My Inquiry
My Account
STMicroelectronics VND5004CSP30-E
- Part No.:
- VND5004CSP30-E
- Manufacturer:
- STMicroelectronics
- Package:
- 30-PowerSOP (0.630", 16.00mm Width)
- Datasheet:
-
VND5004CSP30-E.pdf
- Description:
- IC PWR SWITCH N-CH MULTIPWRSO-30
- Quantity:
- Payment:
- Shipping:
Inventory:2,594
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
VND5004CSP30 from STMicroelectronics is a dual-channel AEC-Q100 qualified high-side driver with integrated analog current sense, designed for automotive resistive/inductive load control. It delivers 4 mΩ on-state resistance per channel, 100 A typical current limiting, and operates across 4.5–27 V supply range-enabling robust power switching in engine control units and body electronics.
For engineers reviewing the VND5004CSP30 datasheet, VND5004CSP30 pinout, VND5004CSP30 application, or VND5004CSP30 equivalent, key selection criteria include its proportional current sense ratio (12.7 kA/A typ), thermal shutdown with auto-restart, reverse battery protection with self-switch-on, and compliance with ISO 7637-2 Pulse 5b load dump transients up to +87 V.
Technical Context
This device implements ST's VIPower® M0-5 technology to integrate two independent high-side switches with active power limitation, inrush current management, and real-time analog current feedback. Each channel features CMOS-compatible 3.0 V logic inputs with hysteresis, undervoltage lockout (4.5 V threshold), and VCC clamp protection up to 46 V.
The current sense architecture delivers a proportional output current (ISENSE) referenced to ground, scalable via external resistor, with disable control via CS_DIS. Diagnostic outputs include thermal shutdown indication and overcurrent detection, all coordinated within a single MultiPowerSO-30 package optimized for automotive thermal cycling and EMI resilience.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Supply voltage range | 4.5 V to 27 V - supports full automotive battery range including cold-crank and load-dump conditions |
| Max transient VCC | 41 V (400 ms) - withstands ISO 7637-2 Pulse 1 and Pulse 5a without external clamping |
| RON (per channel) | 4 mΩ @ 15 A, 25 °C - enables low conduction loss and <1 W dissipation at 25 A continuous |
| Current limit (typ) | 100 A - provides short-circuit protection while allowing high peak loads like fuel injectors or solenoids |
| Current sense ratio K1 | 12,730 A/A (typ) - yields ~1.18 mA ISENSE at 15 A load, enabling precise analog monitoring with standard op-amps |
| Thermal shutdown | 150 °C junction - triggers automatic restart after cooling below 135 °C, preventing latch-up during overload |
| Reverse battery protection | Self-switch-on at –13 V - maintains functionality without external diodes during reverse polarity events |
Pinout & Package
Package: MultiPowerSO-30 (30-pin exposed pad thermally enhanced SO package, RoHS-compliant, AEC-Q100 qualified).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| VCC | Battery supply input | Protected by internal clamp (46 V max); supports load dump energy absorption via cyclic PowerMOS switching |
| GND | Power and signal reference | Common return for outputs, inputs, and current sense; tied to exposed thermal pad for heatsinking |
| OUTPUT1, OUTPUT2 | High-side switched outputs | Drive loads connected to ground; each rated for 100 A short-circuit current and 4 mΩ RON |
| INPUT1, INPUT2 | CMOS-compatible control inputs | 3.0 V logic compatible with microcontrollers; 0.25 V hysteresis prevents noise-induced switching |
| CURRENT SENSE1,2 | Analog current feedback outputs | Deliver proportional current (K1 = 12.7 kA/A) when CS_DIS = low; high-Z when CS_DIS = high |
| CS_DIS | Current sense enable/disable | Active-high CMOS input; disables sense outputs and reduces quiescent current during diagnostics or sleep mode |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q100 Grade 0 qualification | Validated for –40 °C to +150 °C operation - suitable for under-hood applications including transmission control modules |
| Proportional analog current sense | 12.7 kA/A ratio with ±15% tolerance - enables closed-loop current regulation without shunt resistors or isolation |
| Load dump protection | Withstands +87 V ISO 7637-2 Pulse 5b - eliminates need for external TVS in many body control module designs |
| Reverse battery self-protection | Automatic PowerMOS turn-on at –13 V - avoids fuse blowout and preserves system functionality during polarity reversal |
| Low standby current | 2 μA @ 13 V - meets automotive "off" state leakage requirements for always-on gateways and telematics units |
Applications
| Engine Control Unit (ECU) | Body Control Module (BCM) |
|---|---|
Use Scenario: Driving fuel injectors and ignition coils in gasoline/diesel engines. IC Role / Device Role / Timing Role: High-side switch with fast turn-on/turn-off (25/35 μs delay) and demagnetization energy handling up to 342 mJ. Use Value: Enables precise pulse-width modulation of injector current while surviving cranking transients and coil flyback spikes. |
Use Scenario: Controlling headlights, fog lamps, and HVAC blowers in modern vehicle lighting systems. IC Role / Device Role / Timing Role: Dual-channel load driver with independent current sense for real-time lamp health monitoring. Use Value: Detects open-circuit or short-circuit faults before thermal damage occurs, reducing warranty claims and service costs. |
| Transmission Control Unit (TCU) | Advanced Driver Assistance Systems (ADAS) |
Use Scenario: Actuating solenoid valves in 8-speed automatic transmissions. IC Role / Device Role / Timing Role: High-current (100 A peak), low-RON (4 mΩ) switch with thermal foldback to prevent overheating during gear shifts. Use Value: Maintains valve response time consistency across temperature extremes (-40 °C to +150 °C junction). |
Use Scenario: Powering radar module cooling fans and camera focus actuators in ADAS domain controllers. IC Role / Device Role / Timing Role: Protected high-side driver with diagnostic feedback for functional safety (ASIL-B capable when used with MCU supervision). Use Value: Provides fail-safe shutdown and current reporting to meet ISO 26262 diagnostic coverage requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-side driver applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| TPS4H160-Q1 | Single-channel, 160 mΩ RON, no analog current sense - uses digital SPI diagnostics instead | Limited to lower-power loads (<2 A); lacks proportional analog feedback needed for closed-loop control | Prefer for cost-sensitive, low-current applications where SPI-based fault logging suffices |
| BD82001FV-M | Dual-channel, 10 mΩ RON, no reverse battery protection or load dump immunity beyond 40 V | Requires external TVS and reverse-polarity diode; unsuitable for direct battery-connected modules | Consider only in non-critical interior modules with regulated 5 V supply and minimal transient exposure |
Compared with TPS4H160-Q1 and BD82001FV-M, the VND5004CSP30 uniquely combines dual-channel 4 mΩ switching, AEC-Q100 Grade 0 rating, analog current sense, and integrated load dump/reverse-battery protection-making it the only option qualified for direct battery connection in powertrain and chassis control units.
