Renesas UPD78F1152AGK-GAK-AX
- Part No.:
- UPD78F1152AGK-GAK-AX
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 80-LQFP
- Datasheet:
-
UPD78F1152AGK-GAK-AX.pdf
- Description:
- IC MCU 16BIT 64KB FLASH 80LQFP
- Quantity:
- Payment:

- Shipping:

Inventory:1,126
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
UPD78F1152AGK-GAK-AX from Renesas Electronics is a 16-bit single-chip microcontroller in the 78K0R/KE3 family, featuring 128 KB on-chip Flash memory, 8 KB RAM, and integrated peripherals including 10-bit ADC (16 channels), UART, I²C, and 16-bit timer arrays. It operates at up to 20 MHz with supply voltage range of 2.7 V to 5.5 V and targets embedded control in industrial HMI and sensor interface modules.
For engineers reviewing the UPD78F1152AGK-GAK-AX datasheet, UPD78F1152AGK-GAK-AX pinout, UPD78F1152AGK-GAK-AX application, or UPD78F1152AGK-GAK-AX equivalent, key selection criteria include Flash endurance (100,000 erase/write cycles), operating temperature range (−40°C to +85°C), and support for on-chip debug via single-wire interface - all critical for cost-sensitive, long-lifecycle industrial firmware deployments.
Technical Context
The UPD78F1152AGK-GAK-AX implements the 78K0R CPU core with 16-bit ALU, 24-bit address space, and Harvard architecture separating program and data memory. It integrates a programmable low-voltage detection circuit (LVD) with 3 selectable thresholds (2.7 V, 3.3 V, 4.2 V) and supports multiple clock sources: internal high-speed oscillator (20 MHz), internal low-speed oscillator (15 kHz), and external crystal (up to 20 MHz).
Peripheral configuration includes 80 I/O pins across 11 ports (P0–P7, P12–P14), with port functions configurable per pin (e.g., P00–P06 as general I/O or UART/ADC inputs). The device uses SuperFlash® technology licensed from SST for its Flash memory, enabling fast erase (≤100 ms per block) and single-cycle read access at maximum frequency.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | 78K0R 16-bit CPU with 24-bit addressing and 1.8 DMIPS/MHz performance |
| Program Memory | 128 KB on-chip Flash (SuperFlash®), 100,000 erase/write cycles, 10-year data retention |
| Data Memory | 8 KB RAM with software-controlled wait states for zero-wait operation up to 20 MHz |
| ADC | 10-bit successive approximation ADC with 16 input channels, ±1 LSB INL, conversion time ≤1.2 μs |
| Operating Voltage | 2.7 V to 5.5 V - enables direct interface with 3.3 V and 5 V logic without level shifters |
| Temperature Range | −40°C to +85°C (Industrial grade) - validated for continuous operation in uncontrolled ambient environments |
| Debug Interface | Single-wire on-chip debug (OCDS) supporting breakpoint, watchpoint, and real-time trace without dedicated debug pins |
Pinout & Package
UPD78F1152AGK-GAK-AX is housed in a 100-pin LQFP package (14 mm × 14 mm, 0.5 mm pitch) with exposed thermal pad. Pin assignment follows Renesas' standard 78K0R/KE3 layout, optimized for noise immunity and mixed-signal routing.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD / EVDD | Power supply (core & I/O) | Dual-supply pins enable independent decoupling for analog/digital domains; EVDD powers ADC and I/O buffers |
| VSS / EVSS | GND reference (core & I/O) | Separate ground returns reduce coupling between digital switching noise and analog measurement paths |
| RESET | Active-low reset input | Asynchronous reset with internal pull-up; accepts external reset IC or RC network for power-on and brownout recovery |
| FLMD0 | Flash mode select | Configures boot mode at power-up: high = normal operation, low = Flash programming mode via on-chip bootloader |
| AVREF | Analog reference voltage input | Accepts external reference (1.5 V to VDD) or internal 2.5 V bandgap reference for ADC full-scale calibration |
| P00–P06 | Port 0 bidirectional I/O | Configurable as general-purpose I/O or alternate functions (UART0 TX/RX, ADC0–6); each pin has individual pull-up control |
| P120–P124 | Port 12 analog input | Dedicated ADC input group (AN120–AN124) with shared sample-and-hold; supports simultaneous sampling across 5 channels |
Key Features
| Feature | Design Value |
|---|---|
| On-chip Flash with ECC | 128 KB Flash includes single-bit error correction and double-bit error detection - prevents silent data corruption during field operation |
| Low-power modes | Four modes (HALT, STOP, SNOOZE, IDLE) with wake-up latency ≤2 μs from HALT - extends battery life in sensor nodes |
| Hardware multiplier/divider | 16×16-bit multiply (1 cycle) and 32÷16-bit divide (17 cycles) accelerate motor control and PID loop execution |
| Watchdog timer (WDT) | Dedicated independent WDT with windowed operation and separate clock source - prevents runaway code without CPU intervention |
