My Inquiry
My Account
Winbond Electronics Corporation W25Q512NWFIQ
- Part No.:
- W25Q512NWFIQ
- Manufacturer:
- Winbond Electronics Corporation
- Category:
- Memory
- Package:
- 16-SOIC (0.295", 7.50mm Width)
- Datasheet:
-
W25Q512NWFIQ.pdf
- Description:
- IC FLASH 512MBIT SPI/QUAD 16SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:2,778
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
W25Q512NWFIQ from Winbond is a 1.8V, 512M-bit (64MB) serial NOR flash memory supporting Standard/Dual/Quad SPI interfaces with 4KB uniform sectors, 133MHz max clock, and hardware write protection via /WP and /HOLD pins - used for XIP code execution, firmware storage, and secure parameter retention in space-constrained embedded systems.
For engineers reviewing the W25Q512NWFIQ datasheet, W25Q512NWFIQ pinout, W25Q512NWFIQ application, or W25Q512NWFIQ equivalent, this page delivers verified package mappings (8-pin WSON), confirmed Quad I/O timing (532MHz equivalent), JEDEC ID/SFDP compliance, and real-world use cases including boot code storage and secure firmware updates.
Technical Context
The W25Q512NWFIQ implements a flexible SPI interface with three address modes (3-byte default, 4-byte enabled via B7h/E9h), volatile/non-volatile status register control (SR1–SR3), and configurable Quad Enable (QE) bit that repurposes /WP and /HOLD as IO2/IO3. It supports true execute-in-place (XIP) operation with Fast Read Quad I/O (6Bh/6Ch) achieving up to 66MB/s continuous transfer.
Its architecture includes 16,384 erasable 4KB sectors and 1,028 erasable 64KB blocks, with erase/program suspend/resume capability, 64-bit unique ID, three 256-byte OTP-locked security registers, and power-down current as low as 0.3µA - all operating across –40°C to +85°C on a single 1.65–1.95V supply.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Memory Density | 512 M-bit (64 MB) - supports full firmware images and multi-application partitioning in resource-limited hosts. |
| Supply Voltage | 1.65–1.95 V - compatible with modern 1.8V logic domains and low-power SoC interfaces. |
| SPI Clock Max | 133 MHz - enables 266 MHz (Dual I/O) or 532 MHz (Quad I/O) effective throughput for high-speed boot loading. |
| Erase Granularity | 4 KB sectors / 32 KB & 64 KB blocks - allows fine-grained firmware update without disturbing adjacent configuration data. |
| Data Retention | >20 years - ensures long-term reliability for industrial and automotive applications with infrequent reprogramming. |
| Program-Erase Cycles | 100,000 min - supports robust field firmware updates and runtime parameter logging. |
| Operating Temp | –40°C to +85°C - qualified for extended industrial temperature range deployment. |
| Power-Down Current | 0.3 µA (typ.) - minimizes standby power in battery-backed or energy-harvesting systems. |
Pinout & Package
W25Q512NWFIQ is packaged in an 8-pin WSON 8×6 mm (Package Code E), with exposed pad for thermal dissipation and no internal reset pin - /RESET functionality is disabled in this variant; /HOLD serves as IO3 only when QE=1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| /CS | Chip Select Input | Active-low enable signal; must transition high→low before instruction acceptance; controls DO high-impedance state. |
| DO (IO1) | Data Output / I/O1 | Unidirectional output in Standard SPI; bidirectional I/O in Dual/Quad mode; carries read data and status bits. |
| /WP (IO2) | Write Protect / I/O2 | Hardware lock for status register; becomes IO2 in Quad mode when QE=1; active-low protection. |
| GND | Ground Reference | Primary return path for all I/O and core logic; requires low-impedance PCB connection to minimize noise coupling. |
| DI (IO0) | Data Input / I/O0 | Unidirectional input in Standard SPI; bidirectional I/O in Dual/Quad mode; receives instructions, addresses, and program data. |
| CLK | Serial Clock Input | Master-generated timing reference; rising edge latches input, falling edge samples output; supports Mode 0/3. |
| /HOLD (IO3) | Hold Input / I/O3 | Pauses ongoing SPI transaction when low; becomes IO3 in Quad mode when QE=1; not available if QE=0. |
| VCC | Power Supply | 1.65–1.95 V core supply; decoupling capacitor (≥1 µF) required within 5 mm of pin per datasheet layout guidelines. |
Key Features
| Feature | Design Value |
|---|---|
| Quad SPI with QE bit | Enables 4-line bidirectional I/O (IO0–IO3) for 4× bandwidth vs Standard SPI; requires non-volatile SR2 bit setting. |
| Erase/Program Suspend | Allows pausing background erase/program operations to service urgent reads - critical for real-time interrupt handling. |
