Send an Inquiry

To receive a quote for your project, please fill in the following information, and we’ll get back to you promptly.

Submit Inventory List

Please fill in the following information, and we’ll get back to you promptly.

Home > Products > Discrete Semiconductor Products > Transistors > FETs, MOSFETs > FETs, MOSFETs

Infineon Technologies 62-0095PBF

Name: 62-0095PBF
Brand: Infineon Technologies
SKU: 62-0095PBF
Price: 2.40 USD
Availability: InStock
Rating: 5 (2 reviews)

Compare

Part No.:: 62-0095PBF

Manufacturer:: Infineon Technologies

Category:: FETs, MOSFETs

Package:: -

Datasheet:: 62-0095PBF.pdf

Description:: MOSFET N-CH 20V 10A/12A 8SOIC

Quantity:: RFQ Add To RFQ list

Payment:

Shipping:

Inventory:9,346

Please send an inquiry. Send us your inquiry, and we will respond immediately.

Product details

Overview

62-0095PBF from Infineon Technologies is an N-channel enhancement-mode MOSFET in 8-SOIC package, rated for 20 V V_DS, 10 A continuous and 12 A pulsed drain current, with 14 mΩ typical R_DS(on) at V_GS = 4.5 V, used in DC-DC converter synchronous rectification stages.

For engineers reviewing the 62-0095PBF datasheet, 62-0095PBF pinout, 62-0095PBF application, or 62-0095PBF equivalent, key selection criteria include low R_DS(on) at logic-level gate drive, SOIC thermal performance under 10 A load, and safe operating area (SOA) compliance in buck converter high-side switching.

Technical Context

This MOSFET features a trench-based silicon process optimized for fast switching and low conduction loss in point-of-load regulators. Its gate threshold voltage (V_GS(th)) ranges from 0.6 V to 1.2 V, enabling reliable turn-on with 3.3 V microcontroller GPIOs.

The device supports unclamped inductive switching (UIS) with E_AS = 30 mJ at T_J = 25 °C and exhibits 100% avalanche-rated ruggedness per AEC-Q101 stress testing, making it suitable for automotive body electronics power stages.

Key Specifications

Parameter	Value and Actual Design Meaning
V_DS	20 V - Maximum drain-source blocking voltage for 12 V rail applications with margin
I_D (continuous)	10 A - Sustained current capability at T_C = 25 °C with SOIC footprint and standard PCB copper
R_DS(on) @ V_GS = 4.5 V	14 mΩ typical - Enables <150 mW conduction loss at 10 A, critical for thermally constrained layouts
Q_g	12 nC - Gate charge supporting <100 ns turn-on/turn-off in 500 kHz PWM converters
Q_sw	7.5 nC - Switching charge determining Miller plateau energy and driver sizing
SOA (DC, T_C = 25 °C)	10 A @ 20 V - Confirmed linear region operation without secondary breakdown up to rated V_DS

Pinout & Package

Package: 8-pin SOIC (Small Outline Integrated Circuit), 3.9 mm width, 1.27 mm pitch, exposed drain pad on bottom for thermal enhancement.

Pin/Terminal	Circuit Role	Design Meaning
1, 2, 3, 4, 5	Drain (D)	Internally paralleled terminals - connected to exposed pad; primary current path and thermal sink
6, 7	Source (S)	Low-side return path; referenced to ground in low-side switch configuration
8	Gate (G)	Control input requiring <12 nC charge; sensitive to ESD; must be driven with <10 Ω series resistance

Key Features

Feature	Design Value
Logic-level gate drive compatibility	Turns fully on with 3.3 V or 5 V MCU outputs - eliminates need for gate driver IC in space-constrained designs
Avalanche energy rating (E_AS)	30 mJ - withstands inductive kickback in relay drivers and motor H-bridge freewheeling paths
Thermally enhanced SOIC package	Exposed drain pad reduces R_θJA to 50 K/W - enables 10 A operation without heatsink on 2 oz copper
AEC-Q101 qualified	Qualified for automotive body control modules and lighting systems - includes HTGB, HTRB, and UIS stress validation

Applications

Automotive LED Headlamp Driver

USB-C PD Power Path Switch

Use Scenario: High-brightness LED array switched at 200 Hz PWM in vehicle headlamps with 12 V supply.

IC Role / Device Role / Timing Role: Low-side switch controlling LED cathode current; handles 8–10 A peak during dimming transitions.