| Real-time clock (RTC) | Integrated RTC with 32.768 kHz crystal support and calendar function (year/month/day/hour/min/sec) - eliminates external RTC IC |
| GPIO interrupt capability | All 80 I/O pins support edge-triggered interrupts with priority arbitration - enables responsive button/keypad scanning without polling |
Applications
| Industrial HMI Panels | Sensor Signal Conditioning Units |
|---|---|
Use Scenario: Standalone touch-enabled operator interface for PLC-connected machinery with local data logging. IC Role / Device Role / Timing Role: Main controller executing GUI rendering, serial protocol translation (Modbus RTU over UART), and non-volatile parameter storage. Use Value: 128 KB Flash accommodates dual-application firmware images for A/B update schemes; 10-bit ADC directly digitizes potentiometer and thermistor inputs without external signal conditioning. |
Use Scenario: Multi-sensor node aggregating temperature, humidity, and pressure readings for HVAC monitoring. IC Role / Device Role / Timing Role: Sensor hub performing analog front-end acquisition, linearization, and packetized wireless transmission via UART-to-LoRa bridge. Use Value: Simultaneous 5-channel sampling on Port 12 enables synchronized capture across sensors; low-power STOP mode reduces average current to 1.2 μA during sleep intervals. |
| Smart Power Meters | Factory Automation I/O Modules |
Use Scenario: DIN-rail mounted electricity meter measuring voltage/current harmonics and energy consumption per tariff period. IC Role / Device Role / Timing Role: Metering co-processor handling metrology calculations, tamper detection, and secure firmware updates via SPI flash. Use Value: Hardware multiplier accelerates RMS and FFT computations; LVD with 2.7 V threshold ensures reliable shutdown before EEPROM write corruption during brownout. |
Use Scenario: Modular digital I/O expansion unit for CNC controllers, accepting 24 V DC inputs and driving relay outputs. IC Role / Device Role / Timing Role: Isolation interface controller managing optocoupler input sampling, watchdog supervision, and CAN bus communication to host PLC. Use Value: 80 GPIO pins support 32-channel discrete I/O with per-pin interrupt masking; UART with automatic baud rate detection simplifies commissioning across legacy fieldbus gateways. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F100LGSP | Same 78K0R core but 96 KB Flash, no hardware divider, 64-pin LQFP | Limited peripheral count and smaller memory - suitable for simpler I/O concentrators without complex math | Select when BOM cost reduction outweighs need for ADC channel count and computational headroom |
| MB95560P | Fujitsu FM3-based 32-bit ARM Cortex-M0+, 256 KB Flash, 32 KB RAM, higher power consumption | Requires ARM toolchain and lacks native 78K0R peripheral register compatibility | Choose for future-proofing where C++/RTOS adoption and higher throughput justify migration effort and cost increase |
Compared with R5F100LGSP and MB95560P, the UPD78F1152AGK-GAK-AX delivers optimal balance of Flash density, analog integration, and deterministic real-time response for industrial control - avoiding both resource constraints of smaller 78K0R variants and unnecessary complexity of 32-bit alternatives.
Availability
UPD78F1152AGK-GAK-AX is available at Aetrix Electronics and suitable for industrial HMI panels, sensor signal conditioning units, smart power meters, and factory automation I/O modules requiring stable component supply across multi-year production cycles.
Supply support for UPD78F1152AGK-GAK-AX includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader specializing in microcontrollers, analog, power, and SoC solutions for automotive, industrial, and IoT markets.
The UPD78F1152AGK-GAK-AX belongs to the 78K0R/KE3 product line, designed specifically for cost-sensitive, high-reliability industrial control applications demanding robust analog integration and long-term supply stability without sacrificing real-time determinism.
FAQ
What is the maximum operating frequency of the UPD78F1152AGK-GAK-AX?
The UPD78F1152AGK-GAK-AX operates at a maximum CPU frequency of 20 MHz using its internal high-speed oscillator or an external crystal. This frequency is fully supported across the entire specified voltage range (2.7 V to 5.5 V) and temperature range (−40°C to +85°C), with zero-wait-state execution enabled by its on-chip RAM and optimized bus architecture. The UPD78F1152AGK-GAK-AX maintains timing compliance without derating under worst-case conditions.
Does the UPD78F1152AGK-GAK-AX support in-system programming (ISP)?
