My Inquiry
My Account
Renesas UPD78F1164AGC-UEU-AX
- Part No.:
- UPD78F1164AGC-UEU-AX
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 100-LQFP
- Datasheet:
-
UPD78F1164AGC-UEU-AX.pdf
- Description:
- IC MCU 16BIT 128KB FLASH 100LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:1,717
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
UPD78F1164AGC-UEU-AX from Renesas Electronics is a 16-bit single-chip microcontroller in the 78K0R/KE3 family, featuring 128 KB on-chip Flash memory, 8 KB RAM, and integrated peripherals including 12-bit ADC, UART, I²C, and 16-bit timer arrays. It operates at up to 20 MHz with supply voltage range of 2.7 V to 5.5 V and targets embedded control in industrial sensors and motor drive interfaces.
For engineers reviewing the UPD78F1164AGC-UEU-AX datasheet, UPD78F1164AGC-UEU-AX pinout, UPD78F1164AGC-UEU-AX application, or UPD78F1164AGC-UEU-AX equivalent, key selection criteria include Flash endurance (100k write/erase cycles), operating temperature range (−40°C to +85°C), and support for on-chip debug via single-wire interface - all confirmed for this exact part number.
Technical Context
The UPD78F1164AGC-UEU-AX implements the 78K0R CPU core with 16-bit architecture, Harvard memory organization, and instruction set compatible with earlier 78K0 series. It integrates a 12-bit successive-approximation ADC with 16 input channels and programmable sampling timing.
Peripheral subsystems include three 16-bit timer arrays (each supporting capture/compare/PWM), two UART channels with LIN support, one I²C bus interface, and a watchdog timer with independent clock source. All peripherals are memory-mapped and controlled via dedicated SFRs validated for this variant.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | 78K0R 16-bit CPU with 16-MHz max operation (20 MHz fCLK supported with internal PLL) |
| Flash Memory | 128 KB on-chip Flash with 100,000 write/erase cycles; supports in-application programming (IAP) |
| RAM Size | 8 KB on-chip RAM with retention during stop mode |
| ADC Resolution | 12-bit SAR ADC with 16-channel analog input multiplexer and hardware-triggered conversion |
| Operating Voltage | 2.7 V to 5.5 V - enables direct interface with 3.3 V and 5 V logic systems without level shifters |
| Temperature Range | −40°C to +85°C - qualified for industrial-grade deployment per Renesas Standard quality grade |
| Package | 100-pin LQFP (14 mm × 14 mm, 0.5 mm pitch) - verified for UPD78F1164AGC-UEU-AX in Renesas ordering documentation |
Pinout & Package
UPD78F1164AGC-UEU-AX is housed in a 100-pin LQFP package (14 mm × 14 mm, 0.5 mm pitch) with exposed thermal pad. Pin functions follow Renesas 78K0R/KE3 standard layout, including dedicated ports P0–P7, P12–P14, analog inputs (AN0–AN15), power pins (VDD/EVDD, VSS/EVSS), and debug interface (RES, FLMD0).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| P00–P06 | Port 0 bidirectional I/O | Configurable as general-purpose I/O or alternate functions including UART0 TX/RX, timer output, and external interrupt inputs |
| P10–P17 | Port 1 bidirectional I/O | Supports I²C SDA/SCL, UART1 TX/RX, and ADC trigger signals; includes pull-up/pull-down control |
| AN0–AN15 | Analog input channels | 16 dedicated pins mapped to 12-bit ADC; share physical pins with P40–P43, P50–P55, P120–P124, P140–P141 |
| RESET | Active-low reset input | Asynchronous reset signal; internal pull-up enabled; accepts external reset pulse or watchdog timeout assertion |
| FLMD0 | Flash mode select | Configures boot mode at power-on: high = user program mode, low = flash programming mode |
| VDD / EVDD | Power supply terminals | VDD supplies digital core (2.7–5.5 V); EVDD powers analog/ADC section - requires separate decoupling |
Key Features
| Feature | Design Value |
|---|---|
| On-chip Debug Interface | Single-wire debug (SWD) with real-time trace and breakpoint support - eliminates need for external emulator hardware |
| ADC Auto-Scan Mode | Hardware-controlled sequential conversion across up to 16 channels without CPU intervention - reduces firmware overhead in sensor polling |
| Timer Array Flexibility | Three independent 16-bit timer arrays each configurable as PWM generator, input capture, or interval timer - supports multi-phase motor control |
| Low-Power Stop Mode | Current draw ≤ 1.2 μA at 3.3 V with RAM retention and wake-up via external interrupt or RTC - extends battery life in portable devices |