Availability
VND5004CSP30 is available at Aetrix Electronics and suitable for engine control units, body control modules, and transmission control units requiring stable component supply across extended automotive lifecycles.
Supply support for VND5004CSP30 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, specializing in automotive, industrial, and power management ICs.
The VND5004CSP30 belongs to ST's VIPower® high-side driver family, engineered specifically for automotive power distribution and load control with integrated diagnostics and ruggedized transient protection.
FAQ
What is the maximum continuous output current per channel?
The VND5004CSP30 does not specify a fixed continuous current rating due to thermal dependence on PCB layout and ambient conditions. At Tj = 150 °C with one channel active and a 58 mm × 58 mm copper area, Rthj-amb = 58 °C/W allows ~3.5 A continuous. Higher currents (e.g., 15 A) are supported for pulsed operation or with enhanced heatsinking, limited by RON = 8 mΩ at 150 °C and thermal shutdown at 150 °C.
How does the current sense function behave when CS_DIS is high?
When CS_DIS is driven high (≥2.1 V), both CURRENT SENSE1 and CURRENT SENSE2 pins enter high-impedance state, drawing ≤1 μA leakage current. This disables analog feedback and reduces system power consumption during sleep or diagnostic modes, while preserving the ability to re-enable sensing instantly upon CS_DIS transition to low.
Can VND5004CSP30 drive inductive loads without external freewheeling diodes?
Yes-the device integrates active VCC clamp and output voltage clamp (VDEMAG = VCC − 30 V typical) to absorb demagnetization energy from inductive loads like solenoids and relays. With L = 6 mH and VCC = 13.5 V, it safely handles up to 342 mJ per pulse without external diodes, provided PCB copper area meets minimum thermal requirements.
What is the significance of the MultiPowerSO-30 package's exposed thermal pad?
The exposed thermal pad in the MultiPowerSO-30 package provides a low-thermal-resistance path (Rthj-case = 0.35 °C/W) from the die to the PCB. It must be soldered to a ≥58 mm × 58 mm copper pour (35 μm thick) to achieve the specified Rthj-amb = 58 °C/W. Omitting this connection degrades thermal performance by >40%, risking premature thermal shutdown under sustained load.
VND5004CSP30-E Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Package/Case:
- 30-PowerSOP (0.630", 16.00mm Width)
- Series:
- VIPower™
- Packaging:
- Tube
- Product Status:
- Discontinued at Digi-Key
- Switch Type:
- General Purpose
- Number of Outputs:
- 2
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- High Side
- Output Type:
- N-Channel
- Interface:
- On/Off
- Voltage - Load:
- 4.5V ~ 27V
- Voltage - Supply (Vcc/Vdd):
- Not Required
- Current - Output (Max):
- 70A
- Rds On (Typ):
- 4mOhm (Max)
- Input Type:
- Non-Inverting
- Features:
- Auto Restart
- Fault Protection:
- Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO
- Operating Temperature:
- -40°C ~ 125°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- MultiPowerSO-30
VND5004CSP30-E FAQ
1.How can I place an order for VND5004CSP30-E through Aetrix?
Please submit a Request for Quotation (RFQ) for VND5004CSP30-E on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for VND5004CSP30-E reliable?
The price and inventory of VND5004CSP30-E are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VND5004CSP30-E is usually 5 days.
3.What payment methods are accepted for VND5004CSP30-E?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VND5004CSP30-E transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for VND5004CSP30-E?
VND5004CSP30-E orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your VND5004CSP30-E order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for VND5004CSP30-E?
For technical support, including VND5004CSP30-E datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VND5004CSP30-E requirements.
6.How does Aetrix verify that VND5004CSP30-E is sourced from the original manufacturer or authorized distributors?
All VND5004CSP30-E products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VND5004CSP30-E meets industry standards.
7.What is the process for return or replacement of VND5004CSP30-E?
All VND5004CSP30-E units undergo pre-shipment inspection (PSI). If there is an issue with VND5004CSP30-E, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The VND5004CSP30-E part is unused and in its original packaging.
Return procedure for VND5004CSP30-E:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
VND5004CSP30-E Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
