My Inquiry
My Account
Renesas UPD78F0887AGKA-GAJ-G
- Part No.:
- UPD78F0887AGKA-GAJ-G
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 64-LQFP
- Datasheet:
-
UPD78F0887AGKA-GAJ-G.pdf
- Description:
- IC MCU 8BIT 48KB FLASH 64LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,193
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
UPD78F0887AGKA-GAJ-G from Renesas Electronics is an 8-bit single-chip microcontroller in the 78K0/Fx2-L family, featuring 128 KB Flash memory, 8 KB RAM, and a 20 MHz max CPU clock. It integrates UART, I²C, 16-bit timer/counters, ADC (10-bit, 12-channel), and on-chip voltage regulator (REGC). It targets industrial control and sensor interface applications requiring low-power operation and robust peripheral integration.
For engineers reviewing the UPD78F0887AGKA-GAJ-G datasheet, UPD78F0887AGKA-GAJ-G pinout, UPD78F0887AGKA-GAJ-G application, or UPD78F0887AGKA-GAJ-G equivalent, key selection criteria include its 30-pin LQFP package, internal high-/low-speed oscillators, Flash self-programming capability, and support for both standard and high-quality grade applications per Renesas classification.
Technical Context
The UPD78F0887AGKA-GAJ-G implements the 78K0 CPU core with 16-bit addressing, supporting up to 1 MB linear address space via bank switching. Its clock system includes three independent oscillators - external crystal (X1), internal high-speed (16 MHz), and internal low-speed (15 kHz) - selectable via software-controlled registers with automatic fail-safe switching.
Peripheral integration follows the 78K0/Fx2-L architecture: 12-channel 10-bit ADC with sample-and-hold, dual UARTs with LIN support, I²C master/slave mode, and six 16-bit timer/counters with capture/compare/PWM output. All peripherals are memory-mapped and controlled via dedicated SFRs with interrupt vectoring.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| CPU Core | 78K0 8-bit CISC core with 16-bit addressing and 1 MB bank-switched memory space |
| Flash Memory | 128 KB on-chip Flash with 100,000 write/erase cycles and self-programming capability |
| RAM | 8 KB on-chip RAM with retention during STOP mode |
| Max Clock Frequency | 20 MHz system clock (via PLL or external oscillator); supports 1.8–5.5 V operation |
| ADC | 10-bit successive-approximation ADC with 12 input channels and hardware-triggered sampling |
| Timers | Six 16-bit timers: two with PWM output, two with input capture, two with interval timing and real-time clock support |
| Communication | Dual UART (one with LIN bus support), I²C master/slave, and CSI synchronous serial interface |
Pinout & Package
This device uses a 30-pin LQFP (7 × 7 mm, 0.5 mm pitch) package with exposed thermal pad. Pin functions are defined per Renesas 78K0/Fx2-L specification for FB2-L subgroup.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, VSS | Power supply and ground | Dual power domains: VDD (1.8–5.5 V) powers digital logic; AVDD/AVSS (2.7–5.5 V) powers analog peripherals including ADC |
| P00–P02 | Port 0 pins | Bi-directional CMOS I/O with pull-up option; P00/P01 serve as X1/X2 crystal oscillator inputs when enabled |
| P20–P27 | Port 2 pins | General-purpose I/O with alternate functions including UART0 TX/RX, I²C SCL/SDA, and timer outputs |
| P30–P37 | Port 3 pins | ADC input channels AN0–AN7; also support comparator and analog reference functions |
| P60, P61 | Port 6 pins | UART1 TX/RX with LIN modulation capability; P61 supports programmable slew rate control |
| RESET | Active-low reset input | Asynchronous reset with internal pull-up; accepts external reset signal or watchdog timeout assertion |
| REGC | On-chip voltage regulator control | Enables internal 3.3 V regulator for VDD supply; requires external 4.5–5.5 V input on REGC pin |
Key Features
| Feature | Design Value |
|---|---|
| Flash self-programming | Enables firmware updates in-system without external programmer; supports block erase and byte write |
| Low-power modes | HALT, STOP, and SNOOZE modes with sub-μA current draw; wake-up via external interrupt or RTC alarm |
| ADC with hardware trigger | Supports auto-triggering from timer overflow or external event, eliminating CPU polling overhead |
