Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Home > Products > Integrated Circuits (ICs) > Power Management (PMIC) > Power Distribution Switches, Load Drivers

STMicroelectronics VND7050AJTR

Name: VND7050AJTR
Brand: STMicroelectronics
SKU: VND7050AJTR
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Compare

Part No.:: VND7050AJTR

Manufacturer:: STMicroelectronics

Category:: Power Distribution Switches, Load Drivers

Package:: 16-PowerLFSOP (0.154", 3.90mm Width)

Datasheet:: VND7050AJTR.pdf

Description:: IC PWR DRVR N-CHAN 1:1 PWRSSO16

Quantity:: RFQ Add To RFQ list

Payment:

Shipping:

Inventory:9,414

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Product details

Overview

VND7050AJTR from STMicroelectronics is a double-channel automotive smart high-side driver in PowerSSO-16 package, delivering 50 mΩ typical on-resistance per channel, 30 A current limitation, and multiplexed analog MultiSense feedback for load current, VCC supply voltage, and chip temperature. It operates from 4–28 V, supports 3 V/5 V CMOS inputs, and is AEC-Q100 qualified for signal lamp control (e.g., SAE1156, P27W, LED rear combinations).

For engineers reviewing the VND7050AJTR datasheet, VND7050AJTR pinout, VND7050AJTR application, or VND7050AJTR equivalent, this page provides verified electrical specs, diagnostic behavior under fault conditions, thermal resistance data (R_thj-amb = 25 °C/W on 4-layer PCB), and real-world design guidance for reverse-battery protection and latch-off configuration.

Technical Context

The VND7050AJTR integrates two independent VIPower® M0-7 high-side switches with configurable latch-off on overtemperature or power limitation, controlled via dedicated FaultRST pin. Its MultiSense output delivers time-multiplexed analog signals-load current (±5% accuracy), VCC (±3%), and T_CHIP (±5 °C)-using a single pin with SEL0/SEL1 addressing.

Protections include undervoltage shutdown (4 V trip, 5 V reset), 40 V transient clamp, self-limiting fast thermal transients, and detection of OFF-state open-load, short-to-VCC, and loss of ground/VCC. Standby current remains ≤0.5 µA at 25 °C with all inputs low and SEn disabled.

Key Specifications

Parameter	Value and Actual Design Meaning
VCC Range	4–28 V operating; supports full automotive battery range including cold-crank (4 V) and load-dump (40 V transient clamped)
R_ON (per channel)	50 mΩ typ @ 2 A, 25 °C; ensures <100 mV drop at 2 A, minimizing power loss and heat generation
I_LIMH	30 A typ current limit; protects against sustained overload without external fusing
I_STBY	0.5 µA max @ 25 °C; enables ultra-low-power module sleep modes in body control units
R_thj-amb	25 °C/W (JEDEC JESD51-7, 4-layer PCB); allows ~2.4 W continuous dissipation per channel at ΔT = 60 °C
MultiSense Accuracy	±5% for load current sense; enables precise closed-loop current monitoring for LED brightness regulation
AEC-Q100 Grade	Grade 0 (−40 to +150 °C junction); qualified for engine bay and headlamp ECU placement

Pinout & Package

Package: PowerSSO-16 (exposed die pad, thermally enhanced, RoHS-compliant surface-mount package with 0.65 mm pitch).

Pin/Terminal	Circuit Role	Design Meaning
VCC	Battery supply input	Accepts 4–28 V DC; clamped to 40 V during ISO 7637-2 transients; requires external reverse-battery protection network
OUTPUT0, OUTPUT1	High-side switched outputs	Drive grounded resistive/inductive/capacitive loads; each rated for 30 A peak, with integrated current limiting and thermal shutdown
GND	Power ground reference	Must be protected externally against reverse battery; connects to PCB thermal pad for heatsinking
INPUT0, INPUT1	CMOS-compatible control inputs	3 V/5 V logic compatible with hysteresis; drive internal gate drivers directly-no level-shifting needed
MultiSense	Multiplexed analog diagnostic output	Delivers proportional current for I_LOAD, V_CC, or T_CHIP; requires external 10 kΩ pull-up resistor to VCC for voltage-mode readout
SEn	Sense enable control	Active-high; disables MultiSense output in standby to reduce system leakage; enables sharing across multiple devices
SEL0, SEL1	Multiplexer address inputs	Select diagnostic mode: 00 = I_LOAD, 01 = V_CC, 10 = T_CHIP, 11 = reserved; sampled synchronously with SEn edge
FaultRST	Fault reset/latch control	Active-low; unlatches outputs after thermal or overload shutdown; held low for auto-restart mode