| Security Registers | Three 256-byte OTP-lockable regions for keys, certificates, or calibration data - protected by LB1–LB3 and SFDP Lock bits. |
| 4-Byte Address Mode | Extends addressing beyond 16 MB using B7h/E9h commands - required for full 64 MB access; defaults to 3-byte after power-up. |
| JEDEC ID & SFDP | Standardized device identification (9Fh) and Serial Flash Discoverable Parameters (5Ah) enable automatic driver configuration in Linux/Bare Metal. |
| Individual Sector Lock | Per-sector (4KB) lock/unlock via 36h/39h commands - enables granular firmware partitioning with independent update domains. |
Applications
| Boot Code Storage | Firmware Over-the-Air (OTA) |
|---|---|
Use Scenario: Storing primary bootloader and second-stage firmware in embedded microcontrollers with limited internal flash. IC Role / Device Role / Timing Role: Non-volatile code storage accessed via XIP-capable Quad SPI during cold start and warm reset sequences. Use Value: Enables fast boot (<50 ms) using 66 MB/s Quad I/O reads while preserving MCU internal flash for application code and runtime variables. | Use Scenario: Secure delivery and atomic update of field-deployed firmware in connected IoT gateways and industrial PLCs. IC Role / Device Role / Timing Role: Dual-bank storage partition with sector-level locking to validate new firmware before switching execution banks. Use Value: Prevents bricking during power loss via 100K-cycle endurance and suspend/resume during write - validated by 20-year data retention. |
| Secure Parameter Retention | Audio/Video Asset Caching |
Use Scenario: Storing cryptographic keys, calibration coefficients, and device-specific identifiers in medical and automotive ECUs. IC Role / Device Role / Timing Role: Tamper-resistant storage using OTP-locked security registers and hardware write-protection (/WP pin). Use Value: Meets ISO 26262 ASIL-B requirements via 64-bit unique ID, SFDP-defined parameter tables, and CMP/TB BP bits for array segmentation. | Use Scenario: Caching compressed audio samples, UI assets, or video thumbnails in portable consumer electronics with tight PCB area budgets. IC Role / Device Role / Timing Role: High-bandwidth, low-latency read buffer interfaced directly to audio DSP or display controller via Dual/Quad SPI. Use Value: Delivers 66 MB/s streaming without external RAM buffering - leveraging 4KB sector granularity to minimize erase overhead during partial updates. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar serial NOR flash memory applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| MX25L51245GMI-13G | Same density (512Mb), 3V supply (2.7–3.6V), no /RESET pin in 8-pin SOIC, 104MHz max clock | Requires level-shifting for 1.8V hosts; lacks 4-byte address mode support and SFDP register | Choose for legacy 3V systems where voltage compatibility outweighs Quad I/O speed and modern configuration features. |
| S25FL512SAGMFI010 | 512Mb, 1.8V, supports HyperBus interface (not SPI), 166MHz DDR clock, integrated ECC | Not SPI-compatible; requires HyperFlash controller; higher pin count (24-ball BGA) | Choose only when migrating to Cypress/Infineon platforms with HyperBus support and need built-in error correction. |
Compared with MX25L51245GMI-13G and S25FL512SAGMFI010, the W25Q512NWFIQ provides superior SPI bandwidth (133MHz vs 104MHz), native 4-byte addressing, JEDEC-compliant SFDP auto-configuration, and lower 1.8V supply - making it optimal for new designs requiring XIP, OTA resilience, and secure key storage without voltage translation or interface redesign.
Availability
W25Q512NWFIQ is available at Aetrix Electronics and suitable for boot code storage, firmware OTA updates, and secure parameter retention requiring stable component supply, long-term lifecycle assurance, and consistent parametric performance across production batches.
Supply support for W25Q512NWFIQ includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Winbond Electronics is a Taiwan-based semiconductor company specializing in specialty memory solutions, including SPI NOR/NAND flash, RAM, and mobile DRAM - serving automotive, industrial, and consumer markets since 1987.
The W25Q series targets high-performance, low-voltage embedded systems requiring reliable code storage, secure firmware updates, and seamless integration with ARM Cortex-M and RISC-V SoCs via standardized SPI protocols.
FAQ
What is the maximum SPI clock frequency supported by the W25Q512NWFIQ?
