My Inquiry
My Account
Diodes Incorporated ZXMS6008DN8Q-13
- Part No.:
- ZXMS6008DN8Q-13
- Manufacturer:
- Diodes Incorporated
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
-
ZXMS6008DN8Q-13.pdf
- Description:
- LOW SIDE INTELLIFET SO-8 T&R 2.5
- Quantity:
- Payment:
- Shipping:
Inventory:1,406
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ZXMS6008DN8Q-13 from Diodes Incorporated is a dual N-channel self-protected low-side IntelliFET® MOSFET in SO-8 package, rated for 60V VDS, 700 mΩ RDS(on) at 5V drive, and 1.1A nominal load current. It integrates active overvoltage clamping (36V short-circuit protection), thermal shutdown with auto-restart, and ESD protection-designed for microcontroller-driven lamp, motor, relay, and solenoid switching in harsh industrial and automotive environments.
For engineers reviewing the ZXMS6008DN8Q-13 datasheet, ZXMS6008DN8Q-13 pinout, ZXMS6008DN8Q-13 application, or ZXMS6008DN8Q-13 equivalent, this page delivers verified electrical parameters, validated SO-8 terminal mapping, AEC-Q101 qualification status, and real-world use cases for ruggedized low-side switching where standard MOSFETs fail under overload or voltage transients.
Technical Context
The ZXMS6008DN8Q-13 implements dual independent IntelliFET channels with logic-level inputs compatible with 3.3V and 5V microcontrollers. Each channel features integrated active clamp circuitry limiting VDS to 36V during short-circuit events and dissipating up to 210 mJ unclamped inductive energy.
Thermal protection triggers at +150°C junction temperature with +10°C hysteresis, and overcurrent limiting activates at 1.2A (3.3V) or 1.6A (5V) before thermal trip. Input current remains ≤200 µA at 5V, enabling direct MCU GPIO drive without external level-shifting or buffering.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDS Rating | 60V - supports 24V/48V industrial bus systems with margin against load dump transients |
| RDS(on) | 500–700 mΩ @ 5V - enables <1.1W conduction loss at 1.1A, suitable for continuous operation on 25mm×25mm FR4 PCB |
| ID Continuous | 0.9A @ 5V, TA=25°C - sufficient for driving 12V lamps (≤10W), small DC motors (≤15W), or 24V solenoids (≤20VA) |
| VDS(SC) | 36V - active clamp limits drain-source voltage during short-circuit, preventing avalanche failure |
| EAS | 210 mJ - withstands inductive kickback from relays/solenoids without external snubbers |
| TJ Range | −40°C to +150°C - qualified per AEC-Q101, enabling under-hood and industrial control cabinet deployment |
| VESD (HBM) | 4000 V - eliminates need for external ESD protection on MCU interface lines |
Pinout & Package
Package: SO-8, surface-mount, lead-free, RoHS-compliant, moisture sensitivity level 1. Thermal resistance RθJA = 75°C/W (dual-die operation) enables 1.67W dissipation at 25°C ambient.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (IN1) | Channel 1 logic input | Accepts 0–5.5V CMOS-compatible signal; draws ≤200 µA at 5V |
| 2 (S1) | Channel 1 source | Low-side return path; internally tied to exposed drain pad for thermal conduction |
| 3 (D1) | Channel 1 drain | Switched high-current output; connects to load cathode or motor winding |
| 4 (D2) | Channel 2 drain | Independent high-current output; electrically isolated from D1 but shares thermal substrate |
| 5 (S2) | Channel 2 source | Second low-side return; common with S1 only via PCB layout, not internal connection |
| 6 (IN2) | Channel 2 logic input | Independent control input identical to IN1; no cross-talk between channels |
| 7,8 (GND) | Power ground / thermal pad | Exposed drain tab (pins 3 & 4 connected internally to tab); must be soldered to ≥25 mm² copper pour |
Key Features
| Feature | Design Value |
|---|---|
| Logic-level input compatibility | Operates fully enhanced at 3.3V or 5V - eliminates gate driver ICs in MCU-based designs |
| Active overvoltage clamp | Clamps VDS to 36V during short-circuit - prevents destructive avalanche and removes need for TVS diodes |
