My Inquiry
My Account
Diodes Incorporated ZXMS6005DN8-13
- Part No.:
- ZXMS6005DN8-13
- Manufacturer:
- Diodes Incorporated
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
ZXMS6005DN8-13.pdf
- Description:
- IC PWR DRIVER N-CHAN 1:1 8SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:4,712
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ZXMS6005DN8-13 from Diodes Incorporated is a dual-channel, 60V N-channel self-protected low-side IntelliFET MOSFET in SO-8 package, featuring 200mΩ RDS(ON), 1.8A nominal load current at 5V input, and integrated active clamp overvoltage protection (VDS(AZ) = 60–70V). It serves as a rugged, logic-level–driven power switch for microcontroller-driven lamp, motor, relay, and solenoid loads in harsh industrial environments.
For engineers reviewing the ZXMS6005DN8-13 datasheet, ZXMS6005DN8-13 pinout, ZXMS6005DN8-13 application, or ZXMS6005DN8-13 equivalent, key selection criteria include dual-channel isolation, thermal shutdown with auto-restart, short-circuit protection with clamping energy of 120mJ, and compatibility with 3.3V/5V MCU I/O without external gate drivers.
Technical Context
The ZXMS6005DN8-13 integrates two electrically isolated low-side switching channels, each with independent overcurrent, overtemperature, and active-clamp overvoltage protection. Its logic-level input (VIH = 3V min) enables direct drive from 3.3V/5V microcontrollers, while linear-mode capability allows safe operation under in-rush conditions without triggering current limit prematurely.
Protection circuitry deactivates below ~1V VDS to minimize conduction loss, letting thermal limits-not protection thresholds-define maximum DC current. The device sustains 120mJ unclamped inductive energy (EAS) and delivers 6A pulsed drain current at 5V input, with thermal resistance RθJA = 81°C/W on optimized PCB layout.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS | 60V continuous - supports 24V DC systems with margin against transients and inductive kickback |
| RDS(ON) | 150–250 mΩ @ 5V/VIN - enables <1.2W conduction loss at 1.8A, reducing heatsink need |
| ID (continuous) | 1.8A @ VIN = 5V, TA = +25°C - sufficient for driving 12–24V lamps, small DC motors, and solenoids |
| EAS | 120mJ - withstands inductive energy from relay coils and brushed motor commutation without external snubbers |
| VDS(AZ) | 60–70V active clamp - clamps voltage during inductive turn-off, eliminating need for external TVS diodes |
| TJ range | −40°C to +150°C - suitable for under-hood automotive peripherals and industrial control cabinets |
| ESD rating | HBM 4kV, CDM 1kV - robust enough for manual handling and board-level assembly without special ESD controls |
Pinout & Package
Package: SO-8, surface-mount, lead-free, RoHS-compliant molded plastic case (UL 94V-0), 79.1mg weight, moisture sensitivity level 1.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| IN1 | Channel 1 logic input | Accepts 3.3V/5V CMOS-compatible signal; internal ESD protection and threshold logic (VIN(TH) = 0.7–1.5V) |
| S1 | Channel 1 source | Low-side return path; tied to system ground; body diode anode for inductive flyback |
| D1 | Channel 1 drain | Switched high-current output; connects to load cathode or low-side of inductive/resistive load |
| IN2 | Channel 2 logic input | Independent of IN1; enables dual-load control with single IC footprint |
| S2 | Channel 2 source | Separate ground return for Channel 2; electrically isolated from S1 per datasheet functional block |
| D2 | Channel 2 drain | Second switched output; supports fully independent load control without crosstalk |
| VSS | Common substrate reference | Internal connection to both sources; must be connected to system ground for proper protection operation |
| GND | Power ground | Thermal and electrical reference for all protection circuits; ties to PCB ground plane for RθJA = 81°C/W |
Key Features
| Feature | Design Value |
|---|---|
| Dual isolated channels | Enables independent control of two loads (e.g., forward/reverse motor windings or dual lamps) without shared failure modes |
| Active clamp overvoltage protection | Clamps VDS to ≤70V during inductive turn-off, eliminating external TVS diodes and saving board space |
| Auto-restart thermal shutdown | Shuts down at TJ ≥ +150°C and resumes after cooldown, preventing latch-up and enabling fault recovery in sealed enclosures |
| Short-circuit protection with current limiting | Limits peak ID to 3.3–7A depending on VIN, sustaining faults without destruction while allowing safe restart |
| Logic-level compatible input | Operates reliably with 3.3V µC outputs (VIH ≥ 3V), removing need for level-shifting or gate-driver ICs |
Applications
| Lamp Driver | Motor Driver |
|---|---|
|
Use Scenario: Switching 12V/24V incandescent or LED lamps in vehicle lighting or industrial panel indicators. IC Role / Device Role / Timing Role: Low-side load switch with in-rush current tolerance and thermal resilience during repeated on/off cycling. Use Value: Withstands 120mJ inductive energy and auto-restarts after thermal overload-eliminates lamp-burnout failures caused by filament surge currents. |
Use Scenario: Driving small brushed DC motors (e.g., HVAC actuators, valve positioners) in 24V industrial control systems. IC Role / Device Role / Timing Role: Dual-channel low-side driver enabling bidirectional control or independent actuator zones. Use Value: Integrated short-circuit and overtemperature protection prevents MOSFET destruction during motor stall or jam conditions. |
| Relay Driver | Solenoid Driver |
|
Use Scenario: Replacing electromechanical relays in programmable logic controllers (PLCs) for discrete I/O modules. IC Role / Device Role / Timing Role: Solid-state replacement with µC-compatible input and built-in flyback energy absorption. Use Value: Active clamp eliminates external diode, reducing BOM count; SO-8 footprint saves >50% board area vs. relay + driver combo. |