Key Features

Feature	Design Value
MultiSense analog diagnostics	Single-pin multiplexed sensing of load current (±5%), supply voltage (±3%), and chip temperature (±5 °C) reduces BOM count and routing complexity
Configurable latch-off	FaultRST pin enables either manual reset or auto-restart mode-critical for safety-critical lamp control where flicker must be avoided
Ultra-low standby current	≤0.5 µA at 25 °C allows integration into always-on vehicle modules without battery drain concerns
Reverse battery tolerance	Supports −0.3 V V_CC with external diode/resistor GND network-meets ISO 16750-2 requirements for automotive environments
Integrated protections	Combines undervoltage lockout, overvoltage clamp, current limitation, thermal shutdown, open-load detection, and short-to-VCC detection in one die

Applications

Automotive Signal Lamps

Body Control Modules (BCM)

Use Scenario: Driving P27W incandescent bulbs or multi-string LED rear combinations (SAE1156) in tail/brake/turn lamps.

IC Role / Device Role / Timing Role: Dual high-side switch providing independent PWM-capable channel control with real-time current feedback for thermal derating.

Use Value: Enables adaptive dimming and open-circuit fault reporting without adding external sense resistors or ADC channels.

Use Scenario: Controlling solenoids, relays, and small motors in door locks, seat adjusters, and HVAC actuators.

IC Role / Device Role / Timing Role: Smart power switch with built-in diagnostics replacing discrete MOSFET + driver + protection IC solutions.

Use Value: Reduces PCB area by >40% and eliminates 3–5 external components per channel while meeting ASIL-B functional safety prerequisites.

LED Headlamp Drivers

Engine Bay Power Distribution

Use Scenario: Managing high-brightness LED arrays in adaptive front-lighting systems (AFS) requiring precise current regulation.

IC Role / Device Role / Timing Role: High-side current source with ±5% analog sense accuracy and thermal foldback to prevent LED thermal runaway.

Use Value: Eliminates need for external shunt + op-amp + ADC chain; supports closed-loop brightness calibration over temperature.

Use Scenario: Distributing 12 V power to sensors, ECUs, and infotainment subsystems in harsh under-hood environments.

IC Role / Device Role / Timing Role: Robust power switch with reverse-battery, load-dump, and ESD immunity (4 kV HBM) for primary distribution nodes.

Use Value: Replaces mechanical fuses and relays with programmable, monitorable, and resettable electronic protection.

Equivalent & Alternatives

The following parts are listed as comparable options for similar dual-channel high-side driver applications.

Alternative Part	Technical Difference	Application Difference	Selection Advice
TPS4H160-Q1	Higher R_ON (160 mΩ), no analog MultiSense; uses digital SPI for diagnostics	Lacks analog current/voltage/temperature multiplexing; requires MCU with SPI interface and additional firmware	Preferred when digital bus communication and ASIL-D support are required over analog simplicity
BD82002FV-M	Single-channel only; lower current limit (15 A); no fault reset pin or latch-off configuration	Requires two devices for dual-channel operation; no configurable auto-restart mode	Only suitable for cost-sensitive, non-safety-critical applications where diagnostics are secondary

Compared with TPS4H160-Q1 and BD82002FV-M, the VND7050AJTR uniquely combines dual-channel integration, analog MultiSense on one pin, and hardware-configurable latch behavior-making it optimal for space-constrained, analog-centric automotive lighting modules needing minimal MCU overhead.

Availability

VND7050AJTR is available at Aetrix Electronics and suitable for automotive signal lamps, body control modules, LED headlamp drivers, and engine bay power distribution requiring stable component supply across extended temperature ranges and long production lifecycles.

Supply support for VND7050AJTR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, power ICs, sensors, and automotive-grade analog products since 1987.

The VND7050AJTR belongs to ST's VIPower® high-side driver family, engineered specifically for intelligent, protected, and diagnosable 12 V automotive load switching-targeting lighting, comfort, and chassis applications demanding AEC-Q100 compliance and field-proven reliability.

FAQ

What is the maximum continuous output current per channel?

