My Inquiry
My Account
Winbond Electronics Corporation W25Q512NWBIQ
- Part No.:
- W25Q512NWBIQ
- Manufacturer:
- Winbond Electronics Corporation
- Category:
- Memory
- Package:
- 24-TBGA
- Datasheet:
-
W25Q512NWBIQ.pdf
- Description:
- IC FLASH 512MBIT SPI 24TFBGA
- Quantity:
- Payment:
- Shipping:
Inventory:2,256
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
W25Q512NW from Winbond is a 1.8V, 512M-bit (64MB) serial NOR flash memory supporting Standard/Dual/Quad SPI interfaces with up to 133MHz clock, 4KB uniform sector architecture, and hardware write protection via /WP and /HOLD pins - used for code storage, XIP execution, and firmware updates in space-constrained embedded systems.
For engineers reviewing the W25Q512NW datasheet, W25Q512NW pinout, W25Q512NW application, or W25Q512NW equivalent, key selection considerations include 1.65–1.95V supply compatibility, Quad Enable (QE) bit configuration for IO2/IO3 remapping, 4-byte addressing support, and package-specific /RESET availability in SOIC-16, TFBGA, or WLCSP variants.
Technical Context
The W25Q512NW implements a flexible SPI command set with three address modes (3-byte default, 4-byte enabled via B7h/E9h), supports true execute-in-place (XIP) operation, and uses volatile/non-volatile status register bits (BP0–BP3, TB, CMP, QE, SRP) for granular memory protection. Its block diagram integrates a 256-byte page buffer, SFDP register, and three 256-byte security registers with OTP locks.
It features dual-mode I/O functionality: IO0/IO1 serve Standard/Dual SPI, while IO0–IO3 enable Quad SPI when QE=1 (reassigning /WP→IO2 and /HOLD→IO3); /RESET is dedicated and active-low only on SOIC-16, TFBGA, and WLCSP packages - not present in 8-pad WSON.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 512 M-bit (64 MB), organized as 262,144 × 256-byte pages |
| Supply Voltage | 1.65 V to 1.95 V - enables low-power operation in battery-backed or energy-efficient designs |
| SPI Clock Frequency | Up to 133 MHz (Standard/Dual/Quad); enables 532 MB/s effective throughput in Quad I/O mode |
| Erase Granularity | Uniform 4 KB sectors (16,384 total), plus 32 KB and 64 KB blocks - supports fine-grained firmware partitioning |
| Endurance & Retention | 100,000 program/erase cycles minimum; >20 years data retention at +25°C |
| Security Features | 64-bit unique ID, SFDP register, three 256-byte OTP-lockable security registers, and individual sector lock/unlock commands |
| Operating Temperature | −40°C to +85°C - qualified for industrial-grade embedded applications |
Pinout & Package
W25Q512NW is available in four package types: 8-pin WSON 8×6 mm (E), 16-pin SOIC 300-mil (F), 24-ball TFBGA 8×6 mm (B), and 88-ball WLCSP (Y). The /RESET pin is only present in SOIC-16, TFBGA, and WLCSP packages; it is absent in WSON. Pin functions vary by package and Quad Enable state - e.g., /WP and /HOLD become IO2 and IO3 respectively when QE=1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| /CS | Chip Select Input | Active-low enable; high-impedance DO output and standby current when deasserted |
| CLK | Serial Clock Input | Edge-triggered timing source for all SPI operations (Mode 0 and Mode 3 supported) |
| DI (IO0) | Data Input / Bidirectional I/O | Primary input for Standard/Dual SPI; becomes IO0 in Quad mode when QE=1 |
| DO (IO1) | Data Output / Bidirectional I/O | Primary output for Standard/Dual SPI; becomes IO1 in Quad mode when QE=1 |
| /WP (IO2) | Write Protect Input / Bidirectional I/O | Hardware lock for status register; remapped to IO2 in Quad mode when QE=1 |
| /HOLD (IO3) | Hold Input / Bidirectional I/O | Pauses ongoing SPI transfer; remapped to IO3 in Quad mode when QE=1; absent in WSON |
| VCC | Power Supply | 1.65–1.95 V core supply; decoupling required per layout guidelines |
| GND | Ground Reference | Signal and power return path; must be low-impedance for noise immunity |
Key Features
| Feature | Design Value |
|---|---|