| Integrated LIN transceiver support | UART1 with built-in LIN physical layer modulation/demodulation compliant with LIN 2.1/2.2 |
| On-chip voltage regulator | REGC pin controls internal 3.3 V regulator, reducing need for external LDO in cost-sensitive designs |
Applications
| Industrial Sensor Node | Smart HVAC Controller |
|---|---|
Use Scenario: Standalone temperature/humidity/pressure sensing node with local display and wireless uplink. IC Role / Device Role / Timing Role: Main controller managing sensor acquisition, data preprocessing, display interface, and communication protocol stack. Use Value: Integrated 12-channel ADC, dual UARTs (one for display, one for wireless module), and low-power STOP mode extend battery life beyond 2 years on coin cell. | Use Scenario: Wall-mounted thermostat with fan speed control, occupancy detection, and remote setpoint adjustment. IC Role / Device Role / Timing Role: Real-time environmental manager coordinating sensor reads, PWM fan drive, and LIN bus communication to HVAC main unit. Use Value: On-chip LIN support eliminates external transceiver; 16-bit timers provide precise 25 kHz PWM for brushless fan control. |
| Programmable Logic Relay | Factory Floor I/O Module |
Use Scenario: DIN-rail mounted relay controller accepting digital inputs, executing ladder logic, and driving solid-state relays. IC Role / Device Role / Timing Role: Deterministic real-time executor of user-defined logic with cycle time under 1 ms. Use Value: 128 KB Flash stores complex logic programs; hardware-based interrupt priority ensures timely response to emergency stop signals. | Use Scenario: Modular I/O expansion unit connecting to PLC backplane via RS-485, aggregating 16 digital inputs and 8 outputs. IC Role / Device Role / Timing Role: Protocol bridge and local I/O manager handling bit-level read/write and status reporting. Use Value: Dual UARTs enable simultaneous RS-485 master communication and debug port; 30-pin LQFP allows compact PCB layout with full I/O routing. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 8-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F104PJAFB#30 | RL78/G13-based; 32 KB Flash, 4 KB RAM, lower power but no on-chip REGC | Lacks integrated voltage regulator; requires external 3.3 V supply; better suited for ultra-low-power battery apps | Select when power budget is tighter than board space, and external LDO is acceptable |
| UPD78F0735GC-UBA-A | Same 78K0/Fx2-L family; 64 KB Flash, 4 KB RAM, 24-pin QFN package | Fewer I/O and peripherals; no LIN support; smaller footprint but reduced scalability | Select for cost-constrained, space-limited designs where full 128 KB Flash and LIN are unnecessary |
Compared with R5F104PJAFB#30 and UPD78F0735GC-UBA-A, the UPD78F0887AGKA-GAJ-G provides the highest Flash/RAM capacity and integrated LIN+REGC in the 30-pin LQFP form factor, making it optimal for feature-rich industrial controllers requiring field firmware updates and analog sensor fusion.
Availability
UPD78F0887AGKA-GAJ-G is available at Aetrix Electronics and suitable for industrial automation, building management systems, and embedded sensor nodes requiring stable component supply across multi-year production cycles.
Supply support for UPD78F0887AGKA-GAJ-G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a Japanese semiconductor manufacturer specializing in microcontrollers, analog, power, and SoC solutions for industrial, automotive, and infrastructure markets.
The 78K0/Fx2-L product line delivers cost-optimized 8-bit MCUs with enhanced analog integration and LIN-ready communication for industrial control and sensor-edge applications.
FAQ
What is the maximum operating frequency of the UPD78F0887AGKA-GAJ-G?
The UPD78F0887AGKA-GAJ-G supports a maximum system clock frequency of 20 MHz. This can be achieved using the on-chip PLL with an external crystal (X1) or internal high-speed oscillator as source. The CPU executes instructions at this frequency, and all peripherals-including ADC sampling and UART baud generation-are synchronized to this clock domain unless prescaled.