The VND7050AJTR does not specify a fixed "continuous" current rating due to thermal dependence. At T_j = 150 °C and R_thj-amb = 25 °C/W (4-layer PCB), each channel sustains ~2.4 W dissipation, supporting ~7 A DC with 50 mΩ R_ON. For 30 A peak, pulse width must be limited per SOA curves in Section 2.5 of the datasheet.

How is MultiSense calibrated for accurate current sensing?

MultiSense delivers a proportional current (I_SENSE = K × I_OUT, K ≈ 1/200) with ±5% total error over −40 to +150 °C. Calibration is factory-trimmed; no user adjustment is needed. External 10 kΩ pull-up converts I_SENSE to voltage (e.g., 10 mA → 100 mV), readable by any 12-bit ADC with ≥10 mV LSB resolution.

Can FaultRST be left unconnected?

No. FaultRST must be actively driven: pulled high (≥2.0 V) for normal operation with latch-off, or held low (≤0.8 V) for auto-restart mode. Floating FaultRST causes undefined behavior-datasheet Table 2 specifies "Through 15 kΩ resistor to VCC" if unused, but functional designs require intentional biasing.

Does VND7050AJTR support PWM dimming of LEDs?

Yes. With turn-on/turn-off times <1 µs (typ) and no minimum off-time requirement, the device supports PWM frequencies up to 20 kHz. Its low R_ON and integrated current limiting prevent thermal stress during rapid switching, and MultiSense enables real-time current monitoring for closed-loop brightness control.

VND7050AJTR Specifications

Product attributes: Attribute value

Manufacturer:: STMicroelectronics

Package/Case:: 16-PowerLFSOP (0.154", 3.90mm Width)

Series:: VIPower™

Packaging:: Tape & Reel (TR)

Product Status:: Active

Switch Type:: General Purpose

Number of Outputs:: 2

Ratio - Input:Output:: 1:1

Output Configuration:: High Side

Output Type:: N-Channel

Interface:: On/Off

Voltage - Load:: 4V ~ 28V

Voltage - Supply (Vcc/Vdd):: Not Required

Current - Output (Max):: 21A

Rds On (Typ):: 50mOhm

Input Type:: Non-Inverting

Features:: Auto Restart, Status Flag

Fault Protection:: Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO

Operating Temperature:: -40°C ~ 150°C (TJ)

Grade:: -

Qualification:: -

Mounting Type:: Surface Mount

Supplier Device Package:: PowerSSO-16

VND7050AJTR FAQ

1.How can I place an order for VND7050AJTR through Aetrix?

Please submit a Request for Quotation (RFQ) for VND7050AJTR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for VND7050AJTR reliable?

The price and inventory of VND7050AJTR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for VND7050AJTR is usually 5 days.

3.What payment methods are accepted for VND7050AJTR?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for VND7050AJTR transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for VND7050AJTR?

VND7050AJTR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your VND7050AJTR order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for VND7050AJTR?

For technical support, including VND7050AJTR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your VND7050AJTR requirements.

6.How does Aetrix verify that VND7050AJTR is sourced from the original manufacturer or authorized distributors?

All VND7050AJTR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that VND7050AJTR meets industry standards.

7.What is the process for return or replacement of VND7050AJTR?

All VND7050AJTR units undergo pre-shipment inspection (PSI). If there is an issue with VND7050AJTR, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The VND7050AJTR part is unused and in its original packaging.

Return procedure for VND7050AJTR:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

Tech Hub

2026-09-08 Obsolete Electronic Components: How to Source and Evaluate Replacements

A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.

2026-09-07 TTL vs CMOS Logic Levels: 74HC and 74HCT Compatibility Explained

TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.

2026-09-04 Logic Level Shifter: How to Connect 3.3V and 5V Logic Safely

A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.

2026-09-03 74HC595 vs TPIC6B595: Output Drive, Pinout, Current, and Load Selection

The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…

2026-09-02 74HC595 Pinout, Timing, Output Current, and Applications

The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…

2026-09-01 Latch vs Flip-Flop: Timing, Differences and Design Choices

A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…

2026-08-30 D Latch Circuit: Truth Table, Timing, ICs and Applications

A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …

2026-08-28 SR Latch Explained: NOR and NAND Circuits, Truth Tables, and Applications

An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…

2026-08-27 Latch Circuit: SR and D Latches, Truth Tables, Timing, and Applications

Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…

2026-08-21 What Is an LED Driver? Types, Circuits, Dimming, and Selection

An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…