| Quad SPI with 133 MHz clock | Enables 532 MB/s effective read bandwidth - eliminates need for parallel flash in most boot/firmware applications |
| 4-byte addressing mode | Supports memory maps beyond 16 MB via B7h/E9h commands - essential for full 64 MB utilization |
| Erase/Program Suspend & Resume | Allows background operations (e.g., reading while erasing) - improves system responsiveness during firmware updates |
| Individual sector/block lock | Per-sector 4KB lock/unlock (36h/39h) prevents accidental overwrite of critical bootloader or calibration data |
| Security Register OTP locking | Three 256-byte registers with one-time-programmable (OTP) locks - suitable for storing cryptographic keys or device secrets |
Applications
| Boot Code Storage | Firmware Over-the-Air (OTA) Update |
|---|---|
|
Use Scenario: Storing primary bootloader and application firmware for microcontrollers with limited internal flash. IC Role / Device Role / Timing Role: Non-volatile code storage with XIP capability - executes directly from Quad SPI interface without RAM copy. Use Value: Reduces BOM cost and PCB area vs. parallel NOR flash; supports secure boot via SFDP-defined parameter tables and OTP-locked security registers. |
Use Scenario: Hosting field-upgradable firmware images in connected IoT edge devices. IC Role / Device Role / Timing Role: Dual-bank update storage - one bank active, one bank receiving new image via SPI. Use Value: Enables atomic firmware swaps using sector-level erase and program suspend/resume - ensures zero-downtime updates. |
| Industrial HMI Configuration | Automotive Telematics Log Buffer |
|
Use Scenario: Persisting UI themes, language packs, and user preferences in human-machine interface panels. IC Role / Device Role / Timing Role: Parameter and data storage with hardware write protection (/WP pin tied low) to prevent corruption during power loss. Use Value: 4KB sector granularity allows independent update of theme assets without disturbing calibration or safety-critical settings. |
Use Scenario: Cyclic logging of vehicle CAN bus diagnostics and GPS metadata in telematics control units. IC Role / Device Role / Timing Role: High-endurance data logger - leveraging 100K P/E cycles and wear-leveling-aware host firmware. Use Value: 64KB block erase and fast Quad I/O reads minimize log write latency and maximize sustained throughput under thermal constraints. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial NOR flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MX25L51245G | Same density (512Mb), 3V supply (2.7–3.6V); no /RESET pin in SOIC-8; lacks SFDP and 4-byte addressing | Not suitable for 1.8V systems or designs requiring dynamic parameter discovery or >16MB addressing | Select W25Q512NW for 1.8V operation, Quad I/O performance, and standardized SFDP compliance. |
| S25FL512S | 512Mb, 1.8V, supports HyperBus interface; higher pin count (24-pin SOIC/WSON); no /HOLD pin in standard config | Targets high-speed memory-mapped applications; incompatible with standard SPI-only controllers | Choose W25Q512NW for SPI-native designs needing minimal pin count and broad controller compatibility. |
Compared with MX25L51245G and S25FL512S, the W25Q512NW delivers superior voltage compatibility (1.65–1.95V), richer security (OTP-locked registers, 64-bit UID), and standardized configurability (SFDP), making it optimal for modern low-power, secure, and scalable embedded firmware architectures.
Availability
W25Q512NW is available at Aetrix Electronics and suitable for industrial HMI, automotive telematics, and IoT OTA update applications requiring stable component supply, long-term lifecycle assurance, and traceable sourcing.
Supply support for W25Q512NW includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Winbond Electronics is a Taiwan-based semiconductor company specializing in specialty memory solutions, including serial NOR/NAND flash and RAM products for industrial, communications, and consumer markets.
