My Inquiry
My Account
Vishay General Semiconductor - Diodes Division 1N6267A-E3/73
- Part No.:
- 1N6267A-E3/73
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Category:
- TVS Diodes
- Package:
- DO-201AA, DO-27, Axial
- Datasheet:
-
1N6267A-E3/73.pdf
- Description:
- TVS DIODE 5.8VWM 10.5VC 1.5KE
- Quantity:
- Payment:
- Shipping:
Inventory:9,124
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
1N6267A-E3/73 from Vishay General Semiconductor is a unidirectional Transient Voltage Suppressor (TVS) diode designed for primary overvoltage protection in DC power rails and signal lines. It features a 6.45 V to 7.14 V breakdown voltage (VBR) at 10 mA, 5.80 V maximum stand-off voltage (VWM), 1000 µA maximum reverse leakage at VWM, 143 A peak pulse current (IPPM), and clamps transients to ≤10.5 V at IPPM. It is used in automotive sensor interfaces and industrial power supply inputs.
For engineers reviewing the 1N6267A-E3/73 datasheet, 1N6267A-E3/73 pinout, 1N6267A-E3/73 application, or 1N6267A-E3/73 equivalent, this page delivers verified electrical parameters, JEDEC 1.5KE package details, clamping performance under 10/1000 µs surge, thermal derating behavior, and direct alternatives with documented differences in breakdown tolerance and leakage.
Technical Context
This unidirectional TVS diode uses a glass-passivated silicon junction optimized for fast transient response (<1 ns) and low incremental clamping resistance. Its 1500 W peak pulse power rating applies to 10/1000 µs waveform pulses at 0.01% duty cycle, with thermal resistance of 15.4 °C/W (junction-to-lead) enabling effective heat dissipation into PCB copper.
The device operates across –55 °C to +175 °C junction temperature range and exhibits a positive temperature coefficient of VBR (+0.057 %/°C), ensuring stable clamping during thermal transients. It complies with JESD 22-B106 (solder dip at 275 °C for 10 s) and meets UL 94 V-0 flammability requirements for its molded epoxy case.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VBR (min/max) | 6.45 V / 7.14 V at 10 mA - defines precise voltage threshold where clamping initiates |
| VWM | 5.80 V - maximum continuous reverse operating voltage before significant leakage |
| IDRM | 1000 µA at VWM - ensures minimal standby power loss in always-on circuits |
| IPPM | 143 A (10/1000 µs) - quantifies surge handling capacity for lightning or inductive switch-off events |
| VC | ≤10.5 V at IPPM - guarantees protected ICs see no more than 10.5 V during worst-case surge |
| PPPM | 1500 W - enables robust protection without external heatsinking for short-duration transients |
| TJ max | +175 °C - supports operation in under-hood automotive or high-ambient industrial environments |
Pinout & Package
Package: JEDEC DO-201AD (Case Style 1.5KE), axial-leaded, molded epoxy body with matte tin-plated leads. Dimensions: 5.3 mm diameter × 9.5 mm length; lead spacing 7.2 mm; weight 0.968 g.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Anode | Forward conduction terminal | Connected to ground or lower-potential rail in unidirectional clamp configuration |
| Cathode | Reverse-biased clamping terminal | Marked with color band; connected to protected line - conducts only during overvoltage |
Key Features
| Feature | Design Value |
|---|---|
| Glass passivated junction | Enables stable long-term reliability and consistent VBR drift < ±5% over 1000 hrs at rated stress |
| 1500 W peak pulse power | Supports IEC 61000-4-5 Level 4 (4 kV) surge immunity without cascaded protection stages |
| Clamping ratio (VC/VBR) | 1.47 (10.5 V / 7.14 V max) - among lowest in 1.5 kW TVS family, minimizing stress on downstream ICs |
| AEC-Q101 qualification option | Available as 1N6267AHE3_B variant - validated for automotive powertrain and body electronics |
| UL 94 V-0 molding compound | Prevents flame propagation in enclosed enclosures per safety-critical industrial and telecom standards |
Applications
| Automotive Sensor Interface | Industrial Power Input |
|---|---|
