STMicroelectronics VND5N07-1-E

Overview

VND5N07-1-E from STMicroelectronics is an OMNIFET II fully autoprotected high-side Power MOSFET in IPAK (TO-251) package, designed for DC–50 kHz switching in industrial and automotive load control. It features 0.2 Ω R_DS(on) at 10 V_IN, 5 A typical current limit, 70 V drain-source clamp, thermal shutdown at 150 °C, and diagnostic feedback via the input pin. Used in solenoid drivers, motor control, and lighting modules where ruggedness and fault reporting are critical.

For engineers reviewing the VND5N07-1-E datasheet, VND5N07-1-E pinout, VND5N07-1-E application, or VND5N07-1-E equivalent, this page delivers verified electrical specs, protection behavior, real-world use cases, and validated alternatives - all grounded in ST's production-grade documentation (DocID025077 Rev 2).

Technical Context

The device integrates a VIPower® M0 monolithic structure with direct gate access for analog driving, enabling linear-mode operation and precise current regulation. Its internal linear current limiter activates independently of input voltage and holds I_D at 5 A (typ) during overload, while the overvoltage clamp sustains 70 V to protect against inductive kickback.

Thermal protection uses on-die junction sensing for fast response: shutdown triggers at ≥150 °C and auto-restarts below 135 °C. Fault status is signaled by pulling the INPUT pin to ground through ~100 Ω, allowing simple microcontroller-level detection without external circuitry.

Key Specifications

Pinout & Package

IPAK (TO-251) package: surface-mount, 3-pin single-ended leadframe with exposed drain pad for thermal dissipation. Case temperature derating begins above 25 °C; R_th(j-case) = 3.75 °C/W.

Key Features

Applications

Equivalent & Alternatives

The following parts are listed as comparable options for similar high-side smart switch applications.

Compared with VND5N07-1-E, the VND5E07TR-E offers identical protection and drive performance in a different thermal package, while the IPS1032H trades analog controllability and current capability for lower system cost and simplified digital interfacing.

Availability

VND5N07-1-E is available at Aetrix Electronics and suitable for industrial solenoid control, automotive lighting modules, motor start/stop circuits, and heating element supervision requiring stable component supply and long-term lifecycle support.

Supply support for VND5N07-1-E includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, delivering silicon solutions for automotive, industrial, and consumer markets with emphasis on reliability and integration.

The OMNIFET II product line targets ruggedized high-side power switching in harsh environments, combining VIPower® technology with autonomous protection to simplify system-level safety design.

FAQ

What is the maximum continuous drain current for VND5N07-1-E?

The device does not specify a fixed continuous I_D rating due to thermal dependence. Its linear current limiter caps I_D at 5 A (typ) under overload, but steady-state current is limited by junction temperature. At T_c = 25 °C, P_tot = 60 W allows ~17 A with ideal heatsinking; practical continuous current is typically ≤3 A without forced cooling per derating curves in Figure 11.

Can VND5N07-1-E be used in PWM applications?

Yes - it supports switching up to 50 kHz with specified turn-on/turn-off times (e.g., t_d(on) = 100 ns typ, t_f = 80 ns typ at R_gen = 10 Ω). Its direct gate access enables analog PWM dimming, but thermal management must account for switching losses, especially at >10 kHz duty cycles with inductive loads.

How does the diagnostic feedback function work during a fault?

During overtemperature or short-circuit fault, the internal protection circuit disconnects the INPUT pin from the gate and connects it to ground via ~100 Ω. This pulls the pin to near 0 V, detectable by any MCU GPIO configured as input with pull-up. No external components are needed - the 50 mA sink capability ensures robust signal integrity even with long traces.

Is VND5N07-1-E compliant with automotive AEC-Q100 standards?

No - the datasheet explicitly states ST products are not designed or authorized for automotive applications unless expressly designated as such. VND5N07-1-E is qualified for industrial use only and lacks AEC-Q100 stress testing, failure analysis, or automotive-grade qualification documentation.