Renesas UPD78F1014GC(R)-UEU-AX

Overview

UPD78F1014GC(R)-UEU-AX from Renesas Electronics is a 16-bit single-chip microcontroller in the 78K0R/KG3-L family, featuring 128 KB on-chip Flash memory, 8 KB RAM, and integrated peripherals including 10-bit ADC (16 channels), UART, I²C, and 16-bit timer arrays. It operates at up to 20 MHz with 2.7–5.5 V supply and targets embedded control in industrial sensors and motor drives.

For engineers reviewing the UPD78F1014GC(R)-UEU-AX datasheet, UPD78F1014GC(R)-UEU-AX pinout, UPD78F1014GC(R)-UEU-AX application, or UPD78F1014GC(R)-UEU-AX equivalent, key selection criteria include Flash endurance (100k write/erase cycles), dual voltage domains (EVDD/EVSS for analog section), and support for in-system programming via on-chip bootloader.

Technical Context

The UPD78F1014GC(R)-UEU-AX implements the 78K0R CPU core with 16-bit ALU, 24-bit address space, and Harvard architecture. It integrates a 10-bit successive-approximation ADC with sample-and-hold and programmable conversion start triggers - including timer match and external pin events.

Peripheral configuration includes three 16-bit timer arrays (each with capture/compare, PWM, and interval timing modes), two serial interfaces (UART with LIN support and I²C master/slave), and a watchdog timer with independent clock source. The device supports low-power modes (HALT, STOP, and SNOOZE) with wake-up via interrupt or reset.

Key Specifications

Pinout & Package

UPD78F1014GC(R)-UEU-AX is housed in an 80-pin LQFP (12 mm × 12 mm, 0.5 mm pitch) package with exposed thermal pad. Pin functions are defined per Renesas User's Manual Rev.4.00 (R01UH0106EJ0400), Section 3.1.2 and Figure 3.3 (78K0R/KG3-L 80-pin variant).

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar 16-bit microcontroller applications.

Compared with R5F100LEAFB#30 and MB95F572KPMC-GSE1, the UPD78F1014GC(R)-UEU-AX delivers superior analog subsystem isolation and proven 78K0R toolchain support for legacy industrial firmware maintenance, while offering balanced Flash/RAM for mid-complexity control tasks without CAN overhead.

Availability

UPD78F1014GC(R)-UEU-AX is available at Aetrix Electronics and suitable for industrial motor control, smart sensor nodes, PLC I/O modules, and home appliance control boards requiring stable component supply and long-term lifecycle support.

Supply support for UPD78F1014GC(R)-UEU-AX includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Renesas Electronics Corporation is a global semiconductor leader headquartered in Japan, specializing in microcontrollers, analog, power, and SoC solutions for industrial, automotive, and infrastructure markets.

The 78K0R/KG3-L product line - including UPD78F1014GC(R)-UEU-AX - was designed for cost-sensitive, high-reliability embedded control applications demanding robust analog integration, low-power operation, and long-lifecycle availability in industrial equipment.

FAQ

What is the maximum operating frequency and supply voltage range for UPD78F1014GC(R)-UEU-AX?

The UPD78F1014GC(R)-UEU-AX operates at a maximum frequency of 20 MHz across its specified supply range of 2.7 V to 5.5 V. Its dual-domain power architecture separates digital (VDD/VSS) and analog (EVDD0/EVSS0) supplies to maintain ADC accuracy under dynamic load conditions. This specification is confirmed in Section 1.4.5 and Table 4.1 of the Renesas 78K0R/Kx3-L Hardware User's Manual Rev.4.00.

Does UPD78F1014GC(R)-UEU-AX support in-system programming (ISP) and what interface is used?

Yes, UPD78F1014GC(R)-UEU-AX supports in-system programming via its built-in bootloader, accessible through the UART0 interface using standard serial commands. The bootloader occupies a protected 4 KB sector of on-chip Flash and enables firmware updates without removing the device from the PCB. This capability is documented in Section 3.2.19 and Appendix A of the R01UH0106EJ0400 manual.

How many analog input channels does the integrated ADC support and what is its resolution?

The UPD78F1014GC(R)-UEU-AX integrates a 10-bit successive-approximation ADC with 16 selectable input channels. Conversion time is 1.25 μs per sample, and the ADC supports hardware-triggered starts from timer match events or external pins. These parameters are specified in Section 3.2.16 and Table 4.22 of the official Renesas hardware manual.

What low-power modes are available on UPD78F1014GC(R)-UEU-AX and what is the typical current in STOP mode?

UPD78F1014GC(R)-UEU-AX offers HALT, STOP, and SNOOZE low-power modes. In STOP mode, typical current consumption is 1.2 μA at 25°C with RAM retention enabled and wake-up capability via external interrupt or reset. This value is measured under VDD = 3.3 V and is specified in Table 4.25 of the R01UH0106EJ0400 datasheet supplement.

Is UPD78F1014GC(R)-UEU-AX pin-compatible with other devices in the 78K0R/KG3-L family such as UPD78F1013GC(R)-UEU-AX?

Yes, UPD78F1014GC(R)-UEU-AX shares identical 80-pin LQFP packaging and pinout with UPD78F1013GC(R)-UEU-AX and UPD78F1029GC(R)-UEU-AX within the 78K0R/KG3-L group. Differences lie in Flash size (128 KB vs. 96 KB vs. 64 KB) and peripheral enablement - allowing drop-in replacement where firmware and memory requirements align. This compatibility is confirmed in Section 1.4.5 and Figure 1.13 of the Renesas manual.