My Inquiry
My Account
Nexperia USA Inc. BAS16J-QX
- Part No.:
- BAS16J-QX
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Single Diodes
- Package:
- SC-90, SOD-323F
- Datasheet:
-
BAS16J-QX.pdf
- Description:
- BAS16J-Q/SOD323F/SOD323F
- Quantity:
- Payment:
- Shipping:
Inventory:299
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BAS16J-QX from Nexperia is a high-speed switching diode in SOD323F (SC-90) package, rated for 100 V reverse voltage, 4 ns reverse recovery time, and 250 mA forward current. It serves as a fast-switching signal path component in automotive power management and communication interface circuits where low capacitance (1.5 pF) and low leakage (0.5 µA at 80 V) are critical.
For engineers reviewing the BAS16J-QX datasheet, BAS16J-QX pinout, BAS16J-QX application, or BAS16J-QX equivalent, this page delivers verified electrical parameters, AEC-Q101 qualification status, thermal resistance values (Rth(j-a) = 230 K/W), and real-world use context for automotive-grade discrete selection.
Technical Context
This diode operates as a unidirectional, single-junction silicon switching element with cathode-anode polarity defined per SC-90 pinning. Its 4 ns trr enables reliable operation in 100+ MHz digital signal routing and flyback snubbing up to 1 MHz switching frequencies.
Thermal design relies on its 55 K/W junction-to-solder-point resistance and 150 °C maximum junction temperature. The device is characterized under pulsed conditions (δ ≤ 0.02, tp ≤ 300 µs), with VF specified at 1.25 V @ 150 mA and Cd measured at 1.5 pF @ 0 V, 1 MHz.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Voltage (VR) | 100 V - supports 24 V and 48 V automotive bus protection without derating. |
| Reverse Recovery Time (trr) | 4 ns - enables clean edge transitions in high-frequency logic-level translation and clamping. |
| Forward Voltage (VF) | 1.25 V @ 150 mA - minimizes conduction loss in low-duty-cycle pulse applications. |
| Diode Capacitance (Cd) | 1.5 pF @ 0 V, 1 MHz - preserves signal integrity in RF-coupled and high-speed data lines. |
| Reverse Leakage (IR) | 0.5 µA @ 80 V, 25 °C - ensures stable biasing in precision sensor front-ends and reference dividers. |
| Thermal Resistance (Rth(j-a)) | 230 K/W - defines minimum PCB copper area needed for ambient-limited thermal management. |
Pinout & Package
Package: SOD323F (SC-90), surface-mounted plastic package measuring 1.7 mm × 1.25 mm × 0.7 mm, qualified per AEC-Q101 for automotive use.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Cathode (K) | Connected to higher-potential node during reverse bias; primary heat path to PCB via cathode pad. |
| 2 | Anode (A) | Current entry point during forward conduction; referenced to ground or low-side return paths. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive underhood environments (−40 °C to +150 °C) with zero defect screening. |
| Low trr (≤ 4 ns) | Reduces switching losses and prevents shoot-through in synchronous rectifier and level-shift circuits. |
| Small SOD323F footprint | Enables dense layout in space-constrained ADAS modules and infotainment power rails. |
| Low Cd (1.5 pF) | Maintains >1 GHz bandwidth in ESD protection networks and high-speed GPIO clamping. |
Applications
| Automotive Body Control Module | USB 2.0 Data Line Protection |
|---|---|
Use Scenario: Clamping transient spikes on LIN bus lines during load dump events. IC Role / Device Role / Timing Role: Fast-recovery diode in parallel TVS-assisted protection network. Use Value: 4 ns trr ensures minimal delay between surge onset and clamping activation, preserving signal fidelity. |
Use Scenario: ESD suppression on D+/D− lines before USB transceiver input. IC Role / Device Role / Timing Role: Low-capacitance steering diode in I/O protection array. Use Value: 1.5 pF Cd avoids signal rise-time degradation beyond USB 2.0 specification (≤ 1.5 ns). |
| DC-DC Converter Snubber | Industrial Sensor Signal Conditioning |
Use Scenario: Absorbing leakage inductance energy in flyback transformer secondary. IC Role / Device Role / Timing Role: High-speed freewheeling path during MOSFET turn-off. Use Value: 100 V VR rating accommodates reflected voltage spikes up to 85 V in 24 V input designs. |
Use Scenario: Precision voltage clamping in thermistor-based temperature measurement bridges. IC Role / Device Role / Timing Role: Reverse-biased reference limiter for analog front-end inputs. Use Value: 0.5 µA IR at 80 V prevents measurable offset drift in µA-level bridge currents. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar high-speed switching diode applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| ON Semiconductor NSVRBAS16WT1G | Same SOD-323 package, 4 ns trr, but lower VR (70 V) and higher IR (1 µA @ 50 V). | Suitable only for ≤ 24 V systems; not recommended for 48 V automotive power domains. | Select when cost sensitivity outweighs 100 V margin and AEC-Q101 traceability is non-mandatory. |
| Vishay BAV199,215 | SC-70 package, 4 ns trr, 100 V VR, but higher Cd (2.5 pF) and no AEC-Q101 certification. | Acceptable for industrial control, but excluded from automotive safety-critical subsystems. | Choose only for legacy board redesigns where SC-70 footprint compatibility is required. |
Compared with NSVRBAS16WT1G and BAV199,215, BAS16J-QX uniquely combines AEC-Q101 qualification, 100 V rating, 1.5 pF capacitance, and SOD323F footprint-making it the sole option for new automotive designs requiring full compliance and minimal parasitic loading.