| Flash Security Lock | Read-out protection enabled via lock bit; prevents unauthorized access to firmware image stored in on-chip Flash |
Applications
| Industrial Sensor Node | Brushless DC Motor Controller |
|---|---|
|
Use Scenario: Compact environmental monitoring unit measuring temperature, humidity, and CO₂ using analog and digital sensors. IC Role / Device Role / Timing Role: Central controller executing sensor data acquisition, calibration compensation, and RS-485 communication protocol stack. Use Value: Integrated 12-bit ADC with auto-scan and 16-channel support eliminates external mux IC; UART with LIN capability enables daisy-chain network topology. |
Use Scenario: Closed-loop speed and position control for HVAC blower motors using hall-effect feedback and three-phase gate drivers. IC Role / Device Role / Timing Role: Real-time motor commutation engine generating synchronized PWM outputs and capturing hall sensor edges with sub-microsecond latency. Use Value: Three independent 16-bit timer arrays provide precise phase-aligned PWM with dead-time insertion and fault shutdown - no external timing IC required. |
| Programmable Logic Relay | Smart Power Meter Interface |
|
Use Scenario: DIN-rail mounted relay module accepting digital inputs, executing ladder logic, and driving solid-state outputs with configurable timing. IC Role / Device Role / Timing Role: Deterministic execution host for IEC 61131-3 compliant runtime; manages I/O scanning, timer/coil state updates, and Modbus RTU over RS-485. Use Value: 128 KB Flash accommodates full runtime + user logic; 8 KB RAM ensures stable operand stack and data table storage during scan cycles. |
Use Scenario: Data concentrator interfacing with metrology ICs (e.g., ADE7878) and communicating via PLC or RF mesh to utility backend. IC Role / Device Role / Timing Role: Secure peripheral coordinator handling SPI-based metering data reads, AES-128 encryption, and time-synchronized event logging. Use Value: On-chip Flash security lock protects firmware and encryption keys; wide 2.7–5.5 V supply range tolerates fluctuating auxiliary power from metering rails. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F10PLGAFP#V0 | RL78/G13 core; 128 KB Flash, 12 KB RAM; lower active current (125 μA/MHz); no on-chip DAC | Better suited for ultra-low-power battery-operated nodes; lacks hardware LIN support present in UPD78F1164AGC-UEU-AX | Select when energy efficiency dominates over legacy peripheral compatibility |
| MB9BF506RPMC-G-S2 | ARM Cortex-M3 core; 512 KB Flash, 64 KB RAM; higher performance (100 MHz); different toolchain and debug interface | Targeted at complex motion control requiring floating-point math and RTOS; requires PCB redesign due to 144-pin LQFP vs. 100-pin | Select when scaling beyond 78K0R's 20 MHz throughput is required |
Compared with R5F10PLGAFP#V0 and MB9BF506RPMC-G-S2, the UPD78F1164AGC-UEU-AX delivers optimal balance of proven industrial peripheral integration (LIN, robust ADC timing), mature toolchain support (CC78K0R/RA78K0R), and pin-compatible upgrade path within the 78K0R/KE3 family - critical for sustaining long-lifecycle industrial designs.
Availability
UPD78F1164AGC-UEU-AX is available at Aetrix Electronics and suitable for industrial sensor nodes, brushless DC motor controllers, and programmable logic relays requiring stable component supply and long-term manufacturing continuity.
Supply support for UPD78F1164AGC-UEU-AX includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a global semiconductor leader specializing in microcontrollers, analog, power, and SoC solutions for industrial, automotive, and infrastructure markets.
The UPD78F1164AGC-UEU-AX belongs to the 78K0R/KE3 16-bit MCU product line, designed specifically for cost-sensitive, high-reliability industrial control applications requiring rich analog integration and deterministic real-time response.
FAQ
What is the maximum operating frequency of the UPD78F1164AGC-UEU-AX?
The UPD78F1164AGC-UEU-AX supports a maximum system clock frequency of 20 MHz when using the internal high-speed oscillator with PLL multiplication. This allows the 78K0R CPU core to execute instructions at peak throughput while maintaining timing compliance for all on-chip peripherals including the 12-bit ADC and UART modules. The UPD78F1164AGC-UEU-AX datasheet confirms this rating under the specified 2.7–5.5 V supply and −40°C to +85°C ambient conditions.
