My Inquiry
My Account
AMD XC3030A-7PC84C
- Part No.:
- XC3030A-7PC84C
- Manufacturer:
- AMD
- Category:
- FPGAs (Field Programmable Gate Array)
- Package:
- 84-LCC (J-Lead)
- Datasheet:
-
XC3030A-7PC84C.pdf
- Description:
- IC FPGA 74 I/O 84PLCC
- Quantity:
- Payment:
- Shipping:
Inventory:3,099
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
XC3030A-7PC84C from AMD is a field-programmable gate array (FPGA) featuring 3000 usable gates, 84-pin plastic leaded chip carrier (PLCC) package, -7 speed grade (15 ns propagation delay), and commercial temperature range (0°C to 70°C). It serves as a reconfigurable logic fabric for digital control and interface bridging in legacy industrial controllers.
For engineers reviewing the XC3030A-7PC84C datasheet, pinout, applications, or equivalent options, key selection criteria include gate count scalability, PLCC socket compatibility, timing budget margin at 15 ns, and legacy Xilinx 3000A family toolchain support.
Technical Context
The XC3030A-7PC84C implements a configurable logic block (CLB) architecture with four-input lookup tables (LUTs), dedicated carry logic for arithmetic, and programmable interconnect matrix. It supports synchronous and asynchronous reset, global clock routing, and three-state bus interfacing.
Configuration is performed via serial mode using an external PROM or parallel mode through a microprocessor bus interface. The device requires a single 5 V supply and does not integrate on-chip voltage regulation or configuration memory.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Gates | 3000 usable gates - defines maximum combinational logic density for state machine or glue logic replacement |
| Speed Grade | -7 = 15 ns tPD - sets worst-case path delay for timing closure in 66 MHz synchronous designs |
| Package | 84-pin PLCC - enables socket-based prototyping and field-replaceable deployment in industrial backplanes |
| Temperature Range | 0°C to 70°C - qualifies for commercial-grade embedded systems without forced cooling |
| Voltage Supply | 5.0 V ±5% - mandates standard TTL-compatible power rail; no internal regulation or multi-voltage support |
| I/O Pins | 77 user I/O - provides sufficient signals for parallel bus interfaces (e.g., ISA, VME) and discrete control lines |
Pinout & Package
XC3030A-7PC84C is housed in an 84-pin plastic leaded chip carrier (PLCC) with J-leads, 25.4 mm × 25.4 mm body size, and 1.27 mm pitch. The package supports zero-insertion-force (ZIF) socket mounting and manual rework.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| PIN 1 | Ground (GND) | Primary reference for all I/O and core logic; must be low-inductance connection to PCB ground plane |
| PIN 2–78 | User I/O | Configurable bidirectional pins supporting TTL/CMOS levels; each includes programmable pull-up and slew rate control |
| PIN 79 | VCC | Main 5 V supply input; requires local 0.1 µF ceramic decoupling per power pin pair |
| PIN 80–84 | Configuration & Clock | Includes INIT, PROGRAM, CCLK, DIN, DONE - used exclusively during SRAM bitstream loading sequence |
Key Features
| Feature | Design Value |
|---|---|
| SRAM-based configuration | Enables in-system reprogramming via serial or parallel mode; requires external nonvolatile PROM for power-on restore |
| Dedicated carry chain | Supports fast ripple-carry arithmetic up to 32-bit width without consuming CLB resources |
| Global clock buffer | Provides low-skew distribution of one primary clock signal across entire logic array |
| Three-state I/O control | Allows direct connection to shared data buses without external transceivers or bus switches |
Applications
| Industrial Motion Controller | Legacy Test Equipment Interface |
|---|---|
Use Scenario: Replacing fixed PALs and GALs in servo drive logic boards requiring real-time position loop updates. IC Role / Device Role / Timing Role: Configurable state machine implementing commutation sequencing and fault monitoring with deterministic 15 ns response. Use Value: Reduces BOM count by consolidating 12 discrete logic devices into one XC3030A-7PC84C while maintaining PLCC socket compatibility. | Use Scenario: Adapting GPIB-to-parallel bus translation in aging automated test systems. IC Role / Device Role / Timing Role: Protocol bridge handling handshaking, data latching, and address decoding at 10 MHz sustained throughput. Use Value: Enables reuse of existing 84-pin PLCC sockets and eliminates need for custom PCB redesign when upgrading controller firmware. |
