS to AVREF, with AVREF configurable as either internal 2.5 V reference or externally supplied voltage (up to VDD). The input range is rail-to-rail relative to the selected reference, and the 10-bit conversion result is right-aligned in the ADRES register. Input channels AN0–AN7 are mapped to P20–P27, and the ADC supports software/start-triggered conversions with programmable sample-and-hold time.
How many independent PWM outputs can the UPD78F0535AFC-AA1-A generate simultaneously?
The UPD78F0535AFC-AA1-A can generate up to 12 independent PWM outputs simultaneously using its three 16-bit timer array units (TAU0, TAU1, TAU2), each providing four output channels. Each channel supports complementary PWM with programmable dead-time insertion, center-aligned or edge-aligned modes, and synchronous start/stop control. These capabilities are implemented in hardware and do not require CPU intervention during waveform generation, making them suitable for motor drive applications.
Is the UPD78F0535AFC-AA1-A qualified for automotive applications?
No, the UPD78F0535AFC-AA1-A is rated for Standard quality grade per Renesas documentation, intended for industrial, office, and consumer applications such as HVAC systems, appliances, and test equipment. It is not qualified to AEC-Q100 or designated for automotive use. For automotive-grade alternatives, Renesas offers the RL78/F1x or RH850 families, which include extended temperature range, enhanced ESD immunity, and automotive-specific qualification testing not present in the UPD78F0535AFC-AA1-A.
UPD78F0535AFC-AA1-A Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 64-VFLGA
- Series:
- 78K0/Kx2
- Packaging:
- Bulk
- Product Status:
- Active
- Programmable:
- Not Verified
- Core Processor:
- 78K/0
- Core Size:
- 8-Bit
- Speed:
- 20MHz
- Connectivity:
- 3-Wire SIO, I2C, LINbus, UART/USART
- Peripherals:
- LVD, POR, PWM, WDT
- Number of I/O:
- 55
- Program Memory Size:
- 60KB (60K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 3K x 8
- Voltage - Supply (Vcc/Vdd):
- 1.8V ~ 5.5V
- Data Converters:
- A/D 8x10b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
UPD78F0535AFC-AA1-A FAQ
1.How can I place an order for UPD78F0535AFC-AA1-A through Aetrix?
Please submit a Request for Quotation (RFQ) for UPD78F0535AFC-AA1-A on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for UPD78F0535AFC-AA1-A reliable?
The price and inventory of UPD78F0535AFC-AA1-A are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for UPD78F0535AFC-AA1-A is usually 5 days.
3.What payment methods are accepted for UPD78F0535AFC-AA1-A?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for UPD78F0535AFC-AA1-A transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for UPD78F0535AFC-AA1-A?
UPD78F0535AFC-AA1-A orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your UPD78F0535AFC-AA1-A order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for UPD78F0535AFC-AA1-A?
For technical support, including UPD78F0535AFC-AA1-A datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your UPD78F0535AFC-AA1-A requirements.
6.How does Aetrix verify that UPD78F0535AFC-AA1-A is sourced from the original manufacturer or authorized distributors?
All UPD78F0535AFC-AA1-A products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that UPD78F0535AFC-AA1-A meets industry standards.
7.What is the process for return or replacement of UPD78F0535AFC-AA1-A?
All UPD78F0535AFC-AA1-A units undergo pre-shipment inspection (PSI). If there is an issue with UPD78F0535AFC-AA1-A, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The UPD78F0535AFC-AA1-A part is unused and in its original packaging.
Return procedure for UPD78F0535AFC-AA1-A:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
UPD78F0535AFC-AA1-A Tags

-
ATTINY4-TSHR
Microchip Technology

-
ATTINY10-TSHR
Microchip Technology

-
ATTINY10-TS8R
Microchip Technology

-
ATTINY202-SSNR
Microchip Technology

-
ATTINY202-SSFR
Microchip Technology

-
ATTINY402-SSNR
Microchip Technology

-
PIC16F15213T-I/MF
Microchip Technology

-
PIC16F15213-E/MF
Microchip Technology

-
PIC10F200T-I/OT
Microchip Technology

-
ATTINY412-SSNR
Microchip Technology

-
PIC10F202T-I/OT
Microchip Technology

-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…

