Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Home > Products > Integrated Circuits (ICs) > Power Management (PMIC) > Power Distribution Switches, Load Drivers

STMicroelectronics VND60013TR

Name: VND60013TR
Brand: STMicroelectronics
SKU: VND60013TR
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Compare

Part No.:: VND60013TR

Manufacturer:: STMicroelectronics

Category:: Power Distribution Switches, Load Drivers

Package:: 16-SOIC (0.295", 7.50mm Width)

Datasheet:: VND60013TR.pdf

Description:: IC PWR DRIVER N-CHANNEL 1:1 16SO

Quantity:: RFQ Add To RFQ list

Payment:

Shipping:

Inventory:2,520

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Product details

Overview

VND60013TR from STMicroelectronics is a dual-channel high-side solid-state relay (HSD) in SO-16L package, designed for ground-referenced resistive/inductive loads in automotive and industrial power distribution. It delivers 25 A per channel, features 35 mΩ R_DS(on), integrated proportional current sense (K ≈ 4400), and operates across 5.5–36 V_CC. Used in body control modules for headlight and fan control.

For engineers reviewing the VND60013TR datasheet, VND60013TR pinout, VND60013TR application, or VND60013TR equivalent, key selection criteria include thermal shutdown behavior at 150°C, reverse-battery protection capability, ISO 7637-2 pulse immunity, and analog current sense linearity over –40°C to 150°C.

Technical Context

The VND60013TR integrates two independent VIPower M0-3 high-voltage DMOS channels with active clamp diodes, under-voltage lockout (4 V threshold), and over-voltage shutdown (36 V). Each channel includes dedicated logic input, output, current sense terminal, and thermal foldback with automatic restart.

Its current sense circuit delivers I_SENSE = I_OUT/K where K ranges 3300–6000 depending on load and temperature; sense delay is 500 µs. Protection logic responds to loss of ground, loss of V_CC, short-to-V_CC, and short-to-ground events with diagnostic voltage outputs.

Key Specifications

Parameter	Value and Actual Design Meaning
R_DS(on)	35 mΩ typical at 5 A, 25°C - enables low conduction loss and <50 mV output drop at 0.5 A.
I_OUT per channel	25 A continuous - supports high-power solenoids, lamps, and motors with PCB copper heatsinking.
V_CC range	5.5–36 V - covers full automotive battery range including cold-crank (5.5 V) and load-dump transients (36 V).
Current sense ratio K	4400 typ. (I_OUT/I_SENSE) - yields 1.14 mA sense current at 5 A output, compatible with standard ADC inputs.
Thermal shutdown	150°C junction - triggers automatic current limiting and restart after cooldown to 135°C.
ISO 7637-2 immunity	Pulse 1 (–100 V), Pulse 2a (+100 V), Pulse 3b (+100 V) - meets automotive EMC requirements without external clamping.
Reverse battery protection	With external DGND diode or RGND resistor - prevents damage during incorrect battery connection.

Pinout & Package

SO-16L thermally enhanced surface-mount package with exposed thermal pad (pin 16 connected to GND). Dual-channel layout enables independent control and sensing per output.

Pin/Terminal	Circuit Role	Design Meaning
1, 9	INPUT 1 / INPUT 2	CMOS-compatible digital inputs (VIH = 3.25 V, VIL = 1.25 V); hysteresis 0.5 V prevents noise-induced switching.
2, 10	OUTPUT 1 / OUTPUT 2	High-side switched outputs - connect load between V_CC and OUTPUT; sink current to ground via load.
3, 11	CURRENT SENSE 1 / CURRENT SENSE 2	Analog current-proportional outputs - deliver I_SENSE = I_OUT/K; max 4 V swing into 10 kΩ load.
4, 12	GND	Power ground reference - must be low-impedance; device shuts down if disconnected (loss-of-ground detection).
5, 13	V_CC	Main supply input - powers internal circuitry and provides clamp path for transients; rated 41 V absolute max.
16	Exposed thermal pad	Internally connected to GND - requires soldered thermal land for R_thj-amb ≤ 48 °C/W (6 cm² Cu).

