My Inquiry
My Account
Renesas UPD78F1814AGAA2-GAM-E2-G
- Part No.:
- UPD78F1814AGAA2-GAM-E2-G
- Manufacturer:
- Renesas
- Category:
- Microcontrollers
- Package:
- 48-LQFP
- Datasheet:
-
UPD78F1814AGAA2-GAM-E2-G.pdf
- Description:
- IC MCU 16BIT 48KB FLASH 48LQFP
- Quantity:
- Payment:
- Shipping:
Inventory:2,304
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
UPD78F1814AGAA2-GAM-E2-G from Renesas Electronics is a 16-bit single-chip microcontroller in the 78K0R/FC3 family, featuring 128 KB on-chip Flash memory, 8 KB RAM, and integrated peripherals including 12-bit ADC, 16-bit timer arrays, UART, I²C, and CAN 2.0B controller. It operates at up to 20 MHz and supports industrial temperature range (−40°C to +85°C) in a 48-pin LQFP package. It is used in motor control, industrial automation, and building management systems.
For engineers reviewing the UPD78F1814AGAA2-GAM-E2-G datasheet, UPD78F1814AGAA2-GAM-E2-G pinout, UPD78F1814AGAA2-GAM-E2-G application, or UPD78F1814AGAA2-GAM-E2-G equivalent, key selection considerations include Flash endurance (100,000 write/erase cycles), CAN bus timing compliance, ADC sampling rate (1.25 MSPS), and support for on-chip debug via QB-MINI2.
Technical Context
The UPD78F1814AGAA2-GAM-E2-G implements the 78K0R CPU core with 16-bit architecture, Harvard memory organization, and instruction set compatible with earlier 78K0 devices. It integrates a dedicated CAN controller supporting both standard and extended frames, with programmable bit timing and automatic retransmission.
Its peripheral set includes three 16-bit timer arrays (each with capture/compare/PWM functions), a 12-channel 12-bit ADC with hardware-triggered conversion, and dual serial interfaces (UART and I²C) with clock synchronization logic. The device uses on-chip voltage regulator (REGC pin) for internal core supply and supports low-power modes including HALT and STOP.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Core Architecture | 78K0R 16-bit CPU with 3-stage pipeline and 1 MB address space |
| Flash Memory | 128 KB on-chip Flash with 100,000 write/erase cycles; supports in-application programming |
| RAM Size | 8 KB on-chip RAM with wait-state-free access at 20 MHz |
| ADC Resolution | 12-bit successive-approximation ADC with 12 input channels and 1.25 MSPS max sampling rate |
| CAN Interface | One CAN 2.0B controller with 32 message objects, programmable bit timing, and loopback self-test mode |
| Operating Voltage | 2.7 V to 5.5 V supply range; internal regulator generates 1.8 V core voltage from REGC pin |
| Temperature Range | −40°C to +85°C ambient operating range (Industrial grade) |
| Package | 48-pin LQFP (7 mm × 7 mm, 0.5 mm pitch) with exposed thermal pad |
Pinout & Package
UPD78F1814AGAA2-GAM-E2-G is housed in a 48-pin LQFP package (7 mm × 7 mm, 0.5 mm pitch) with exposed thermal pad (GND-connected) for enhanced thermal dissipation in motor control and industrial applications.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VDD, EVDD0, EVDD1 | Power supply inputs | VDD = main digital supply (2.7–5.5 V); EVDD0/EVDD1 = analog/dedicated peripheral supplies for ADC and timers |
| VSS, EVSS0, EVSS1 | Ground terminals | VSS = digital ground; EVSS0/EVSS1 = analog/peripheral ground planes for noise isolation in mixed-signal operation |
| REGC | Internal regulator capacitor connection | Connects external 1.0 μF ceramic capacitor to stabilize internal 1.8 V core voltage regulator output |
| RESET | Active-low reset input | Asynchronous reset signal; internal pull-up enables power-on reset without external circuitry |
| P10–P17, P40–P47 | General-purpose I/O ports | Configurable as input/output with selectable pull-up; support interrupt-on-change and alternate functions (UART/I²C/CAN) |
| TXD0/RXD0 | UART channel 0 interface | Dedicated full-duplex serial pins supporting asynchronous communication up to 2 Mbps at 20 MHz system clock |
| CAN_TX/CAN_RX | CAN physical layer interface | Differential CAN bus transceiver interface pins compliant with ISO 11898-2; require external high-speed transceiver |
Key Features
| Feature | Design Value |
|---|---|
| On-chip CAN 2.0B controller | Enables real-time deterministic communication in distributed industrial networks without external protocol IC |
| Hardware ADC trigger synchronization | Allows precise timing of analog sampling relative to PWM edges or timer events for motor current sensing |
| Multi-level low-power modes | Halt (CPU stopped, peripherals active) and Stop (all clocks halted) reduce current to ≤1.5 μA at 3.3 V |
| On-chip debug interface | Single-wire debug (SWD) via P10/P11 supports full-speed breakpoints, register inspection, and flash programming via QB-MINI2 |
| Flash memory security lock | Prevents unauthorized read-out of firmware by disabling external read commands after programming completion |