Does the UPD78F0887AGKA-GAJ-G include an integrated voltage regulator?
Yes, the UPD78F0887AGKA-GAJ-G features an on-chip voltage regulator controlled via the REGC pin. When enabled, it generates a regulated 3.3 V supply from an external 4.5–5.5 V input applied to REGC, powering the internal VDD domain. This eliminates the need for an external LDO in many industrial designs, simplifying BOM and reducing board area.
Which communication interfaces does the UPD78F0887AGKA-GAJ-G support?
The UPD78F0887AGKA-GAJ-G supports UART (two channels, with UART1 offering LIN 2.1/2.2 physical layer modulation), I²C (master/slave mode), and CSI (synchronous serial interface). It does not include SPI or CAN. UART0 and UART1 are independently configurable with separate baud rate generators and interrupt vectors, enabling concurrent use for debugging and fieldbus communication.
How much Flash and RAM does the UPD78F0887AGKA-GAJ-G have?
The UPD78F0887AGKA-GAJ-G integrates 128 KB of on-chip Flash memory and 8 KB of RAM. Flash endurance is rated for 100,000 write/erase cycles and supports in-application programming (IAP) via the built-in Flash control module. RAM retains data during STOP mode when powered, enabling fast wake-up with preserved context.
Is the UPD78F0887AGKA-GAJ-G qualified for automotive applications?
No, the UPD78F0887AGKA-GAJ-G is classified by Renesas as a "Standard" quality grade device, intended for industrial, office, and consumer equipment-not transportation or safety-critical systems. It is not AEC-Q100 qualified. For automotive use, Renesas recommends RL78/F1x or RH850 families, which meet AEC-Q100 Grade 2/3 requirements and include extended temperature range and fault-tolerant features.
UPD78F0887AGKA-GAJ-G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 64-LQFP
- Series:
- 78K0/Fx2
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Core Processor:
- 78K/0
- Core Size:
- 8-Bit
- Speed:
- 20MHz
- Connectivity:
- 3-Wire SIO, CANbus, I2C, LINbus, UART/USART
- Peripherals:
- LVD, POR, PWM, WDT
- Number of I/O:
- 55
- Program Memory Size:
- 48KB (48K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 2K x 8
- Voltage - Supply (Vcc/Vdd):
- 5V
- Data Converters:
- A/D 12x10b
- Oscillator Type:
- -
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
UPD78F0887AGKA-GAJ-G FAQ
1.How can I place an order for UPD78F0887AGKA-GAJ-G through Aetrix?
Please submit a Request for Quotation (RFQ) for UPD78F0887AGKA-GAJ-G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for UPD78F0887AGKA-GAJ-G reliable?
The price and inventory of UPD78F0887AGKA-GAJ-G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for UPD78F0887AGKA-GAJ-G is usually 5 days.
3.What payment methods are accepted for UPD78F0887AGKA-GAJ-G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for UPD78F0887AGKA-GAJ-G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for UPD78F0887AGKA-GAJ-G?
UPD78F0887AGKA-GAJ-G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your UPD78F0887AGKA-GAJ-G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for UPD78F0887AGKA-GAJ-G?
For technical support, including UPD78F0887AGKA-GAJ-G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your UPD78F0887AGKA-GAJ-G requirements.
6.How does Aetrix verify that UPD78F0887AGKA-GAJ-G is sourced from the original manufacturer or authorized distributors?
All UPD78F0887AGKA-GAJ-G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that UPD78F0887AGKA-GAJ-G meets industry standards.
7.What is the process for return or replacement of UPD78F0887AGKA-GAJ-G?
All UPD78F0887AGKA-GAJ-G units undergo pre-shipment inspection (PSI). If there is an issue with UPD78F0887AGKA-GAJ-G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The UPD78F0887AGKA-GAJ-G part is unused and in its original packaging.
Return procedure for UPD78F0887AGKA-GAJ-G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
UPD78F0887AGKA-GAJ-G Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