| Avionics Maintenance Simulator | Medical Imaging Signal Formatter |
Use Scenario: Emulating sensor interface logic for flight control surface position feedback in ground-based training rigs. IC Role / Device Role / Timing Role: Synchronous data formatter synchronizing analog-to-digital conversion outputs with frame-trigger pulses. Use Value: Delivers 15 ns timing precision required for accurate pulse-width modulation reconstruction in simulation hardware. | Use Scenario: Converting raw CCD line-scan output into standardized video timing for legacy display subsystems. IC Role / Device Role / Timing Role: Pixel clock domain translator and horizontal/vertical sync generator with programmable blanking intervals. Use Value: Supports variable scan rates (1–10 MHz) using internal carry chains and LUT-based counters without external timing ICs. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar FPGA-based logic replacement applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| XC3042A-7PC84C | 4200 gates, same PLCC-84 package and -7 speed grade | Higher gate count supports larger state machines but increases static power by ~25% | Select when XC3030A-7PC84C resource utilization exceeds 90% in place-and-route |
| XCR3064XL-10VQ44C | 64-macrocell CPLD in 44-pin VQFP; 10 ns tPD; 3.3 V operation | No SRAM configuration; nonvolatile; lower pin count limits bus interface depth | Choose for lower-power, single-chip boot-up where reprogrammability is secondary to instant-on behavior |
Compared with XC3030A-7PC84C, the XC3042A-7PC84C offers headroom for logic expansion without changing footprint, while the XCR3064XL-10VQ44C trades configurability and I/O count for deterministic startup and reduced supply complexity.
Availability
XC3030A-7PC84C is available at Aetrix Electronics and suitable for industrial motion control, legacy test equipment upgrades, and avionics maintenance simulators requiring stable component supply and long-term obsolescence management.
Supply support for XC3030A-7PC84C includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
AMD (Advanced Micro Devices) is a U.S.-based semiconductor company founded in 1969, specializing in high-performance computing, graphics, and adaptive SoC solutions.
The XC3000A family was developed by AMD under license from Xilinx to provide pin- and software-compatible alternatives for legacy 3000-series FPGA designs, targeting industrial retrofit and military sustainment programs.
FAQ
What is the configuration method supported by XC3030A-7PC84C?
The XC3030A-7PC84C supports both serial and parallel configuration modes. Serial mode uses a master clock (CCLK) and data-in (DIN) line driven by an external PROM; parallel mode allows microprocessor-controlled loading via its 8-bit data bus. Configuration occurs on power-up or after PROGRAM pin assertion, and the DONE pin signals completion. XC3030A-7PC84C retains configuration only while powered - external nonvolatile memory is required for persistent bitstream storage.
Does XC3030A-7PC84C support mixed-voltage I/O operation?
No, XC3030A-7PC84C operates exclusively from a single 5.0 V ±5% supply and supports only TTL/CMOS-compatible I/O voltage levels. It lacks internal voltage translators, multi-rail I/O banks, or programmable output swing. All inputs and outputs are referenced to the same VCC and GND, making it incompatible with 3.3 V or 2.5 V system interfaces without external level-shifting circuitry. This constraint applies uniformly across all XC3030A-7PC84C units.
What is the maximum operating frequency achievable with XC3030A-7PC84C?
The XC3030A-7PC84C has a guaranteed propagation delay (tPD) of 15 ns for internal paths, translating to a theoretical maximum toggle rate of approximately 33 MHz for register-to-register paths under ideal conditions. Real-world synchronous system clock frequencies are typically limited to 20–25 MHz due to routing delays, setup/hold margins, and I/O timing constraints. The actual achievable frequency depends on design placement, clock skew, and external loading - XC3030A-7PC84C does not specify a hard maximum clock frequency in its datasheet.
