My Inquiry
My Account
Winbond Electronics Corporation W25Q16CVSNJG TR
- Part No.:
- W25Q16CVSNJG TR
- Manufacturer:
- Winbond Electronics Corporation
- Category:
- Memory
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
W25Q16CVSNJG TR.pdf
- Description:
- IC FLASH 16MBIT SPI/QUAD 8SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:1,439
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
W25Q16CVSNJG TR from Winbond is a 16 M-bit (2 MB) serial NOR flash memory IC supporting Standard, Dual, and Quad SPI interfaces with 104 MHz clock capability, 4 KB uniform sector architecture, and XIP-capable continuous read mode - deployed in embedded boot code storage, firmware update partitions, and parameter retention in industrial microcontroller systems.
For engineers reviewing the W25Q16CVSNJG TR datasheet, W25Q16CVSNJG TR pinout, W25Q16CVSNJG TR application, or W25Q16CVSNJG TR equivalent, key selection considerations include Quad Enable bit (QE) configuration for IO2/IO3 remapping, 2.7–3.6 V single-supply operation, 4 mA active / <1 µA power-down current, and JEDEC-compliant 64-bit unique ID for device traceability.
Technical Context
The W25Q16CVSNJG TR implements a SPI command-driven architecture with three operational modes: Standard (DI/DO), Dual (IO0/IO1), and Quad (IO0–IO3), where Quad mode requires non-volatile QE bit = 1 in Status Register-2. Its block diagram integrates a 256-byte page buffer, sector/block erase logic (4/32/64 KB), and security registers with OTP locks.
It supports full instruction set compatibility including Fast Read Quad I/O (EBh), Erase/Program Suspend (75h/7Ah), and SFDP register (5Ah) for discoverable timing and feature parameters. Write protection combines hardware (/WP, /HOLD pins) and software (BP2–BP0, TB, SEC, CMP bits) with top/bottom array control and SRP0/SRP1 lock-down.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 16 M-bit (2,097,152 bytes), organized as 8,192 × 256-byte pages |
| SPI Interface Modes | Standard (CLK, /CS, DI, DO, /WP, /HOLD), Dual I/O (IO0/IO1), Quad I/O (IO0–IO3) - QE bit required for Quad |
| Max Clock Frequency | 104 MHz (Standard/Dual/Quad); enables 416 MHz effective throughput in Quad I/O mode |
| Erase Granularity | Uniform 4 KB sectors (512 total), 32 KB blocks (32), 64 KB blocks (32), and full chip erase |
| Write Endurance & Retention | ≥100,000 program/erase cycles; ≥20 years data retention at +25°C |
| Supply Voltage | 2.7 V to 3.6 V single supply; 4 mA typical active current, <1 µA power-down current |
| Operating Temperature | –40°C to +85°C industrial grade |
Pinout & Package
W25Q16CVSNJG TR uses an 8-pin SOIC 150-mil (package code SN) with gull-wing leads, 1.27 mm pitch, and JEDEC MS-012AC compliant outline. Pin 1 is /CS; Pin 2 is DO (IO1); Pin 3 is /WP (IO2); Pin 4 is GND; Pin 5 is DI (IO0); Pin 6 is CLK; Pin 7 is /HOLD (IO3); Pin 8 is VCC.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| /CS (Pin 1) | Chip Select input | Active-low enable: high = high-Z outputs and standby current; low = active SPI communication |
| DO / IO1 (Pin 2) | Bidirectional data output/input | Standard SPI output only; Dual/Quad mode: bidirectional I/O for data transfer |
| /WP / IO2 (Pin 3) | Hardware write protect / Quad I/O line | Low-active hardware lock on status register; becomes IO2 when QE=1 (Quad mode) |
| GND (Pin 4) | Ground reference | Primary return path for VCC and all I/O signals; must be low-impedance connection |
| DI / IO0 (Pin 5) | Bidirectional data input/output | Standard SPI input only; Dual/Quad mode: bidirectional I/O for instruction/address/data |
| CLK (Pin 6) | Serial clock input | Edge-triggered timing source for all SPI operations; supports Mode 0 and Mode 3 |
| /HOLD / IO3 (Pin 7) | Hold control / Quad I/O line | Pauses ongoing SPI transaction without deselecting; becomes IO3 when QE=1 (Quad mode) |
| VCC (Pin 8) | Power supply | Single 2.7–3.6 V supply powering core, I/O, and charge pump; decoupling capacitor required |
Key Features
| Feature | Design Value |
|---|---|