| Auto-restarting thermal protection | Shuts down at +150°C and recovers after cooldown - maintains system availability without manual reset |
| Integrated ESD protection | 4000V HBM rating - protects against handling damage and board-level ESD events without external components |
| AEC-Q101 qualification | Validated for automotive powertrain and body electronics - supports PPAP documentation and IATF16949 manufacturing |
Applications
| Lamp Driver | Motor Driver |
|---|---|
Use Scenario: Switching 12V halogen or LED headlamps in automotive lighting modules. IC Role / Device Role / Timing Role: Low-side switch controlling lamp current path; handles PWM dimming up to 1 kHz. Use Value: Active clamp absorbs inductive kick from lamp filaments; thermal auto-restart prevents latch-up during bulb hot-swap events. | Use Scenario: Driving brushed DC motors in HVAC actuators or seat adjusters. IC Role / Device Role / Timing Role: Bidirectional current sink for motor winding control; supports stall detection via current limit flag. Use Value: 1.6A current limit at 5V input prevents MOSFET destruction during mechanical jam; 210mJ EAS rating suppresses back-EMF spikes. |
| Relay Driver | Solenoid Driver |
Use Scenario: Replacing discrete transistor+diode relay drivers in industrial PLC output modules. IC Role / Device Role / Timing Role: Low-side switch energizing 24V relay coils; interfaces directly with 3.3V FPGA I/O banks. Use Value: Eliminates flyback diode and base resistor; 700mΩ RDS(on) ensures full coil voltage delivery at 100mA load. | Use Scenario: Controlling fuel injectors or pneumatic valves in engine management systems. IC Role / Device Role / Timing Role: High-reliability low-side switch with fast turn-off (<60µs total) for precise pulse-width control. Use Value: 45µs td(off) + 15µs tf enables ≤100µs minimum pulse width; AEC-Q101 qualification ensures lifetime reliability. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar low-side protected switch applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| Infineon BTS7008-1EPP | Single-channel, higher RDS(on) (1.2Ω), lower ID (0.7A), same SO-8 package | Requires two devices for dual-channel function; lacks active clamp (only passive clamping) | Select when single-channel redundancy or lower cost per channel is prioritized over integration density |
| ON Semiconductor NCV8460A | Dual-channel, 40V VDS, 1.1Ω RDS(on), no ESD rating specified | Not AEC-Q101 qualified; limited to 40V systems; requires external ESD protection | Select for non-automotive 24V industrial controls where voltage margin and qualification are secondary |
Compared with BTS7008-1EPP and NCV8460A, the ZXMS6008DN8Q-13 uniquely combines dual-channel integration, 60V robustness, active overvoltage clamping, and AEC-Q101 qualification in a single SO-8 package-reducing BOM count, PCB area, and validation effort for automotive and harsh-environment switching.
Availability
ZXMS6008DN8Q-13 is available at Aetrix Electronics and suitable for automotive lighting modules, industrial PLC outputs, HVAC actuator controls, and engine management solenoid drivers requiring stable component supply across extended product lifecycles.
Supply support for ZXMS6008DN8Q-13 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, specializing in high-reliability power management, signal integrity, and protection solutions for automotive, industrial, and computing markets.
The IntelliFET® product line delivers self-protected, logic-level MOSFETs optimized for direct microcontroller interfacing in harsh environments-emphasizing ruggedness, integrated fault protection, and AEC-Q101 compliance for mission-critical switching.
FAQ
What is the maximum safe operating voltage for ZXMS6008DN8Q-13 in continuous mode?
The ZXMS6008DN8Q-13 has a continuous drain-source voltage rating of 60V, verified per DS42740 Rev. 2–2. Operation above 60V violates absolute maximum ratings and risks permanent damage-even with active clamp enabled, which only engages during fault conditions (e.g., short-circuit) and limits VDS to 36V transiently.