Applications
| Motor Control Systems | Industrial PLC Modules |
|---|---|
Use Scenario: Closed-loop control of 3-phase BLDC motors in HVAC blowers and factory automation drives. IC Role / Device Role / Timing Role: Main system controller executing FOC algorithms, managing PWM generation, and sampling phase currents via ADC. Use Value: Integrated CAN interface enables seamless integration into fieldbus-based motion control networks with deterministic latency under 200 μs. | Use Scenario: Compact remote I/O modules handling digital input/output, analog sensor acquisition, and local logic execution. IC Role / Device Role / Timing Role: Central processing unit coordinating data acquisition, ladder logic execution, and fieldbus communication. Use Value: 12-bit ADC with hardware-triggered sampling achieves ±0.5 LSB INL across −40°C to +85°C, ensuring stable sensor readings in uncontrolled environments. |
| Building Energy Management | Smart Power Meters |
Use Scenario: HVAC zone controllers collecting temperature/humidity data, driving actuators, and reporting status over CAN bus. IC Role / Device Role / Timing Role: Real-time embedded controller managing multi-sensor fusion, PID regulation, and secure firmware updates. Use Value: Flash endurance of 100,000 cycles supports over-the-air firmware upgrades every 3 months for 10+ years without wear-out risk. | Use Scenario: DIN-rail mounted electricity meters performing RMS voltage/current measurement and tariff calculation. IC Role / Device Role / Timing Role: Metering SoC handling metrology calculations, tamper detection, and DLMS/COSEM protocol stack. Use Value: Dual EVDD/EVSS power domains isolate ADC reference from digital switching noise, achieving <100 μVpp ripple on AVREF at full load. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar 16-bit microcontroller applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| R5F10PLGCLFB#30 | RL78/G13 core; 128 KB Flash, 12 KB RAM; no CAN; lower max frequency (32 MHz vs 20 MHz effective throughput) | Lacks integrated CAN controller; requires external transceiver and protocol stack implementation | Choose when CAN is not required and lower power consumption (<0.5 μA in deep stop) is critical |
| MB9BF526KPMC-G-S2 | ARM Cortex-M3 core; 512 KB Flash, 64 KB RAM; CAN FD capable; higher performance but larger footprint (64-pin LQFP) | Supports CAN FD (5 Mbps) and advanced crypto accelerators; targets next-gen industrial gateways | Choose when future-proofing for CAN FD migration or need cryptographic services for secure firmware updates |
Compared with R5F10PLGCLFB#30 and MB9BF526KPMC-G-S2, the UPD78F1814AGAA2-GAM-E2-G delivers optimal balance of CAN 2.0B integration, industrial temperature reliability, and proven ecosystem support-making it ideal for cost-sensitive, volume-deployed industrial nodes where deterministic timing and legacy CAN infrastructure compatibility are essential.
Availability
UPD78F1814AGAA2-GAM-E2-G is available at Aetrix Electronics and suitable for motor control systems, industrial PLC modules, building energy management units, and smart power meters requiring stable component supply across long production lifecycles.
Supply support for UPD78F1814AGAA2-GAM-E2-G includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a Japanese semiconductor manufacturer specializing in microcontrollers, analog, power, and SoC solutions for industrial, automotive, and IoT markets.
The UPD78F1814AGAA2-GAM-E2-G belongs to the 78K0R/Fx3 product line, designed specifically for cost-optimized, real-time industrial control applications requiring robust peripheral integration-including CAN, high-precision ADC, and low-power operation-in compact packages.
FAQ
What is the maximum operating frequency of the UPD78F1814AGAA2-GAM-E2-G?
The UPD78F1814AGAA2-GAM-E2-G operates at a maximum system clock frequency of 20 MHz. This frequency is supported across its full industrial temperature range (−40°C to +85°C) and supply voltage range (2.7 V to 5.5 V). The internal PLL allows flexible clock source configuration, including external crystal (1–20 MHz), ceramic resonator, or internal high-speed oscillator. At 20 MHz, the CPU executes instructions at approximately 10 MIPS due to its 3-stage pipeline architecture.
Does the UPD78F1814AGAA2-GAM-E2-G include an integrated CAN transceiver?
No, the UPD78F1814AGAA2-GAM-E2-G integrates only the CAN protocol controller (CAN 2.0B compliant), not the physical layer transceiver. It requires an external high-speed CAN transceiver (e.g., TJA1042, SN65HVD230) connected to its CAN_TX and CAN_RX pins. The controller supports all CAN 2.0B features including identifier masking, message filtering, automatic retransmission, and error frame handling - but physical bus driving and differential signaling must be handled externally.