| Continuous Read Mode | Enables true XIP execution with ≤8-clock instruction overhead per 24-bit address access |
| Quad SPI Support | Requires QE bit set in Status Register-2; unlocks IO2 (/WP) and IO3 (/HOLD) for 4-line data transfer |
| Security Registers | Three 256-byte OTP-lockable security registers for firmware keys or calibration data |
| JEDEC ID & Unique Serial Number | 64-bit factory-programmed unique ID accessible via 4Bh instruction; supports device-level traceability |
| Flexible Protection Scheme | Combines hardware (/WP pin) and software (BPx, TB, SEC, CMP, SRP bits) for granular 4 KB–full array lock |
Applications
| Boot Code Storage | Firmware Update Partition |
|---|---|
Use Scenario: Storing primary bootloader and initial firmware image for ARM Cortex-M or RISC-V microcontrollers during cold start. IC Role / Device Role / Timing Role: Non-volatile code storage with XIP-capable Quad SPI interface enabling direct execution without RAM copy. Use Value: Reduces BOM cost and boot latency by eliminating external parallel flash or SRAM pre-load; leverages 104 MHz Quad SPI for sub-100 ms boot time. | Use Scenario: Dedicated partition for over-the-air (OTA) firmware updates in networked industrial gateways. IC Role / Device Role / Timing Role: Field-upgradable persistent storage with atomic sector erase and suspend/resume for safe interrupt handling. Use Value: Enables robust dual-bank update schemes using 4 KB sector granularity and Erase/Program Suspend (75h/7Ah) to avoid corruption during power loss. |
| Parameter & Calibration Data | Secure Key Storage |
Use Scenario: Retaining sensor calibration coefficients, motor tuning values, and user preferences across power cycles in PLC modules. IC Role / Device Role / Timing Role: Low-power, long-retention non-volatile storage accessed infrequently via Standard SPI. Use Value: Guarantees ≥20-year data retention and >100k write cycles - sufficient for lifetime field recalibration without wear leveling. | Use Scenario: Storing cryptographic keys and secure boot certificates in medical device controllers requiring tamper resistance. IC Role / Device Role / Timing Role: Hardware-isolated OTP-locked security registers (3×256 bytes) with lock-down via SRP bits. Use Value: Prevents unauthorized read/write of keys even if main array is compromised; meets IEC 62304 Class C security requirements. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial NOR flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MX25L1606EZN-12G | Same density (16 M-bit), 104 MHz max clock, but lacks Quad Enable bit and SFDP register; uses legacy status register layout | No native Quad SPI support; limited continuous read optimization; no unique ID or security registers | Choose for legacy designs requiring pin-to-pin replacement without Quad mode or security features |
| S25FL116K0XMFI011 | 16 M-bit, 85 MHz max clock, supports Quad SPI and SFDP, but uses different QE implementation (volatile vs. non-volatile) and lacks OTP security registers | Lower throughput than W25Q16CVSNJG TR; no factory-programmed unique ID; security relies on software-only locks | Prefer when migrating from Cypress ecosystem and needing SFDP compatibility without OTP key storage |
Compared with MX25L1606EZN-12G and S25FL116K0XMFI011, the W25Q16CVSNJG TR delivers higher sustained bandwidth (416 MHz Quad I/O), factory-traceable identity (64-bit UID), and hardware-enforced security (OTP-locked registers), making it optimal for next-generation secure boot and OTA update architectures.
Availability
W25Q16CVSNJG TR is available at Aetrix Electronics and suitable for industrial control panels, medical diagnostic instruments, and automotive telematics modules requiring stable component supply, long-term lifecycle assurance, and RoHS-compliant packaging.
Supply support for W25Q16CVSNJG TR includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Winbond Electronics is a Taiwan-based semiconductor company specializing in specialty memory solutions, including SPI NOR/NAND flash, RAM, and mobile DRAM.