Availability
BAS16J-QX is available at Aetrix Electronics and suitable for automotive body electronics, USB interface protection, DC-DC snubbing, and industrial sensor conditioning requiring stable component supply across extended temperature ranges and long production lifecycles.
Supply support for BAS16J-QX includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in automotive-qualified components and advanced packaging.
BAS16J-QX belongs to Nexperia's AEC-Q101-qualified high-speed diode product line, engineered specifically for automotive signal integrity, ESD robustness, and thermal resilience in compact SMD form factors.
FAQ
Is BAS16J-QX pin-compatible with BAS16,115?
No. BAS16J-QX uses the SOD323F (SC-90) package with 1.7 mm × 1.25 mm footprint and cathode-anode pinout (Pin 1 = K, Pin 2 = A). BAS16,115 is in SOT23 package with different pin assignment and larger dimensions (2.9 mm × 1.3 mm), making them mechanically and layout-incompatible.
What is the maximum continuous forward current for BAS16J-QX at 85 °C ambient?
The maximum continuous forward current is derated from 250 mA at 25 °C to approximately 180 mA at 85 °C ambient, based on its 550 mW total power dissipation limit and Rth(j-a) of 230 K/W. This assumes standard FR4 PCB mounting with 1 cm² cathode pad copper area.
Does BAS16J-QX require special reflow profile considerations?
Yes. Per Nexperia's SOD323F footprint guidelines, peak reflow temperature must not exceed 260 °C for ≤ 10 seconds, with ramp-up rate ≤ 3 °C/s. The recommended solder land pattern (0.6 mm × 0.5 mm pads, 0.8 mm center-to-center) ensures reliable wetting without tombstoning.
Can BAS16J-QX be used in bidirectional ESD protection configurations?
No. BAS16J-QX is a unidirectional diode. For bidirectional ESD protection, two devices must be connected anode-to-anode or cathode-to-cathode in series. Its 100 V VR rating applies only in reverse bias; forward conduction occurs above ~0.7 V, limiting clamping symmetry.
BAS16J-QX Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- SC-90, SOD-323F
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Technology:
- Standard
- Voltage - DC Reverse (Vr) (Max):
- 100 V
- Current - Average Rectified (Io):
- 250mA
- Voltage - Forward (Vf) (Max) @ If:
- 1.25 V @ 150 mA
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- 4 ns
- Current - Reverse Leakage @ Vr:
- 500 nA @ 80 V
- Capacitance @ Vr, F:
- 1.5pF @ 0V, 1MHz
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOD-323F
- Operating Temperature - Junction:
- 150°C
BAS16J-QX FAQ
1.How can I place an order for BAS16J-QX through Aetrix?
Please submit a Request for Quotation (RFQ) for BAS16J-QX on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BAS16J-QX reliable?
The price and inventory of BAS16J-QX are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BAS16J-QX is usually 5 days.
3.What payment methods are accepted for BAS16J-QX?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BAS16J-QX transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BAS16J-QX?
BAS16J-QX orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BAS16J-QX order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BAS16J-QX?
For technical support, including BAS16J-QX datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BAS16J-QX requirements.
6.How does Aetrix verify that BAS16J-QX is sourced from the original manufacturer or authorized distributors?
All BAS16J-QX products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BAS16J-QX meets industry standards.
7.What is the process for return or replacement of BAS16J-QX?
All BAS16J-QX units undergo pre-shipment inspection (PSI). If there is an issue with BAS16J-QX, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BAS16J-QX part is unused and in its original packaging.
Return procedure for BAS16J-QX:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BAS16J-QX Tags
-
1N4448X-TP
Micro Commercial Co
-
1N4148WX-TP
Micro Commercial Co
-
1N4148TR
onsemi
-
MMSD4148T1G
onsemi
-
MMBD914LT3G
onsemi
-
BAS16HT1G
onsemi
-
1N914BWT
onsemi
-
BAS21LT1G
onsemi
-
LL4148
onsemi
-
BAS16LT1G
onsemi
-
MMSD914T1G
onsemi
-
BAV21W-7-F
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