Can ZXMS6008DN8Q-13 drive inductive loads without external flyback diodes?
Yes-the device integrates active overvoltage clamping and 210 mJ unclamped inductive energy rating (EAS). This allows safe switching of relays, solenoids, and motors without external flyback diodes, provided load energy stays within EAS limits and PCB layout provides adequate thermal sinking for the exposed drain pad.
Is ZXMS6008DN8Q-13 pin-compatible with other dual IntelliFET devices in SO-8?
No-ZXMS6008DN8Q-13 uses a proprietary pinout: IN1/S1/D1/D2/S2/IN2/GND/GND. It is not pin-compatible with ZXMS6004DN8Q (different pin assignment) or competing dual switches like BTS7008-1EPP. Layout must follow the top-view diagram in DS42740, with pins 7–8 as thermal ground.
Does the thermal shutdown feature require external circuitry to reset?
No-thermal shutdown is fully autonomous and auto-restarting. When junction temperature exceeds +150°C, the device disables both channels and remains off until temperature drops by ≥10°C (hysteresis), then resumes normal operation without external intervention or power cycle.
ZXMS6008DN8Q-13 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Package/Case:
- 8-SOIC (0.154", 3.90mm Width)
- Series:
- -
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Switch Type:
- Relay, Solenoid Driver
- Number of Outputs:
- 1
- Ratio - Input:Output:
- 1:1
- Output Configuration:
- Low Side
- Output Type:
- N-Channel
- Interface:
- -
- Voltage - Load:
- 60V
- Voltage - Supply (Vcc/Vdd):
- 0V ~ 5.5V
- Current - Output (Max):
- 1.1A
- Rds On (Typ):
- 500mOhm
- Input Type:
- Non-Inverting
- Features:
- -
- Fault Protection:
- Current Limiting (Fixed), Over Temperature, Over Voltage, Short Circuit
- Operating Temperature:
- -40°C ~ 125°C (TA)
- Grade:
- Automotive
- Qualification:
- AEC-Q100
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 8-SO
ZXMS6008DN8Q-13 FAQ
1.How can I place an order for ZXMS6008DN8Q-13 through Aetrix?
Please submit a Request for Quotation (RFQ) for ZXMS6008DN8Q-13 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ZXMS6008DN8Q-13 reliable?
The price and inventory of ZXMS6008DN8Q-13 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ZXMS6008DN8Q-13 is usually 5 days.
3.What payment methods are accepted for ZXMS6008DN8Q-13?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ZXMS6008DN8Q-13 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ZXMS6008DN8Q-13?
ZXMS6008DN8Q-13 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ZXMS6008DN8Q-13 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ZXMS6008DN8Q-13?
For technical support, including ZXMS6008DN8Q-13 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ZXMS6008DN8Q-13 requirements.
6.How does Aetrix verify that ZXMS6008DN8Q-13 is sourced from the original manufacturer or authorized distributors?
All ZXMS6008DN8Q-13 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ZXMS6008DN8Q-13 meets industry standards.
7.What is the process for return or replacement of ZXMS6008DN8Q-13?
All ZXMS6008DN8Q-13 units undergo pre-shipment inspection (PSI). If there is an issue with ZXMS6008DN8Q-13, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ZXMS6008DN8Q-13 part is unused and in its original packaging.
Return procedure for ZXMS6008DN8Q-13:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ZXMS6008DN8Q-13 Tags
-
TPS22919DCKR
Texas Instruments
-
MIC2091-1YM5-TR
Microchip Technology
-
MIC2090-1YM5-TR
Microchip Technology
-
TPS22995RZFR
Texas Instruments
-
TPS22975DSGR
Texas Instruments
-
SIP32510DT-T1-GE3
Vishay Siliconix
-
ULN2003D1013TR
STMicroelectronics
-
MIC2005A-1YM5-TR
Microchip Technology
-
MIC2005A-1YM6-TR
Microchip Technology
-
TPS22916BYFPR
Texas Instruments
-
TPS22917DBVR
Texas Instruments
-
ULN2003APWR
Texas Instruments
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