The W25Q series targets high-performance embedded systems requiring fast, secure, and flexible code and data storage - optimized for XIP, OTA updates, and industrial-grade reliability.
FAQ
What is the package type and lead count of W25Q16CVSNJG TR?
W25Q16CVSNJG TR uses an 8-pin SOIC 150-mil (package code SN) with gull-wing leads and 1.27 mm pitch. It is JEDEC MS-012AC compliant and measures 3.9 mm × 4.9 mm. This package is distinct from WSON, TFBGA, or PDIP variants of the W25Q16CV family and is specified in Winbond's official ordering table for the "SN" suffix.
Does W25Q16CVSNJG TR support Quad SPI mode out of the box?
No - W25Q16CVSNJG TR requires the non-volatile Quad Enable (QE) bit in Status Register-2 to be set to '1' before Quad SPI instructions (e.g., EBh, 6Bh) will function. By default, QE = 0; users must issue Write Status Register (01h) with appropriate byte value to enable IO2 (/WP) and IO3 (/HOLD) as data lines. Failure to configure QE results in unrecognized commands or standard SPI fallback.
What is the maximum clock frequency supported by W25Q16CVSNJG TR in Quad I/O mode?
W25Q16CVSNJG TR supports up to 104 MHz on the CLK pin in Quad I/O mode, delivering an effective data rate of 416 Mbps (104 MHz × 4 lines). This is confirmed in Section 2 ("Features") and Section 8.7 ("AC Electrical Characteristics") of the datasheet, with timing validated under VCC = 2.7–3.6 V and TA = –40°C to +85°C.
How many program/erase cycles does W25Q16CVSNJG TR guarantee?
W25Q16CVSNJG TR guarantees ≥100,000 program/erase cycles per sector, as stated in Section 2 ("Features") and Section 8.5 ("DC Electrical Characteristics"). This endurance applies uniformly across all 512 sectors and is validated under industrial temperature conditions with standard erase algorithms (20h, 52h, D8h).
Is the 64-bit unique ID in W25Q16CVSNJG TR factory-programmed and readable?
Yes - W25Q16CVSNJG TR includes a factory-programmed, unalterable 64-bit unique serial number accessible via the Read Unique ID Number instruction (4Bh). This ID is laser-marked during wafer sort and verified per unit; it enables secure device authentication, firmware binding, and supply chain traceability without requiring user programming.
W25Q16CVSNJG TR Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Winbond Electronics Corporation
- Series:
- SpiFlash®
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 16Mbit
- Memory Organization:
- 2M x 8
- Memory Interface:
- SPI - Quad I/O
- Clock Frequency:
- 104 MHz
- Write Cycle Time - Word, Page:
- 50µs, 3ms
- Access Time:
- -
- Voltage - Supply:
- 2.7V ~ 3.6V
- Operating Temperature:
- -40°C ~ 105°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOIC
W25Q16CVSNJG TR FAQ
1.How can I place an order for W25Q16CVSNJG TR through Aetrix?
Please submit a Request for Quotation (RFQ) for W25Q16CVSNJG TR on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for W25Q16CVSNJG TR reliable?
The price and inventory of W25Q16CVSNJG TR are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for W25Q16CVSNJG TR is usually 5 days.
3.What payment methods are accepted for W25Q16CVSNJG TR?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for W25Q16CVSNJG TR transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for W25Q16CVSNJG TR?
W25Q16CVSNJG TR orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your W25Q16CVSNJG TR order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for W25Q16CVSNJG TR?
For technical support, including W25Q16CVSNJG TR datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your W25Q16CVSNJG TR requirements.
6.How does Aetrix verify that W25Q16CVSNJG TR is sourced from the original manufacturer or authorized distributors?
All W25Q16CVSNJG TR products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that W25Q16CVSNJG TR meets industry standards.
7.What is the process for return or replacement of W25Q16CVSNJG TR?
All W25Q16CVSNJG TR units undergo pre-shipment inspection (PSI). If there is an issue with W25Q16CVSNJG TR, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The W25Q16CVSNJG TR part is unused and in its original packaging.
Return procedure for W25Q16CVSNJG TR:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
W25Q16CVSNJG TR Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