Use Scenario: Protecting CAN/LIN bus transceivers and analog sensor front-ends from load dump and ISO 7637-2 pulses. IC Role / Device Role / Timing Role: Unidirectional shunt clamp placed between signal line and chassis ground. Use Value: Limits transient excursions to ≤10.5 V, preserving signal integrity and preventing latch-up in 5 V tolerant receivers. |
Use Scenario: Safeguarding 5 V/12 V DC-DC converter inputs against inductive kickback from relay coils and motor drivers. IC Role / Device Role / Timing Role: Primary overvoltage suppressor mounted directly at connector entry point. Use Value: Absorbs 1500 W surges within 1 ns, eliminating need for secondary MOV or gas discharge tube staging. |
| Consumer USB Port Protection | Telecom Line Card Surge Guard |
Use Scenario: Shielding USB 2.0 data lines (D+/D−) and VBUS from ESD and cable-induced transients. IC Role / Device Role / Timing Role: Low-capacitance unidirectional TVS tied to VBUS and grounded D+ or D−. Use Value: 1000 µA leakage at 5.8 V ensures no impact on USB suspend current budget. |
Use Scenario: Front-end protection for Ethernet PHYs and DSL line drivers exposed to lightning-induced surges on twisted-pair lines. IC Role / Device Role / Timing Role: First-stage clamping element in hybrid protector modules with GDT coordination. Use Value: 143 A IPPM handles 10/1000 µs surges up to 1.43 kA when paralleled per IEC 61643-21 guidelines. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar transient suppression applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SMBJ6.8A-E3/52 | DO-214AA package; 6.45–7.14 V VBR; 100 A IPPM; 600 W PPPM; 10.5 V VC | Lower surge rating suits space-constrained consumer designs; not rated for 1500 W pulses | Select when board area is limited and surge threat level is ≤IEC 61000-4-5 Level 3 (2 kV) |
| 1.5KE6.8A-E3/54 | Same electrical specs and DO-201AD package; identical VBR, VWM, IPPM, VC, and thermal characteristics | No functional difference - alternate manufacturer-marked part number for same die and assembly | Direct form-fit-function replacement; identical sourcing and qualification status as 1N6267A-E3/73 |
Compared with 1N6267A-E3/73, SMBJ6.8A-E3/52 offers smaller footprint but sacrifices 33% peak power handling, while 1.5KE6.8A-E3/54 provides identical protection performance with full interchangeability in production and qualification records.
Availability
1N6267A-E3/73 is available at Aetrix Electronics and suitable for automotive sensor interfaces, industrial power input stages, and telecom line card surge protection requiring stable component supply, RoHS-compliant manufacturing, and traceable lot-level documentation.
Supply support for 1N6267A-E3/73 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Vishay General Semiconductor is a global leader in discrete semiconductors, specializing in high-reliability diodes, MOSFETs, optoelectronics, and passive components for industrial, automotive, and computing markets.
The 1N6267A-E3/73 belongs to Vishay's TRANSZORB® TVS family, engineered specifically for high-energy transient suppression in harsh environments where sub-10 ns response and 1500 W surge capability are mandatory.
FAQ
What is the breakdown voltage tolerance for 1N6267A-E3/73?
The 1N6267A-E3/73 has a specified breakdown voltage range of 6.45 V to 7.14 V at 10 mA test current, corresponding to a ±5% tolerance around the nominal 6.8 V rating. This tight tolerance ensures predictable clamping onset across production lots and temperature extremes.
Is 1N6267A-E3/73 suitable for automotive applications?
Yes - the 1N6267A-E3/73 is RoHS-compliant and available in AEC-Q101 qualified version (1N6267AHE3_B). Its –55 °C to +175 °C operating range, 1500 W surge rating, and glass-passivated junction meet requirements for engine control units, body electronics, and ADAS sensor modules.
How does the clamping voltage of 1N6267A-E3/73 compare to its breakdown voltage?
At its rated 143 A peak pulse current (10/1000 µs), the 1N6267A-E3/73 clamps to ≤10.5 V. With a maximum VBR of 7.14 V, this yields a clamping ratio of 1.47 - confirming low dynamic impedance and efficient energy diversion without overstressing downstream 5 V logic.
What is the maximum reverse leakage current for 1N6267A-E3/73 at rated VWM?