Key Features

Feature	Design Value
Proportional current sense	Factory-trimmed K = 4400 ±10% over –40°C to 150°C - enables accurate real-time load monitoring without shunt resistors.
Active over-voltage clamp	Clamps V_CC to 41–55 V at 20 mA - suppresses ISO 7637 Pulse 1/2a transients without external TVS diodes.
Loss-of-ground detection	Automatic shutdown within microseconds if GND pin disconnects - prevents uncontrolled output state during wiring faults.
Very low standby dissipation	12 µA supply current in off-state - reduces parasitic drain in always-on vehicle networks (e.g., CAN wake-up circuits).
Short-to-V_CC protection	Detects and disables output when OUTPUT pin is shorted to V_CC - avoids false turn-on and thermal runaway.

Applications

Automotive Body Control

Industrial Motor Starter

Use Scenario: Controlling headlights, fog lamps, and interior lighting in modern BCMs with centralized power distribution.

IC Role / Device Role / Timing Role: High-side switch providing PWM dimming, diagnostics, and short-circuit protection per lamp circuit.

Use Value: Eliminates mechanical relays, reduces PCB space by 60%, and enables real-time current-based fault logging via I_SENSE.

Use Scenario: Starting 12 V DC fans, pumps, and actuators in HVAC and factory automation systems.

IC Role / Device Role / Timing Role: Solid-state replacement for electromechanical contactors, delivering precise turn-on/turn-off timing (t_d(on)/t_d(off) = 30 µs).

Use Value: Withstands 100,000+ switching cycles vs. 10,000 for relays; thermal shutdown prevents coil burnout during jam conditions.

Truck Trailer Power Distribution

Off-Highway Equipment Lighting

Use Scenario: Managing trailer lighting loads (brake lights, turn signals) from cab-mounted controllers with long cable runs.

IC Role / Device Role / Timing Role: High-side driver with integrated reverse-battery protection and load-dump immunity per ISO 16750-2.

Use Value: Survives –14 V reverse polarity and +100 V load-dump spikes without external protection components.

Use Scenario: Controlling LED work lights and beacon arrays on construction, mining, and agricultural machinery.

IC Role / Device Role / Timing Role: Dual-channel HSD enabling synchronized or independent control of multiple light banks with current feedback.

Use Value: Proportional current sense allows brightness calibration and open-load detection - critical for safety-critical lighting compliance.

Equivalent & Alternatives

The following parts are listed as comparable options for similar high-side driver applications.

Alternative Part	Technical Difference	Application Difference	Selection Advice
STSPIN32F0B	Integrated 3-phase gate driver + Cortex-M0 MCU; no analog current sense; 3 A per half-bridge.	Targeted at BLDC motor control, not discrete load switching.	Select when closed-loop motor commutation is required; not suitable for simple on/off relay replacement.
TPS4H160-Q1	Single-channel, 160 mΩ R_DS(on), 3.5 A max, no integrated current sense, AEC-Q100 qualified.	Lacks proportional sense and dual-channel integration; lower current rating.	Choose for cost-sensitive single-load applications where diagnostics are handled externally.

Compared with VND60013TR, STSPIN32F0B adds processing but sacrifices current capacity and analog sensing; TPS4H160-Q1 offers automotive qualification but lacks dual-channel integration and precision current monitoring - making VND60013TR optimal for multi-load, diagnostic-rich automotive power distribution.

Availability

VND60013TR is available at Aetrix Electronics and suitable for automotive body control modules, industrial motor starters, and off-highway equipment lighting requiring stable component supply and long-term lifecycle support.

Supply support for VND60013TR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, specializing in automotive, industrial, and power management ICs with vertical manufacturing and AEC-Q100 qualification expertise.

The VND600 belongs to ST's VIPower high-side driver product line, engineered specifically for robust, intelligent power distribution in harsh automotive environments with integrated protection and diagnostics.

FAQ

What is the maximum continuous output current per channel?