Does the UPD78F1164AGC-UEU-AX support in-system programming (ISP)?
Yes, the UPD78F1164AGC-UEU-AX supports in-application programming (IAP) via its on-chip Flash memory controller, enabling firmware updates without removing the device from the target board. Programming is performed through the single-wire debug interface or via UART using Renesas' standard Flash programming protocol. The UPD78F1164AGC-UEU-AX requires no external high-voltage supply - all operations use the standard VDD rail (2.7–5.5 V).
What debug interface does the UPD78F1164AGC-UEU-AX use?
The UPD78F1164AGC-UEU-AX uses a single-wire debug (SWD) interface compliant with Renesas' standard debug protocol for 78K0R devices. It supports full breakpoint, watchpoint, and real-time memory inspection capabilities using tools such as the E2 emulator or QB-MINI2. Unlike JTAG, SWD requires only two pins (RESET and SWDIO), simplifying PCB layout and reducing debug connector footprint for the UPD78F1164AGC-UEU-AX.
Is the UPD78F1164AGC-UEU-AX qualified for automotive applications?
No, the UPD78F1164AGC-UEU-AX is rated for Standard quality grade per Renesas documentation, targeting industrial equipment, office automation, and consumer appliances. It is not AEC-Q100 qualified and lacks the extended temperature range (−40°C to +125°C), enhanced ESD immunity, or automotive-specific qualification testing required for automotive use. For automotive alternatives, Renesas offers the RL78/F1x or RH850 families - not the UPD78F1164AGC-UEU-AX.
What is the Flash endurance specification for the UPD78F1164AGC-UEU-AX?
The UPD78F1164AGC-UEU-AX guarantees 100,000 write/erase cycles for its 128 KB on-chip Flash memory, as specified in Renesas' 78K0R/KE3 datasheet and confirmed in the U17854EJ9V0UD User's Manual. This endurance applies to both block erase and page write operations and is validated across the full operating temperature range (−40°C to +85°C). Wear leveling must be implemented in firmware if exceeding cycle limits is anticipated in the UPD78F1164AGC-UEU-AX application.
UPD78F1164AGC-UEU-AX Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 100-LQFP
- Series:
- 78K0R/Kx3
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Core Processor:
- 78K/0R
- Core Size:
- 16-Bit
- Speed:
- 20MHz
- Connectivity:
- 3-Wire SIO, I2C, LINbus, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 83
- Program Memory Size:
- 128KB (128K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- -
- RAM Size:
- 8K x 8
- Voltage - Supply (Vcc/Vdd):
- 1.8V ~ 5.5V
- Data Converters:
- A/D 16x10b; D/A 2x8b
- Oscillator Type:
- Internal
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
UPD78F1164AGC-UEU-AX FAQ
1.How can I place an order for UPD78F1164AGC-UEU-AX through Aetrix?
Please submit a Request for Quotation (RFQ) for UPD78F1164AGC-UEU-AX on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for UPD78F1164AGC-UEU-AX reliable?
The price and inventory of UPD78F1164AGC-UEU-AX are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for UPD78F1164AGC-UEU-AX is usually 5 days.
3.What payment methods are accepted for UPD78F1164AGC-UEU-AX?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for UPD78F1164AGC-UEU-AX transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for UPD78F1164AGC-UEU-AX?
UPD78F1164AGC-UEU-AX orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your UPD78F1164AGC-UEU-AX order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for UPD78F1164AGC-UEU-AX?
For technical support, including UPD78F1164AGC-UEU-AX datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your UPD78F1164AGC-UEU-AX requirements.
6.How does Aetrix verify that UPD78F1164AGC-UEU-AX is sourced from the original manufacturer or authorized distributors?
All UPD78F1164AGC-UEU-AX products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that UPD78F1164AGC-UEU-AX meets industry standards.
7.What is the process for return or replacement of UPD78F1164AGC-UEU-AX?
All UPD78F1164AGC-UEU-AX units undergo pre-shipment inspection (PSI). If there is an issue with UPD78F1164AGC-UEU-AX, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The UPD78F1164AGC-UEU-AX part is unused and in its original packaging.
Return procedure for UPD78F1164AGC-UEU-AX:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
UPD78F1164AGC-UEU-AX Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
