My Inquiry
My Account
Diodes Incorporated ZXTN620MATA
- Part No.:
- ZXTN620MATA
- Manufacturer:
- Diodes Incorporated
- Category:
- Single Bipolar Transistors
- Package:
- 3-UDFN
- Datasheet:
-
ZXTN620MATA.pdf
- Description:
- TRANS NPN 80V 3.5A DFN2020B-3
- Quantity:
- Payment:
- Shipping:
Inventory:24,579
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
ZXTN620MATA from Diodes Incorporated is an 80V NPN low-saturation transistor in DFN2020B-3 package, rated for 3.5A continuous collector current, with VCE(sat) ≤ 185 mV at 1A/20mA drive and RSAT = 68 mΩ. It serves as a high-efficiency power switch in DC–DC converters and motor control circuits where thermal efficiency and thin-profile mounting are critical.
For engineers reviewing the ZXTN620MATA datasheet, ZXTN620MATA pinout, ZXTN620MATA application, or ZXTN620MATA equivalent, key selection criteria include its AEC-Q101 qualification, 0.6mm profile, 51°C/W RθJA (on 10 cm² 1oz Cu), and hFE ≥ 200 up to 3A - all verified under pulsed test conditions per DS31894 Rev. 5-2.
Technical Context
This NPN transistor operates with BVCEO = 80 V and VEBO = 7 V, supporting robust voltage margin in switching applications. Its fT = 100–160 MHz enables fast switching, while ton/toff = 86 ns / 1128 ns reflect optimized charge storage for medium-speed power control.
The device uses a pre-plated NiPdAu leadframe and green molding compound, qualified to AEC-Q101 for automotive-grade reliability. Thermal performance is defined with full collector-pad soldering to PCB copper - RθJL = 16.8°C/W confirms efficient heat extraction through the exposed drain pad.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | 80 V - supports 48V bus systems with 67% voltage headroom before breakdown |
| IC (continuous) | 3.5 A - delivers >3W dissipation capability on standard FR4 with 10 cm² copper |
| VCE(sat) @ 1A | ≤ 185 mV - reduces conduction loss to <185 mW at 1A, enabling >95% efficiency in low-VOUT buck stages |
| RSAT | 68 mΩ - equivalent on-resistance simplifies loss modeling vs. MOSFETs in bipolar gate-drive roles |
| hFE @ 3A | ≥ 200 - ensures stable base drive requirement of ≤15 mA for full 3.5A switching |
| fT | 100–160 MHz - supports clean turn-on/turn-off in PWM frequencies up to 500 kHz |
| RθJA | 51°C/W - 60% lower than SOT-23, enabling higher power density without forced air |
Pinout & Package
Package: DFN2020B-3, 2.0 mm × 2.0 mm × 0.6 mm, thermally enhanced with exposed collector pad (pin 1). Molded plastic case, NiPdAu-plated terminals, UL 94V-0 rated.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 (Collector) | Main current sink terminal | Exposed copper pad - must be soldered to ≥10 cm² 1oz Cu for rated RθJA = 51°C/W |
| 2 (Base) | Current-controlled input | Drives transistor into saturation; requires 300 mA peak for 3.5A IC per datasheet test condition |
| 3 (Emitter) | Current return path | Connected to ground or low-side reference; forms common-emitter switching topology |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive power modules requiring -55°C to +150°C operation and humidity resistance |
| Low-profile 0.6 mm height | Enables integration into space-constrained portable power supplies and battery management PCBs |
| RθJA = 51°C/W | Reduces thermal derating by 60% vs. SOT-23, allowing 2.45 W continuous dissipation on minimal copper |
| hFE specified up to 5 A | Supports accurate gain-based base drive design across full load range without extrapolation |
| Lead-free, halogen-free "Green" construction | Complies with RoHS and JEDEC J-STD-020 Level 1 moisture sensitivity for standard reflow |
Applications
| MOSFET Gate Driving | DC–DC Converters |
|---|---|
Use Scenario: Driving high-side N-channel MOSFET gates in synchronous buck regulators. IC Role / Device Role / Timing Role: NPN switch providing low-impedance pull-down path during dead-time to prevent shoot-through. Use Value: VCE(sat) ≤ 185 mV at 1A ensures gate discharge energy loss stays below 0.2 mJ per cycle, minimizing driver heating. | Use Scenario: Low-voltage, high-current output stage in 12V-to-3.3V point-of-load converters. IC Role / Device Role / Timing Role: Saturated-switch regulator element operating in linear or quasi-resonant mode. Use Value: RSAT = 68 mΩ enables <100 mW conduction loss at 1.2A, improving light-load efficiency over MOSFET alternatives. |
| Charging Circuits | Motor Control |
Use Scenario: Constant-current switch in USB-C PD or Li-ion battery charging paths. IC Role / Device Role / Timing Role: Precision current-regulating pass element controlled via feedback loop. Use Value: hFE stability from 10 mA to 3.5A allows single-loop analog current sensing without gain compensation. | Use Scenario: H-bridge low-side switch in 24V brushed DC motor drivers for industrial actuators. IC Role / Device Role / Timing Role: High-current saturated switch handling bidirectional stall currents up to 3.5A. Use Value: 80V VCEO rating provides 3× margin over 24V rail transients, reducing need for snubbers. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar NPN low-saturation transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ZXTN2010ZTA | VCEO = 100 V, IC = 2.5 A, VCE(sat) = 220 mV @ 1A | Higher voltage margin but lower current and higher saturation loss | Select when 100V breakdown is mandatory and 2.5A suffices |
| DMT3006LPSQ-13 | 60V VDS, 6A ID, MOSFET with 22mΩ RDS(on) | Lower on-resistance but requires gate drive circuitry and lacks inherent current gain | Select when gate drive resources exist and <100mΩ on-state resistance is prioritized over simplicity |
Compared with ZXTN2010ZTA, ZXTN620MATA delivers 40% higher current and 19% lower VCE(sat); versus DMT3006LPSQ-13, it eliminates gate driver complexity but trades off 3× on-resistance - making it optimal for cost-sensitive, moderate-frequency, low-component-count power switches.