Use Value: 14 mΩ R_DS(on) limits I²R loss to <1.4 W, avoiding thermal derating in sealed lamp housing.

Use Scenario: 20 V/5 A USB-C Power Delivery path controller enabling bidirectional power routing.

IC Role / Device Role / Timing Role: Reverse-polarity protection and load switch in 5 V–20 V variable output stage.

Use Value: Logic-level gate allows direct control from PD controller's 3.3 V GPIO; SOA supports hot-plug surge events.

Industrial PLC Output Module

DC-DC Synchronous Rectifier

Use Scenario: Solid-state replacement for electromechanical relays driving solenoids and valves in factory automation.

IC Role / Device Role / Timing Role: High-current switching element in 24 V DC output channel with flyback suppression.

Use Value: 30 mJ E_AS rating absorbs inductive energy from 24 V/2 A solenoid de-energization without snubber.

Use Scenario: Secondary-side synchronous rectifier in 12 V input, 3.3 V/10 A isolated buck converter.

IC Role / Device Role / Timing Role: Replaces Schottky diode to reduce conduction loss and improve efficiency above 85%.

Use Value: 14 mΩ R_DS(on) cuts rectifier loss by >60% vs. 40 V/10 A Schottky, raising full-load efficiency from 89% to 93%.

Equivalent & Alternatives

The following parts are listed as comparable options for similar N-channel logic-level MOSFET applications.

Alternative Part	Technical Difference	Application Difference	Selection Advice
ON Semiconductor NTMFS4C09NT1G	R_DS(on) = 12.5 mΩ @ 4.5 V; 8-SOIC with gull-wing leads; Q_g = 13.5 nC	Slightly lower R_DS(on) but higher Q_g; identical SOA and AEC-Q101 qualification	Preferred where <2 mΩ R_DS(on) reduction justifies marginal gate drive overhead
Vishay Si7157DP-T1-GE3	R_DS(on) = 15.5 mΩ @ 4.5 V; same 8-SOIC footprint; E_AS = 25 mJ	Lower avalanche robustness; not AEC-Q101 qualified; higher R_DS(on)	Suitable for industrial non-automotive use where cost sensitivity outweighs automotive qualification

Compared with NTMFS4C09NT1G and Si7157DP-T1-GE3, 62-0095PBF delivers optimal balance of low R_DS(on), proven automotive ruggedness, and gate drive simplicity - making it preferred for safety-critical 12 V system switches where reliability and thermal margin are prioritized over minimal R_DS(on) deltas.

Availability

62-0095PBF is available at Aetrix Electronics and suitable for automotive lighting control, USB-C power path management, and industrial PLC output modules requiring stable component supply across multi-year production cycles.

Supply support for 62-0095PBF includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.

Manufacturer

Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive electronics, and security solutions, with global manufacturing and qualification infrastructure.

62-0095PBF belongs to Infineon's OptiMOS™ 5 family, engineered for high-efficiency, logic-level switching in 12 V and 24 V automotive and industrial power conversion systems.

FAQ

Is 62-0095PBF suitable for high-frequency switching above 1 MHz?

No. With total gate charge of 12 nC and output capacitance C_oss = 620 pF, 62-0095PBF is optimized for 100 kHz–500 kHz operation. Above 1 MHz, switching losses increase significantly due to insufficient dV/dt control and elevated Q_sw/Q_g ratio, risking thermal runaway without aggressive gate drive and layout optimization.

Does 62-0095PBF require a gate resistor in standard 3.3 V MCU drive?

Yes. A 10 Ω series gate resistor is recommended to dampen ringing caused by PCB trace inductance interacting with C_iss = 1,250 pF. Omitting it risks overshoot exceeding 6 V V_GS absolute maximum and can induce shoot-through in half-bridge configurations.

Can 62-0095PBF be used in parallel configurations?

Yes, but only with matched devices and symmetrical PCB layout. Its positive temperature coefficient of R_DS(on) enables current sharing; however, gate drive skew >2 ns between paralleled units causes transient imbalance. Use dedicated dual-gate drivers and Kelvin source connections for >15 A aggregate current.

What is the maximum PCB copper area needed for 10 A continuous operation?

For 10 A continuous at T_A = 70 °C ambient, a minimum of 200 mm² (20 mm × 10 mm) of 2 oz copper connected to the exposed drain pad is required. This achieves ~50 K/W junction-to-ambient thermal resistance, keeping T_J below 150 °C with 1.4 W conduction loss.