The W25Q512NW belongs to Winbond's W25Q family - designed specifically for high-performance, low-voltage embedded systems requiring robust code storage, secure firmware updates, and seamless SPI interoperability.
FAQ
What is the maximum SPI clock frequency supported by the W25Q512NW?
The W25Q512NW supports up to 133 MHz for Standard, Dual, and Quad SPI operations. In Quad I/O mode, this yields an effective data rate of 532 MB/s (133 MHz × 4), enabling high-speed firmware reads and XIP execution without external RAM buffering. This specification is guaranteed across the full −40°C to +85°C operating range and 1.65–1.95 V supply.
Does the W25Q512NW support 4-byte addressing, and how is it enabled?
Yes, the W25Q512NW supports 4-byte addressing to access its full 64 MB capacity. It is enabled by issuing the Enter 4-Byte Address Mode instruction (B7h); the setting persists until Exit 4-Byte Address Mode (E9h) is executed or power is cycled. The ADP bit in Status Register-3 controls power-up default addressing mode and is non-volatile.
Is the /RESET pin available on all W25Q512NW packages?
No - the dedicated /RESET pin is only present on SOIC-16 (Package Code F), TFBGA (Package Code B), and WLCSP (Package Code Y) variants. It is absent in the 8-pad WSON (Package Code E) package. When present, /RESET is active-low and forces the device into power-on reset state regardless of internal operation.
How does Quad Enable (QE) affect pin functionality on the W25Q512NW?
When the Quad Enable (QE) bit in Status Register-2 is set to 1, the /WP pin becomes IO2 and the /HOLD pin becomes IO3, enabling full Quad SPI operation. If QE=0, those pins retain their hardware protection functions. QE can be set via Write Status Register-2 (31h) and is non-volatile unless locked by SRP/SRL bits.
What security mechanisms does the W25Q512NW provide for firmware protection?
The W25Q512NW provides layered security: hardware write protection via /WP and /HOLD pins, software-controlled block/sector locking (36h/39h), OTP-locked 256-byte security registers, 64-bit unique ID, and SFDP-based parameter discovery. These features collectively prevent unauthorized firmware modification, cloning, or reverse engineering in production devices.
W25Q512NWBIQ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Winbond Electronics Corporation
- Series:
- SpiFlash®
- Package/Case:
- 24-TBGA
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 512Mbit
- Memory Organization:
- 64M x 8
- Memory Interface:
- SPI - Quad I/O, QPI, DTR
- Clock Frequency:
- 133 MHz
- Write Cycle Time - Word, Page:
- 3ms
- Access Time:
- 6 ns
- Voltage - Supply:
- 1.65V ~ 1.95V
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 24-TFBGA (6x8)
W25Q512NWBIQ FAQ
1.How can I place an order for W25Q512NWBIQ through Aetrix?
Please submit a Request for Quotation (RFQ) for W25Q512NWBIQ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for W25Q512NWBIQ reliable?
The price and inventory of W25Q512NWBIQ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for W25Q512NWBIQ is usually 5 days.
3.What payment methods are accepted for W25Q512NWBIQ?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for W25Q512NWBIQ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for W25Q512NWBIQ?
W25Q512NWBIQ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your W25Q512NWBIQ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for W25Q512NWBIQ?
For technical support, including W25Q512NWBIQ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your W25Q512NWBIQ requirements.
6.How does Aetrix verify that W25Q512NWBIQ is sourced from the original manufacturer or authorized distributors?
All W25Q512NWBIQ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that W25Q512NWBIQ meets industry standards.
7.What is the process for return or replacement of W25Q512NWBIQ?
All W25Q512NWBIQ units undergo pre-shipment inspection (PSI). If there is an issue with W25Q512NWBIQ, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The W25Q512NWBIQ part is unused and in its original packaging.
Return procedure for W25Q512NWBIQ:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
W25Q512NWBIQ Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