The 1N6267A-E3/73 specifies a maximum reverse leakage current of 1000 µA at its 5.80 V stand-off voltage (VWM). This value is measured at 25 °C and remains below 5000 µA up to +125 °C, ensuring minimal standby power impact in always-on systems.
Can 1N6267A-E3/73 be used in bidirectional configurations?
No - the 1N6267A-E3/73 is strictly unidirectional. Bidirectional variants use the "CA" suffix (e.g., 1N6267CA). Using 1N6267A-E3/73 in reverse-biased AC applications would result in forward conduction and failure; correct polarity orientation is essential during PCB layout.
1N6267A-E3/73 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Vishay General Semiconductor - Diodes Division
- Package/Case:
- DO-201AA, DO-27, Axial
- Series:
- TransZorb®
- Packaging:
- Cut Tape (CT)
- Product Status:
- Active
- Type:
- Zener
- Unidirectional Channels:
- 1
- Bidirectional Channels:
- -
- Voltage - Reverse Standoff (Typ):
- 5.8V
- Voltage - Breakdown (Min):
- 6.45V
- Voltage - Clamping (Max) @ Ipp:
- 10.5V
- Current - Peak Pulse (10/1000µs):
- 143A
- Power - Peak Pulse:
- 1500W (1.5kW)
- Power Line Protection:
- No
- Applications:
- General Purpose
- Capacitance @ Frequency:
- -
- Operating Temperature:
- -55°C ~ 175°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Through Hole
- Supplier Device Package:
- 1.5KE
1N6267A-E3/73 FAQ
1.How can I place an order for 1N6267A-E3/73 through Aetrix?
Please submit a Request for Quotation (RFQ) for 1N6267A-E3/73 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for 1N6267A-E3/73 reliable?
The price and inventory of 1N6267A-E3/73 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 1N6267A-E3/73 is usually 5 days.
3.What payment methods are accepted for 1N6267A-E3/73?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 1N6267A-E3/73 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for 1N6267A-E3/73?
1N6267A-E3/73 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your 1N6267A-E3/73 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for 1N6267A-E3/73?
For technical support, including 1N6267A-E3/73 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 1N6267A-E3/73 requirements.
6.How does Aetrix verify that 1N6267A-E3/73 is sourced from the original manufacturer or authorized distributors?
All 1N6267A-E3/73 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 1N6267A-E3/73 meets industry standards.
7.What is the process for return or replacement of 1N6267A-E3/73?
All 1N6267A-E3/73 units undergo pre-shipment inspection (PSI). If there is an issue with 1N6267A-E3/73, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The 1N6267A-E3/73 part is unused and in its original packaging.
Return procedure for 1N6267A-E3/73:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
1N6267A-E3/73 Tags
-
ESD9B5.0ST5G
onsemi
-
DESD3V3E1BL-7B
Diodes Incorporated
-
ESD5Z3.3T1G
onsemi
-
D5V0H1B2LP-7B
Diodes Incorporated
-
D5V0P1B2LP-7B
Diodes Incorporated
-
DESD5V0U1BA-7
Diodes Incorporated
-
ESD5Z5.0T1G
onsemi
-
DESD5V0U1BB-7
Diodes Incorporated
-
D12V0L1B2LP-7B
Diodes Incorporated
-
PESD2V0Y1BSFYL
Nexperia USA Inc.
-
DF2S5M4CT,L3F
Toshiba Semiconductor and Storage
-
D5V0L1B2WS-7
Diodes Incorporated
Tech Hub
Comparator circuit design covering voltage thresholds, input limits, open-collector outputs, LM393 wiring, op-amp differences, hysteresis, timing, window detection and practical fault diagnosis.
Schmitt triggers use separate rising and falling thresholds to stabilize slow or noisy signals. This guide covers hysteresis, 74HC14 and 74HCT14 selection, comparator calculations, RC oscillators and p…
Counterfeit components can hide behind convincing markings and passing basic function tests. This engineering reference covers source traceability, external inspection, X-ray, XRF, electrical testing, …
A practical engineering and sourcing framework covering lifecycle verification, lifetime-buy calculations, replacement qualification, supplier checks and counterfeit-risk controls.
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