Yes, the UPD78F1152AGK-GAK-AX supports in-system programming via its on-chip bootloader activated by pulling FLMD0 low at reset. Programming is performed through UART using Renesas' Flash Development Toolkit (FDT) or third-party tools compliant with the 78K0R serial programming protocol. The UPD78F1152AGK-GAK-AX requires no external programming hardware beyond a standard UART interface and supports field firmware updates without removing the device from the PCB.
What ADC resolution and channel count does the UPD78F1152AGK-GAK-AX provide?
The UPD78F1152AGK-GAK-AX integrates a 10-bit successive approximation ADC with 16 input channels, including dedicated pins on Port 12 (AN120–AN124) for simultaneous sampling. It achieves ±1 LSB integral nonlinearity and supports programmable sampling times (1.5 to 256 PCLK cycles) to optimize accuracy versus conversion speed. The UPD78F1152AGK-GAK-AX ADC operates independently of CPU activity, allowing background conversions with interrupt notification upon completion.
Is the UPD78F1152AGK-GAK-AX pin-compatible with other 78K0R/KE3 devices?
No, the UPD78F1152AGK-GAK-AX is not pin-compatible with lower-pin-count members of the 78K0R/KE3 family such as the 64-pin or 80-pin variants. Its 100-pin LQFP package and full 80 GPIO allocation reflect its position as a high-peripheral-count variant. However, it shares identical register mapping, instruction set, and peripheral IP blocks with other 100-pin KE3 devices like UPD78F1146AGK-GAK-AX, enabling firmware reuse across the same package footprint.
What debug capabilities does the UPD78F1152AGK-GAK-AX offer?
The UPD78F1152AGK-GAK-AX features Renesas' single-wire On-Chip Debug Support (OCDS), providing non-intrusive breakpoints, watchpoints, real-time variable monitoring, and trace buffer access using only one dedicated debug pin (BKGD). It supports full-speed debugging without halting peripherals, enabling accurate timing analysis of UART, timer, and ADC behavior. The UPD78F1152AGK-GAK-AX debug interface is compatible with Renesas E2 emulator and third-party JTAG/SWD adapters with OCDS firmware support.
UPD78F1152AGK-GAK-AX Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 80-LQFP
- Series:
- 78K0R/Kx3
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Core Processor:
- 78K/0R
- Core Size:
- 16-Bit
- Speed:
- 20MHz
- Connectivity:
- 3-Wire SIO, I2C, LINbus, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 65
- Program Memory Size:
- 64KB (64K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 4K x 8
- Voltage - Supply (Vcc/Vdd):
- 1.8V ~ 5.5V
- Data Converters:
- A/D 8x10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
UPD78F1152AGK-GAK-AX FAQ
1.How can I place an order for UPD78F1152AGK-GAK-AX through Aetrix?
Please submit a Request for Quotation (RFQ) for UPD78F1152AGK-GAK-AX on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for UPD78F1152AGK-GAK-AX reliable?
The price and inventory of UPD78F1152AGK-GAK-AX are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for UPD78F1152AGK-GAK-AX is usually 5 days.
3.What payment methods are accepted for UPD78F1152AGK-GAK-AX?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for UPD78F1152AGK-GAK-AX transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for UPD78F1152AGK-GAK-AX?
UPD78F1152AGK-GAK-AX orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your UPD78F1152AGK-GAK-AX order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for UPD78F1152AGK-GAK-AX?
For technical support, including UPD78F1152AGK-GAK-AX datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your UPD78F1152AGK-GAK-AX requirements.
6.How does Aetrix verify that UPD78F1152AGK-GAK-AX is sourced from the original manufacturer or authorized distributors?
All UPD78F1152AGK-GAK-AX products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that UPD78F1152AGK-GAK-AX meets industry standards.
7.What is the process for return or replacement of UPD78F1152AGK-GAK-AX?
All UPD78F1152AGK-GAK-AX units undergo pre-shipment inspection (PSI). If there is an issue with UPD78F1152AGK-GAK-AX, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The UPD78F1152AGK-GAK-AX part is unused and in its original packaging.
Return procedure for UPD78F1152AGK-GAK-AX:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
UPD78F1152AGK-GAK-AX Tags

-
ATTINY4-TSHR
Microchip Technology

-
ATTINY10-TSHR
Microchip Technology

-
ATTINY10-TS8R
Microchip Technology

-
ATTINY202-SSNR
Microchip Technology

-
ATTINY202-SSFR
Microchip Technology

-
ATTINY402-SSNR
Microchip Technology

-
PIC16F15213T-I/MF
Microchip Technology

-
PIC16F15213-E/MF
Microchip Technology

-
PIC10F200T-I/OT
Microchip Technology

-
ATTINY412-SSNR
Microchip Technology

-
PIC10F202T-I/OT
Microchip Technology

-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…

