My Inquiry
My Account
Diodes Incorporated ZXMS6005DN8Q-13
- Part No.:
- ZXMS6005DN8Q-13
- Manufacturer:
- Diodes Incorporated
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
ZXMS6005DN8Q-13.pdf
- Description:
- IC PWR DRIVER N-CHAN 1:1 8SOIC
- Quantity:
- Payment:
- Shipping:
Inventory:4,894
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ZXMS6005DN8Q-13 from Diodes Incorporated is a dual-channel, 60V N-channel self-protected IntelliFET MOSFET in SO-8 package, featuring logic-level input (3.3V/5V compatible), 200mΩ RDS(ON), 1.8A nominal load current at 5V, and integrated active overvoltage clamping (16V short-circuit VDS). It serves as a rugged low-side power switch for automotive and industrial load control where discrete MOSFETs lack fault resilience.
For engineers reviewing the ZXMS6005DN8Q-13 datasheet, ZXMS6005DN8Q-13 pinout, ZXMS6005DN8Q-13 application, or ZXMS6005DN8Q-13 equivalent, key selection criteria include its dual-channel isolation, AEC-Q101 qualification, 120mJ unclamped inductive energy rating, thermal shutdown with auto-restart, and compatibility with microcontroller GPIOs driving lamps, motors, solenoids, and relays in harsh 12V/24V DC systems.
Technical Context
The ZXMS6005DN8Q-13 integrates two electrically isolated low-side switches sharing no internal connection between channels. Each channel implements independent protection: active clamp limiting VDS to 16V during short circuits, current-limiting at 3.3–7A (depending on VIN), and thermal trip at +150°C to +175°C with +10°C hysteresis.
Its logic-level input accepts 0–5.5V drive, with VIH ≥3V ensuring turn-on from 3.3V MCUs. The device operates in linear mode only during fault conditions-the current limit deactivates at low VDS to minimize conduction loss, allowing full-rated continuous current (1.8A @ 5V) under normal switching.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS | 60V maximum - supports 24V automotive and industrial bus rails with margin for transients. |
| RDS(ON) | 150–250 mΩ @ 5V/VIN - enables <1.2W conduction loss at 1.8A, reducing heatsink requirements. |
| ID(continuous) | 1.8A @ VIN=5V, TA=+25°C - sufficient for driving 12W lamps or small DC motors without external current sensing. |
| EAS | 120mJ - withstands inductive kickback from solenoids and relay coils without external snubbers. |
| VDS(SC) | 16V active clamp voltage - limits energy dissipation during short-circuit events, enabling safe auto-restart. |
| TJ(max) | +150°C operating junction temperature - ensures reliability in under-hood or enclosed industrial enclosures. |
| AEC-Q101 | Qualified - validated for automotive-grade temperature cycling, humidity, and mechanical stress per JESD22. |
Pinout & Package
Package: SO-8, surface-mount, lead-free, RoHS-compliant, moisture sensitivity level 1. Dimensions per JEDEC MS-012, 1.27mm pitch, 4.9mm × 6.0mm body.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN1) | Channel 1 input control | Logic-level gate driver input; accepts 0–5.5V; draws ≤200µA at 5V. |
| 2 (S1) | Channel 1 source | Low-side return path; tied to system ground; shares common source with D1/S2/D2 in package but electrically isolated per channel. |
| 3 (D1) | Channel 1 drain | Switched high-current output; connects to load cathode (lamp/motor/solenoid); clamped to 16V during shorts. |
| 4 (D2) | Channel 2 drain | Independent high-current output; fully isolated from D1; same clamping and current-limit behavior as D1. |
| 5 (S2) | Channel 2 source | Second low-side return; separate from S1; allows dual independent loads referenced to same or different grounds. |
| 6 (IN2) | Channel 2 input control | Independent logic input; identical timing and threshold to IN1; enables synchronous or asynchronous dual switching. |
| 7, 8 (GND) | Power ground / thermal pad | Internally connected source terminals and exposed copper pad; primary heat path to PCB; must be soldered to ≥1-inch² 2oz copper. |
Key Features
| Feature | Design Value |
|---|---|
| Dual independent channels | Zero electrical coupling between IN1/D1/S1 and IN2/D2/S2 - eliminates crosstalk in multi-load control. |
| Active overvoltage clamp | Clamps VDS to 16V during short circuits - avoids destructive avalanche, enables predictable energy dissipation. |
| Auto-restarting thermal shutdown | Trips at +150°C to +175°C with +10°C hysteresis - recovers automatically after cooling, eliminating manual reset. |
| Logic-level compatibility | VIH = 3V min, VIL = 0.7V max - directly driven by 3.3V or 5V microcontrollers without level-shifting. |
| ESD robustness | HBM 4kV, CDM 1kV - survives handling and board assembly without additional protection circuitry. |
Applications
| Lamp Driver | Motor Driver |
|---|---|
Use Scenario: Switching incandescent or LED headlamps in automotive body control modules. IC Role / Device Role / Timing Role: Low-side load switch with in-rush current management and open-load detection capability. Use Value: Withstands 10× cold-filament in-rush without latch-up; 120mJ EAS absorbs lamp filament arc energy. |
Use Scenario: Driving 12V brushed DC motors in HVAC actuators or seat adjusters. IC Role / Device Role / Timing Role: Fault-tolerant H-bridge half-bridge driver (dual channel used per motor direction). Use Value: Active clamp limits back-EMF spikes to 16V, preventing MOSFET failure during sudden stops or stalls. |
| Relay Driver | Solenoid Driver |
Use Scenario: Replacing electromechanical relays in industrial PLC output modules. IC Role / Device Role / Timing Role: Solid-state replacement with cycle-life >10⁹ operations and zero contact bounce. Use Value: Eliminates relay coil flyback diodes; integrated clamp handles 120mJ inductive energy without external components. |