The VND60013TR supports 25 A per channel when all output pins are connected to sufficient PCB copper area (≥6 cm²) and ambient temperature remains ≤85°C. Derating applies above 85°C case temperature per Figure 13; at 125°C case, current limit drops to ~12 A due to thermal foldback.

How does the current sense output behave during thermal shutdown?

During thermal shutdown (T_j ≥ 150°C), the current sense output transitions to V_SENSEH = 5.5 V (typical) with 400 Ω output impedance, signaling overtemperature condition to the MCU. This diagnostic voltage remains stable until junction cools below 135°C reset threshold.

Can VND60013TR drive inductive loads without external flyback diodes?

No - external flyback diodes are mandatory for inductive loads. The internal V_CC clamp only handles low-energy transients (ISO 7637 Pulse 1/2a); demagnetization energy from coils requires external diodes connected from OUTPUT to V_CC to prevent destructive voltage spikes exceeding 55 V.

Is the SO-16L package RoHS and REACH compliant?

Yes - the VND60013TR uses ST's ECOPACK®2-compliant SO-16L package, meeting RoHS Directive 2011/65/EU and REACH Regulation (EC) No. 1907/2006, with lead-free matte tin terminations and halogen-free molding compound.

VND60013TR Specifications

Product attributes: Attribute value

Manufacturer:: STMicroelectronics

Package/Case:: 16-SOIC (0.295", 7.50mm Width)

Series:: -

Packaging:: Tape & Reel (TR)

Product Status:: Obsolete

Switch Type:: General Purpose

Number of Outputs:: 2

Ratio - Input:Output:: 1:1

Output Configuration:: High Side

Output Type:: N-Channel

Interface:: On/Off

Voltage - Load:: 5.5V ~ 36V

Voltage - Supply (Vcc/Vdd):: Not Required

Current - Output (Max):: 25A

Rds On (Typ):: 35mOhm (Max)

Input Type:: Non-Inverting

Features:: Auto Restart

Fault Protection:: Current Limiting (Fixed), Over Temperature, Over Voltage

Operating Temperature:: -40°C ~ 150°C (TJ)

Grade:: -

Qualification:: -

Mounting Type:: Surface Mount

Supplier Device Package:: 16-SO

VND60013TR FAQ

1.How can I place an order for VND60013TR through Aetrix?

Please submit a Request for Quotation (RFQ) for VND60013TR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for VND60013TR reliable?

The price and inventory of VND60013TR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VND60013TR is usually 5 days.

3.What payment methods are accepted for VND60013TR?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VND60013TR transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for VND60013TR?

VND60013TR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your VND60013TR order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for VND60013TR?

For technical support, including VND60013TR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VND60013TR requirements.

6.How does Aetrix verify that VND60013TR is sourced from the original manufacturer or authorized distributors?

All VND60013TR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VND60013TR meets industry standards.

7.What is the process for return or replacement of VND60013TR?

All VND60013TR units undergo pre-shipment inspection (PSI). If there is an issue with VND60013TR, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The VND60013TR part is unused and in its original packaging.

Return procedure for VND60013TR:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

Tech Hub

2026-09-03 Logic Level Shifter: How to Connect 3.3V and 5V Logic Safely

A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.

2026-09-03 74HC595 vs TPIC6B595: Output Drive, Pinout, Current, and Load Selection

The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…

2026-09-01 74HC595 Pinout, Timing, Output Current, and Applications

The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…

2026-09-01 Latch vs Flip-Flop: Timing, Differences and Design Choices

A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…

2026-08-30 D Latch Circuit: Truth Table, Timing, ICs and Applications

A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …

2026-08-28 SR Latch Explained: NOR and NAND Circuits, Truth Tables, and Applications

An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…

2026-08-27 Latch Circuit: SR and D Latches, Truth Tables, Timing, and Applications

Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…

2026-08-21 What Is an LED Driver? Types, Circuits, Dimming, and Selection

An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…

2026-08-18 Operational Amplifier (Op Amp): Basics, Configurations, Feedback and Applications

Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…

2026-08-14 Jumper Cables: How to Use, Connect and Choose Them Safely

Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…