What debug interface does the UPD78F1814AGAA2-GAM-E2-G support?
The UPD78F1814AGAA2-GAM-E2-G supports Renesas' single-wire debug (SWD) interface via pins P10 (SWCLK) and P11 (SWDIO), compatible with the QB-MINI2 on-chip debug emulator. This interface enables full-speed debugging, real-time register and memory inspection, flash programming, and breakpoint setting without halting peripheral operation. No JTAG header is required, reducing PCB footprint and simplifying development setup.
How is the internal voltage regulator configured on the UPD78F1814AGAA2-GAM-E2-G?
The UPD78F1814AGAA2-GAM-E2-G uses the REGC pin to connect an external 1.0 μF ceramic capacitor, which stabilizes the internal 1.8 V core voltage regulator. This regulator powers the CPU core and internal logic independently of the main VDD supply (2.7–5.5 V), improving noise immunity and enabling stable operation across wide input voltage ranges. The REGC capacitor must be placed within 3 mm of the REGC pin with low-inductance routing for reliable startup and transient response.
Is the UPD78F1814AGAA2-GAM-E2-G qualified for automotive applications?
No, the UPD78F1814AGAA2-GAM-E2-G is rated for industrial-grade operation (−40°C to +85°C) and classified as a "Standard" quality grade per Renesas documentation. It is not AEC-Q100 qualified and lacks automotive-specific features such as extended temperature range (−40°C to +125°C), enhanced ESD protection, or fault-tolerant CAN implementations. For automotive use, Renesas recommends the RL78/F14 or RH850/F1L families instead.
UPD78F1814AGAA2-GAM-E2-G Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Package/Case:
- 48-LQFP
- Series:
- 78K0R/Fx3
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Last Time Buy
- Programmable:
- -
- Core Processor:
- 78K/0R
- Core Size:
- 16-Bit
- Speed:
- 24MHz
- Connectivity:
- CSI, I2C, LINbus, SPI, UART/USART
- Peripherals:
- DMA, LVD, POR, PWM, WDT
- Number of I/O:
- 36
- Program Memory Size:
- 48KB (48K x 8)
- Program Memory Type:
- FLASH
- EEPROM Size:
- 16K x 8
- RAM Size:
- 3K x 8
- Voltage - Supply (Vcc/Vdd):
- 2.7V ~ 5.5V
- Data Converters:
- A/D 11x10b SAR
- Oscillator Type:
- External, Internal
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
UPD78F1814AGAA2-GAM-E2-G FAQ
1.How can I place an order for UPD78F1814AGAA2-GAM-E2-G through Aetrix?
Please submit a Request for Quotation (RFQ) for UPD78F1814AGAA2-GAM-E2-G on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for UPD78F1814AGAA2-GAM-E2-G reliable?
The price and inventory of UPD78F1814AGAA2-GAM-E2-G are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for UPD78F1814AGAA2-GAM-E2-G is usually 5 days.
3.What payment methods are accepted for UPD78F1814AGAA2-GAM-E2-G?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for UPD78F1814AGAA2-GAM-E2-G transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for UPD78F1814AGAA2-GAM-E2-G?
UPD78F1814AGAA2-GAM-E2-G orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your UPD78F1814AGAA2-GAM-E2-G order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for UPD78F1814AGAA2-GAM-E2-G?
For technical support, including UPD78F1814AGAA2-GAM-E2-G datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your UPD78F1814AGAA2-GAM-E2-G requirements.
6.How does Aetrix verify that UPD78F1814AGAA2-GAM-E2-G is sourced from the original manufacturer or authorized distributors?
All UPD78F1814AGAA2-GAM-E2-G products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that UPD78F1814AGAA2-GAM-E2-G meets industry standards.
7.What is the process for return or replacement of UPD78F1814AGAA2-GAM-E2-G?
All UPD78F1814AGAA2-GAM-E2-G units undergo pre-shipment inspection (PSI). If there is an issue with UPD78F1814AGAA2-GAM-E2-G, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The UPD78F1814AGAA2-GAM-E2-G part is unused and in its original packaging.
Return procedure for UPD78F1814AGAA2-GAM-E2-G:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
UPD78F1814AGAA2-GAM-E2-G Tags
-
ATTINY4-TSHR
Microchip Technology
-
ATTINY10-TSHR
Microchip Technology
-
ATTINY10-TS8R
Microchip Technology
-
ATTINY202-SSNR
Microchip Technology
-
ATTINY202-SSFR
Microchip Technology
-
ATTINY402-SSNR
Microchip Technology
-
PIC16F15213T-I/MF
Microchip Technology
-
PIC16F15213-E/MF
Microchip Technology
-
PIC10F200T-I/OT
Microchip Technology
-
ATTINY412-SSNR
Microchip Technology
-
PIC10F202T-I/OT
Microchip Technology
-
ATTINY404-SSNR
Microchip Technology
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