Availability
ZXTN620MATA is available at Aetrix Electronics and suitable for DC–DC converters, motor control modules, and battery charging circuits requiring stable component supply and AEC-Q101-compliant reliability.
Supply support for ZXTN620MATA includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Diodes Incorporated is a global manufacturer of discrete semiconductors and analog ICs, headquartered in Plano, Texas, with design and manufacturing operations across Asia and the Americas.
ZXTN620MATA belongs to Diodes' ZXT series of high-reliability, low-saturation bipolar transistors designed specifically for automotive and industrial power switching applications demanding thin-profile packaging and AEC-Q101 validation.
FAQ
What is the maximum continuous collector current for ZXTN620MATA under standard PCB conditions?
The ZXTN620MATA supports 3.5 A continuous collector current when mounted on a 31 mm × 31 mm FR4 board with full 1 oz copper coverage on the collector pad, per Note 3 in DS31894 Rev. 5-2. Derating begins above 25°C ambient at 19.6 mW/°C for this configuration.
Is ZXTN620MATA suitable for automotive applications?
Yes - ZXTN620MATA is qualified to AEC-Q101 standards, with guaranteed operation from −55°C to +150°C junction temperature, moisture sensitivity level 1, and green RoHS-compliant construction. It is approved for use in engine control, body electronics, and ADAS power stages.
How does the DFN2020B-3 package improve thermal performance over SOT-23?
The DFN2020B-3 package achieves RθJA = 51°C/W - 60% lower than typical SOT-23 - due to its exposed collector pad directly soldered to PCB copper, larger thermal interface area (4 mm² footprint), and optimized internal thermal path to the leadframe, not just package geometry.
Can ZXTN620MATA replace a MOSFET in gate-driving applications?
Yes - its low VCE(sat) (≤185 mV) and high hFE (>200 at 3A) allow direct replacement of small-signal MOSFETs in low-side gate discharge paths, eliminating gate driver ICs and reducing component count, especially where fast turn-off is less critical than simplicity and cost.
ZXTN620MATA Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Diodes Incorporated
- Series:
- -
- Package/Case:
- 3-UDFN
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Transistor Type:
- NPN
- Current - Collector (Ic) (Max):
- 3.5 A
- Voltage - Collector Emitter Breakdown (Max):
- 80 V
- Vce Saturation (Max) @ Ib, Ic:
- 325mV @ 300mA, 3.5A
- Current - Collector Cutoff (Max):
- 25nA
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 300 @ 200mA, 2V
- Power - Max:
- 3 W
- Frequency - Transition:
- 160MHz
- Operating Temperature:
- -55°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- DFN2020B-3
ZXTN620MATA FAQ
1.How can I place an order for ZXTN620MATA through Aetrix?
Please submit a Request for Quotation (RFQ) for ZXTN620MATA on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for ZXTN620MATA reliable?
The price and inventory of ZXTN620MATA are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for ZXTN620MATA is usually 5 days.
3.What payment methods are accepted for ZXTN620MATA?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for ZXTN620MATA transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for ZXTN620MATA?
ZXTN620MATA orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your ZXTN620MATA order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for ZXTN620MATA?
For technical support, including ZXTN620MATA datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your ZXTN620MATA requirements.
6.How does Aetrix verify that ZXTN620MATA is sourced from the original manufacturer or authorized distributors?
All ZXTN620MATA products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that ZXTN620MATA meets industry standards.
7.What is the process for return or replacement of ZXTN620MATA?
All ZXTN620MATA units undergo pre-shipment inspection (PSI). If there is an issue with ZXTN620MATA, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The ZXTN620MATA part is unused and in its original packaging.
Return procedure for ZXTN620MATA:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
ZXTN620MATA Tags
-
MMBT3906LT1G
onsemi
-
MMBT3904-7-F
Diodes Incorporated
-
MMBT3904LT1G
onsemi
-
MMBT3906-7-F
Diodes Incorporated
-
MMBT3904-TP
Micro Commercial Co
-
MMBT2222A-7-F
Diodes Incorporated
-
BC846BLT1G
onsemi
-
BC847B,215
Nexperia USA Inc.
-
SMMBT3904LT1G
onsemi
-
MMBT2222A-TP
Micro Commercial Co
-
MMBTA06LT1G
onsemi
-
MMBT2222ALT1G
onsemi
Tech Hub
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