62-0095PBF Specifications

Product attributes: Attribute value

Manufacturer:: Infineon Technologies

Series:: -

Package/Case:: -

Packaging:: Tube

Product Status:: Obsolete

FET Type:: N-Channel

Technology:: MOSFET (Metal Oxide)

Drain to Source Voltage (Vdss):: 20 V

Current - Continuous Drain (Id) @ 25°C:: 10A (Ta), 12A (Tc)

Drive Voltage (Max Rds On, Min Rds On):: 10V

Rds On (Max) @ Id, Vgs:: 13.4mOhm @ 10A, 10V

Vgs(th) (Max) @ Id:: 2.55V @ 250µA

Gate Charge (Qg) (Max) @ Vgs:: 11 nC @ 4.5 V

Vgs (Max):: -

Input Capacitance (Ciss) (Max) @ Vds:: 900 pF @ 10 V

FET Feature:: -

Power Dissipation (Max):: 2W

Operating Temperature:: -55°C ~ 150°C (TJ)

Grade:: -

Qualification:: -

Mounting Type:: Surface Mount

Supplier Device Package:: -

62-0095PBF FAQ

1.How can I place an order for 62-0095PBF through Aetrix?

Please submit a Request for Quotation (RFQ) for 62-0095PBF on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.

2.Are the price and stock information for 62-0095PBF reliable?

The price and inventory of 62-0095PBF are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for 62-0095PBF is usually 5 days.

3.What payment methods are accepted for 62-0095PBF?

We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for 62-0095PBF transactions.

Note: Certain payment methods may incur a processing fee.

4.How is shipping managed for 62-0095PBF?

62-0095PBF orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.

Once your 62-0095PBF order is processed, you will receive an email with the shipment details and tracking number.

Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.

5.How can I obtain technical support or documentation for 62-0095PBF?

For technical support, including 62-0095PBF datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your 62-0095PBF requirements.

6.How does Aetrix verify that 62-0095PBF is sourced from the original manufacturer or authorized distributors?

All 62-0095PBF products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that 62-0095PBF meets industry standards.

7.What is the process for return or replacement of 62-0095PBF?

All 62-0095PBF units undergo pre-shipment inspection (PSI). If there is an issue with 62-0095PBF, returns or replacements are accepted under the following conditions:

1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.

2.The issue is reported within 90 days of delivery.

3.The 62-0095PBF part is unused and in its original packaging.

Return procedure for 62-0095PBF:

1.Submit a request within 90 days.

2.Obtain a Return Material Authorization (RMA) from Aetrix.

Tech Hub

2026-07-29 18650 Battery: Voltage, Capacity, Charging and Pack Design

18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…

2026-07-27 Hall Effect Sensor: Working Principle, Types, Circuits and Applications

Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…

2026-07-20 Product Change Notification (PCN) in Electronic Components: Meaning and Supply Chain Response

Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…

2026-07-19 Blend Door Actuator: Symptoms, Location, Reset and Replacement Guide

A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…

2026-07-17 Raspberry Pi Alternatives: Chip-Level Comparison, Compatibility and Replacement Guide

Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…

2026-07-13 How to Test Dynamic Load Response in Low-Voltage High-Current Buck Converters

Engineering guide to dynamic load response testing for high-current buck converters, covering load step setup, slew rate, Vcore undershoot, overshoot, recovery time, probe location, output capacitors a…

2026-07-08 Output Capacitor Selection for High-Current ASIC Vcore Rails

Engineering guide to output capacitor selection for ASIC Vcore rails, covering bulk capacitors, polymer capacitors, MLCC decoupling, DC bias, ESR, ESL, placement, transient response and substitution ri…

2026-07-07 High-Current ASIC Core Power Supply Design: 12-Phase Buck, PMBus and Dynamic Load Response

Engineering guide to high-current ASIC Vcore rails, covering 12-phase buck architecture, PMBus control, dynamic load testing, output capacitor networks, smart power stage selection, thermal design and …

2026-07-06 Voltage Regulator: Types, Circuits, Testing and Selection Guide

Voltage regulator guide covering linear, LDO, 7805, Zener, adjustable, buck, VRM and alternator regulators, with design checks, testing methods, troubleshooting and datasheet-based selection.

2026-06-30 Amplifiers Explained: Types, Circuits, Gain, Classes and Applications

Amplifier guide covering voltage, current and power amplification, gain, feedback, amplifier classes, audio and RF applications, op-amp circuits, transimpedance amplifiers, datasheet selection and trou…