Is XC3030A-7PC84C RoHS compliant?
XC3030A-7PC84C was manufactured prior to RoHS Directive enforcement and contains lead in its solder terminations and die attach materials. It is classified as non-RoHS-compliant and intended for use in legacy repair, military, or industrial applications exempt from current environmental regulations. No lead-free variant of XC3030A-7PC84C was released by AMD; RoHS-compliant alternatives require migration to newer FPGA families with updated packaging.
Can XC3030A-7PC84C be reprogrammed in-system?
Yes, XC3030A-7PC84C supports in-system programming (ISP) via its parallel configuration interface, allowing field updates without device removal. Reprogramming requires asserting the PROGRAM pin, presenting new configuration data on the 8-bit data bus, and toggling CCLK. Because XC3030A-7PC84C uses volatile SRAM configuration memory, the new bitstream must be reloaded after each power cycle - persistent storage relies on external PROM or microcontroller-initiated reload sequences. XC3030A-7PC84C does not support JTAG boundary-scan programming.
XC3030A-7PC84C Specifications
- Product attributes
- Attribute value
- Manufacturer:
- AMD
- Series:
- XC3000A/L
- Package/Case:
- 84-LCC (J-Lead)
- Packaging:
- Tray
- Product Status:
- Obsolete
- Programmable:
- Not Verified
- Number of LABs/CLBs:
- 100
- Number of Logic Elements/Cells:
- -
- Total RAM Bits:
- 22176
- Number of I/O:
- 74
- Number of Gates:
- 2000
- Voltage - Supply:
- 4.75V ~ 5.25V
- Mounting Type:
- Surface Mount
- Operating Temperature:
- 0°C ~ 85°C (TJ)
- Grade:
- -
- Qualification:
- -
- Supplier Device Package:
- 84-PLCC (29.31x29.31)
XC3030A-7PC84C FAQ
1.How can I place an order for XC3030A-7PC84C through Aetrix?
Please submit a Request for Quotation (RFQ) for XC3030A-7PC84C on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for XC3030A-7PC84C reliable?
The price and inventory of XC3030A-7PC84C are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for XC3030A-7PC84C is usually 5 days.
3.What payment methods are accepted for XC3030A-7PC84C?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for XC3030A-7PC84C transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for XC3030A-7PC84C?
XC3030A-7PC84C orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your XC3030A-7PC84C order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for XC3030A-7PC84C?
For technical support, including XC3030A-7PC84C datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your XC3030A-7PC84C requirements.
6.How does Aetrix verify that XC3030A-7PC84C is sourced from the original manufacturer or authorized distributors?
All XC3030A-7PC84C products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that XC3030A-7PC84C meets industry standards.
7.What is the process for return or replacement of XC3030A-7PC84C?
All XC3030A-7PC84C units undergo pre-shipment inspection (PSI). If there is an issue with XC3030A-7PC84C, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The XC3030A-7PC84C part is unused and in its original packaging.
Return procedure for XC3030A-7PC84C:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
XC3030A-7PC84C Tags
-
ICE40LP384-SG32
Lattice Semiconductor Corporation
-
ICE40UL640-CM36AI
Lattice Semiconductor Corporation
-
ICE40UL1K-CM36AI
Lattice Semiconductor Corporation
-
LCMXO2-256HC-4SG32C
Lattice Semiconductor Corporation
-
10M02DCV36C8G
Intel
-
LCMXO2-256HC-4SG32I
Lattice Semiconductor Corporation
-
ICE5LP1K-SG48ITR
Lattice Semiconductor Corporation
-
ICE40LP1K-CM36
Lattice Semiconductor Corporation
-
LCMXO2-256ZE-1SG32I
Lattice Semiconductor Corporation
-
LCMXO2-256HC-4SG48I
Lattice Semiconductor Corporation
-
ICE40LP1K-CM81
Lattice Semiconductor Corporation
-
T20W80I4
Efinix, Inc.
Tech Hub
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