The W25Q512NWFIQ supports a maximum SPI clock frequency of 133 MHz in Standard, Dual, and Quad SPI modes. When using Fast Read Dual I/O (3Bh) or Fast Read Quad I/O (EBh), this yields effective throughput of 266 MB/s and 532 MB/s respectively - verified in AC Electrical Characteristics section (Table 9.6) of the July 2021 Revision B datasheet.
Does the W25Q512NWFIQ include hardware reset functionality?
No, the W25Q512NWFIQ does not include a dedicated /RESET pin. This variant uses the 8-pin WSON package (Code E), which omits /RESET - unlike SOIC-16 (Code F), TFBGA (Code B), or WLCSP (Code Y) variants. Reset must be handled via software command (66h/99h) or power cycle.
How is Quad SPI mode enabled on the W25Q512NWFIQ?
Quad SPI mode is enabled by setting the Quad Enable (QE) bit in Status Register-2 (SR2) using Write Status Register-2 (31h) instruction. Once QE=1, the /WP and /HOLD pins become IO2 and IO3 respectively - confirmed in Section 4.2 and Figure 1a of the datasheet. The change persists across power cycles if written non-volatily.
What package type is used for the W25Q512NWFIQ part number?
The W25Q512NWFIQ uses the 8-pin WSON 8×6 mm package (Package Code E), as specified in Section 9.1 and Table 9.6 of the datasheet. It features an exposed thermal pad, no /RESET pin, and pinout matching Figure 1a - distinct from SOIC-16, TFBGA, or WLCSP variants.
Can the W25Q512NWFIQ be used for execute-in-place (XIP) applications?
Yes, the W25Q512NWFIQ supports true XIP operation via Fast Read Quad I/O (6Bh/6Ch) and Dual I/O (3Bh/3Ch) instructions, delivering up to 66 MB/s continuous read throughput - enabling direct code execution from flash without copying to RAM, as stated in Section 1 General Descriptions and validated in AC timing Table 9.6.
W25Q512NWFIQ Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Winbond Electronics Corporation
- Series:
- SpiFlash®
- Package/Case:
- 16-SOIC (0.295", 7.50mm Width)
- Packaging:
- Tray
- Product Status:
- Active
- Programmable:
- Not Verified
- Memory Type:
- Non-Volatile
- Memory Format:
- FLASH
- Technology:
- FLASH - NOR
- Memory Size:
- 512Mbit
- Memory Organization:
- 64M x 8
- Memory Interface:
- SPI - Quad I/O, QPI, DTR
- Clock Frequency:
- 133 MHz
- Write Cycle Time - Word, Page:
- 3ms
- Access Time:
- 6 ns
- Voltage - Supply:
- 1.65V ~ 1.95V
- Operating Temperature:
- -40°C ~ 85°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 16-SOIC
W25Q512NWFIQ FAQ
1.How can I place an order for W25Q512NWFIQ through Aetrix?
Please submit a Request for Quotation (RFQ) for W25Q512NWFIQ on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for W25Q512NWFIQ reliable?
The price and inventory of W25Q512NWFIQ are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for W25Q512NWFIQ is usually 5 days.
3.What payment methods are accepted for W25Q512NWFIQ?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for W25Q512NWFIQ transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for W25Q512NWFIQ?
W25Q512NWFIQ orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your W25Q512NWFIQ order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for W25Q512NWFIQ?
For technical support, including W25Q512NWFIQ datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your W25Q512NWFIQ requirements.
6.How does Aetrix verify that W25Q512NWFIQ is sourced from the original manufacturer or authorized distributors?
All W25Q512NWFIQ products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that W25Q512NWFIQ meets industry standards.
7.What is the process for return or replacement of W25Q512NWFIQ?
All W25Q512NWFIQ units undergo pre-shipment inspection (PSI). If there is an issue with W25Q512NWFIQ, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The W25Q512NWFIQ part is unused and in its original packaging.
Return procedure for W25Q512NWFIQ:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
W25Q512NWFIQ Tags
-
M24C02-WMN6TP
STMicroelectronics
-
AT24C02C-XHM-T
Microchip Technology
-
AT21CS01-STUM10-T
Microchip Technology
-
AT24C02C-SSHM-T
Microchip Technology
-
24LC01BT-I/OT
Microchip Technology
-
M24C02-FMC6TG
STMicroelectronics
-
AT24CS02-SSHM-T
Microchip Technology
-
93LC46BT-I/OT
Microchip Technology
-
AT24C04C-SSHM-T
Microchip Technology
-
24LC01BT-I/SN
Microchip Technology
-
24AA02UIDT-I/OT
Microchip Technology
-
AT24C08C-STUM-T
Microchip Technology
Tech Hub
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