Use Scenario: Controlling fuel injectors, pneumatic valves, or locking solenoids in automotive body electronics and factory automation. IC Role / Device Role / Timing Role: High-energy pulse switch with fast turn-on (<6µs) and controlled fall time (19µs) for precise timing. Use Value: 6A pulsed current capability ensures reliable solenoid pull-in even at cold temperatures and low battery voltage. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-channel protected low-side switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Infineon BTS7004-1EPP | Single-channel, higher RDS(ON) (300mΩ), no active clamp (requires external TVS), 40V VDS | Requires two devices for dual loads; limited to ≤40V systems; needs external protection components | Choose when cost is primary and voltage margin is acceptable; avoid for 60V transient-prone environments |
| STMicroelectronics VND5E025AKTR-E | Dual-channel, 41V VDS, 25mΩ RDS(ON), no active clamp, lower EAS (30mJ) | Better conduction efficiency but lacks 120mJ clamping; requires external flyback diode for inductive loads | Prefer for low-loss 24V resistive loads; not recommended for high-energy inductive switching without added protection |
Compared with BTS7004-1EPP and VND5E025AKTR-E, the ZXMS6005DN8-13 uniquely combines 60V rating, integrated active clamp, and dual-channel isolation in one SO-8 package-making it optimal for space-constrained, high-transient industrial and automotive body applications where protection integration reduces design risk and bill-of-materials complexity.
Availability
ZXMS6005DN8-13 is available at Aetrix Electronics and suitable for lamp driver, motor driver, and solenoid driver applications requiring stable component supply, long-term lifecycle support, and consistent performance across temperature extremes.
Supply support for ZXMS6005DN8-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-reliability power management, signal integrity, and protection solutions for industrial, automotive, and consumer markets.
The ZXMS6005DN8-13 belongs to Diodes' IntelliFET™ family-engineered specifically for ruggedized, microcontroller-driven power switching in harsh environments where standard MOSFETs lack integrated fault protection.
FAQ
Can ZXMS6005DN8-13 drive inductive loads without external flyback diodes?
Yes. Its integrated active clamp circuit limits VDS to 60–70V during inductive turn-off, absorbing up to 120mJ of energy. This eliminates the need for external flyback diodes in most 12V/24V applications, though layout must follow Diodes' recommended SO-8 pad design for thermal and EMI performance.
What is the maximum continuous current per channel at 85°C ambient?
At TA = 85°C, continuous current drops to approximately 1.1A per channel (based on 1.21W PD and 103°C/W RθJA). With 2oz copper and 1-inch² thermal pad, derating improves to ~1.4A due to lower RθJA = 81°C/W, as confirmed in the datasheet's thermal characteristics table.
Does ZXMS6005DN8-13 support PWM dimming of LEDs?
Yes. With 6µs turn-on delay and 19µs fall time, it supports PWM frequencies up to ~50kHz for smooth LED dimming. Its thermal shutdown with auto-restart prevents latch-up during extended duty cycles, and logic-level input ensures compatibility with standard MCU PWM outputs.
Is there a pin-compatible automotive-grade version?
Yes. The ZXMS6005DN8Q is the AEC-Q100 qualified variant, sharing identical pinout, electrical specs, and SO-8 package. It differs only in test screening and documentation-no redesign is needed when upgrading from industrial to automotive applications.
ZXMS6005DN8-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Series:
- INTELLIFET®
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Type:
- General Purpose
- Number of Outputs:
- 2
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- Low Side
- Output Type:
- N-Channel
- Interface:
- On/Off
- Voltage - Load:
- 60V (Max)
- Voltage - Supply (Vcc/Vdd):
- 3.3V, 5V
- Current - Output (Max):
- 1.8A
- Rds On (Typ):
- 150mOhm
- Input Type:
- Non-Inverting
- Features:
- Auto Restart
- Fault Protection:
- Current Limiting (Fixed), Over Temperature, Over Voltage
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOIC
ZXMS6005DN8-13 FAQ
1.How can I place an order for ZXMS6005DN8-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for ZXMS6005DN8-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ZXMS6005DN8-13 reliable?
The price and inventory of ZXMS6005DN8-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ZXMS6005DN8-13 is usually 5 days.
3.What payment methods are accepted for ZXMS6005DN8-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ZXMS6005DN8-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ZXMS6005DN8-13?
ZXMS6005DN8-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ZXMS6005DN8-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ZXMS6005DN8-13?
For technical support, including ZXMS6005DN8-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ZXMS6005DN8-13 requirements.
6.How does Aetrix verify that ZXMS6005DN8-13 is sourced from the original manufacturer or authorized distributors?
All ZXMS6005DN8-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ZXMS6005DN8-13 meets industry standards.
7.What is the process for return or replacement of ZXMS6005DN8-13?
All ZXMS6005DN8-13 units undergo pre-shipment inspection (PSI). If there is an issue with ZXMS6005DN8-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ZXMS6005DN8-13 part is unused and in its original packaging.
Return procedure for ZXMS6005DN8-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ZXMS6005DN8-13 Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