Use Scenario: Controlling fuel injectors or pneumatic valves in engine control units. IC Role / Device Role / Timing Role: Precision current-limited switch with fast turn-off (<53µs total) for pulse-width modulated actuation. Use Value: Current limit of 3.3–7A (VIN-dependent) prevents solenoid overheating during extended duty cycles. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-channel protected low-side switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Infineon BTS7004-1EPP | Single-package quad-channel; 40V VDS, 120mΩ RDS(ON); no active clamp - relies on external TVS. | Higher channel density but lower voltage rating; requires external protection for 24V inductive loads. | Select when board space is constrained and 40V rail suffices; avoid for 60V transient-prone environments. |
| STMicroelectronics VNQ5E025AJTR-E | Quad-channel; 41V VDS, 25mΩ RDS(ON); integrated diagnostic feedback (current sense, fault flag). | Superior conduction efficiency and diagnostics, but lacks 60V rating and 120mJ EAS robustness. | Prefer for precision current monitoring in battery-powered systems; not suitable for high-energy inductive loads. |
Compared with BTS7004-1EPP and VNQ5E025AJTR-E, the ZXMS6005DN8Q-13 uniquely balances 60V operation, 120mJ inductive ruggedness, and dual-channel independence-making it optimal for unregulated 24V industrial loads where fault energy absorption is critical.
Availability
ZXMS6005DN8Q-13 is available at Aetrix Electronics and suitable for automotive body electronics, industrial PLC outputs, and 12V/24V DC motor control requiring stable component supply across long production lifecycles.
Supply support for ZXMS6005DN8Q-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-reliability power management, signal integrity, and protection solutions.
The ZXMS6005DN8Q-13 belongs to Diodes' IntelliFET™ family-engineered specifically for ruggedized low-side switching in automotive and industrial environments where fault tolerance, AEC-Q101 compliance, and simplified system design are mandatory.
FAQ
What is the maximum continuous current per channel at 85°C ambient?
At TA = +85°C, derated continuous current is 1.2A per channel (based on RθJA = 81°C/W and PD = 1.56W). This assumes 2oz copper with 1-inch² thermal pad. Actual current depends on PCB layout and airflow; thermal simulation is recommended for enclosure-constrained designs.
Can ZXMS6005DN8Q-13 drive inductive loads without external flyback diodes?
Yes. Its integrated active clamp limits VDS to 16V during inductive turn-off, absorbing up to 120mJ of energy. External diodes are unnecessary for typical lamp, relay, and solenoid loads. However, for loads exceeding 120mJ (e.g., large motors), external suppression remains advisable.
Is the SO-8 package thermally enhanced compared to standard SO-8?
Yes. Pins 7 and 8 are internally connected to the exposed drain-source thermal pad. When soldered to ≥1-inch² 2oz copper, RθJA improves from 103°C/W to 81°C/W-enabling 25% higher power dissipation than standard SO-8 variants without thermal pads.
Does the device support PWM operation at frequencies above 10kHz?
Yes. Total switching time (tD(ON) + tR + tD(OFF) + tF) is ≤73µs, supporting PWM up to ~10kHz with minimal dead-time overhead. For 20kHz+ operation, gate drive strength and layout parasitics become dominant; use 5V drive and minimize trace inductance for optimal performance.
ZXMS6005DN8Q-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Series:
- INTELLIFET®
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Type:
- General Purpose
- Number of Outputs:
- 2
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- Low Side
- Output Type:
- N-Channel
- Interface:
- On/Off
- Voltage - Load:
- 60V (Max)
- Voltage - Supply (Vcc/Vdd):
- 3.3V, 5V
- Current - Output (Max):
- 1.8A
- Rds On (Typ):
- 150mOhm
- Input Type:
- Non-Inverting
- Features:
- Auto Restart
- Fault Protection:
- Current Limiting (Fixed), Over Temperature, Over Voltage
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SOIC
ZXMS6005DN8Q-13 FAQ
1.How can I place an order for ZXMS6005DN8Q-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for ZXMS6005DN8Q-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ZXMS6005DN8Q-13 reliable?
The price and inventory of ZXMS6005DN8Q-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ZXMS6005DN8Q-13 is usually 5 days.
3.What payment methods are accepted for ZXMS6005DN8Q-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ZXMS6005DN8Q-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ZXMS6005DN8Q-13?
ZXMS6005DN8Q-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ZXMS6005DN8Q-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ZXMS6005DN8Q-13?
For technical support, including ZXMS6005DN8Q-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ZXMS6005DN8Q-13 requirements.
6.How does Aetrix verify that ZXMS6005DN8Q-13 is sourced from the original manufacturer or authorized distributors?
All ZXMS6005DN8Q-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ZXMS6005DN8Q-13 meets industry standards.
7.What is the process for return or replacement of ZXMS6005DN8Q-13?
All ZXMS6005DN8Q-13 units undergo pre-shipment inspection (PSI). If there is an issue with ZXMS6005DN8Q-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ZXMS6005DN8Q-13 part is unused and in its original packaging.
Return procedure for ZXMS6005DN8Q-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ZXMS6005DN8Q-13 Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
