My Inquiry
My Account
Infineon Technologies BAT5405WH6327XTSA1
- Part No.:
- BAT5405WH6327XTSA1
- Manufacturer:
- Infineon Technologies
- Category:
- Diode Arrays
- Package:
- SC-70, SOT-323
- Datasheet:
-
BAT5405WH6327XTSA1.pdf
- Description:
- DIODE ARR SCHOT 30V 200MA SOT323
- Quantity:
- Payment:
- Shipping:
Inventory:109,565
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BAT5405WH6327XTSA1 from Infineon Technologies is a silicon Schottky diode in SOT-323 (SC-70) package, configured as a single anode-cathode junction with 30 V reverse voltage rating, 200 mA forward current capability, and ultrafast 5 ns reverse recovery time. It delivers low forward voltage drop (400 mV at 10 mA), <10 pF capacitance at 1 V, and AEC-Q101 qualification for automotive bias isolation and clamping circuits.
For engineers reviewing the BAT5405WH6327XTSA1 datasheet, BAT5405WH6327XTSA1 pinout, BAT5405WH6327XTSA1 application, or BAT5405WH6327XTSA1 equivalent, this part supports high-speed signal clamping in automotive infotainment power rails, low-loss DC bias networks in sensor interfaces, and ESD-sensitive analog front-ends where thermal robustness and fast switching are critical.
Technical Context
This Schottky diode uses a guard-ring protected silicon junction to suppress edge breakdown and ensure stable reverse leakage (<2 µA at 25 V). Its low series inductance (1.4 nH) and optimized metallization support clean transient response in high-frequency clamp paths.
The device operates across −65 °C to +150 °C junction temperature range with 110 K/W junction-to-soldering-point thermal resistance, enabling reliable performance in thermally constrained automotive PCB layouts without forced cooling.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| Reverse Voltage (VR) | 30 V - Supports clamping in 24 V automotive systems with 25 % margin against transients. |
| Forward Current (IF) | 200 mA continuous - Sufficient for bias current in op-amp input protection and level-shifting networks. |
| Forward Voltage (VF) | 400 mV at 10 mA - Minimizes power loss and self-heating in always-on sensor bias paths. |
| Reverse Recovery Time (trr) | 5 ns - Enables use in >10 MHz signal clamping without distortion or ringing. |
| Diode Capacitance (CT) | 10 pF at 1 V, 1 MHz - Preserves bandwidth in RF detector and high-speed logic interface applications. |
| Thermal Resistance (RthJS) | 110 K/W - Allows 150 °C junction operation with ≤48 °C board temperature rise under full load. |
| Leakage Current (IR) | 2 µA max at 25 V - Ensures minimal error current in precision reference and feedback divider networks. |
Pinout & Package
SOT-323 (SC-70) plastic surface-mount package, 3-pin configuration with pin 1 = anode, pin 2 = cathode, pin 3 = unused (internal die pad not connected).
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 | Anode | Input terminal for forward conduction; connects to higher-potential node in clamping or isolation path. |
| Pin 2 | Cathode | Output/return terminal; ties to reference rail (e.g., VCC or GND) in active clamp configurations. |
| Pin 3 | Not connected | No internal bond wire; must remain floating or grounded per layout best practices to avoid parasitic coupling. |
Key Features
| Feature | Design Value |
|---|---|
| AEC-Q101 qualified | Validated for automotive powertrain and body electronics per stress test requirements including HTOL and TC. |
| Guard ring protection | Eliminates premature edge breakdown under high dv/dt, improving long-term reliability in noisy environments. |
| Pb-free / RoHS compliant | Meets EU Directive 2011/65/EU; compatible with lead-free reflow profiles up to 260 °C peak. |
| Low VF temperature coefficient | VF drift <0.2 mV/°C over −40 °C to +125 °C - maintains stable clamping threshold across operating range. |
Applications
| Automotive Sensor Biasing | USB Port ESD Clamping |
|---|---|
Use Scenario: Providing stable DC bias to Hall-effect and thermistor sensors in engine control modules. IC Role / Device Role / Timing Role: Low-loss forward path isolator that prevents reverse current flow while minimizing voltage drop on supply lines. Use Value: 400 mV VF at 10 mA ensures ≥98 % of nominal 5 V bias reaches sensor, preserving measurement accuracy. |
Use Scenario: Protecting USB 2.0 data lines (D+/D−) from ±8 kV contact ESD per IEC 61000-4-2. IC Role / Device Role / Timing Role: Fast-turn-on clamping diode shunting transient energy to ground before IC input structures fail. Use Value: 5 ns trr and 10 pF CT enable sub-nanosecond response without signal integrity degradation at 480 Mbps. |
| Industrial Analog Front-End Protection | DC-DC Converter Feedback Isolation |
Use Scenario: Guarding ADC inputs and op-amp rails in programmable logic controllers exposed to field wiring transients. IC Role / Device Role / Timing Role: Bidirectional clamp (anode-to-rail, cathode-to-ground) limiting overvoltage to safe levels during surge events. Use Value: 2 µA IR at 25 V prevents measurable offset error in 12-bit+ measurement chains with MΩ-scale input impedance. |
Use Scenario: Isolating feedback resistors in isolated flyback converters to prevent regulation loop corruption during primary-side transients. IC Role / Device Role / Timing Role: Reverse-biased blocking element preventing current backfeed from optocoupler side into resistor divider. Use Value: 30 V VR rating exceeds typical 24 V auxiliary supplies, ensuring no conduction during normal operation. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar Schottky diode applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| SBAT54DWHT1G | Same SOT-323 package, dual common-cathode configuration; VF = 420 mV @ 10 mA; trr = 6 ns. | Requires redesign for single-diode footprint; suited for dual-rail clamping (e.g., RS-485 bus). | Select when dual-channel protection is needed and board space permits shared cathode routing. |
| BAT54C,215 | SOT-23 package, common-cathode dual; VF = 370 mV @ 10 mA; trr = 5 ns; RthJS = 245 K/W. | Larger thermal resistance limits continuous current in compact layouts; not AEC-Q101 qualified. | Acceptable for non-automotive industrial use where cost is prioritized over thermal performance and qualification. |
Compared with SBAT54DWHT1G and BAT54C,215, BAT5405WH6327XTSA1 offers superior thermal resistance (110 K/W), guaranteed AEC-Q101 compliance, and exact single-diode SOT-323 fit-making it optimal for space-constrained, safety-critical automotive clamping.
Availability
BAT5405WH6327XTSA1 is available at Aetrix Electronics and suitable for automotive sensor modules, USB interface protection circuits, and industrial analog front-end designs requiring stable component supply with full traceability and lifecycle management.
Supply support for BAT5405WH6327XTSA1 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Infineon Technologies is a German semiconductor manufacturer specializing in power management, automotive electronics, and industrial control ICs and discrete devices.
BAT5405WH6327XTSA1 belongs to the BAT54 family of Schottky diodes engineered specifically for high-reliability automotive signal conditioning and power rail protection applications.
FAQ
Is BAT5405WH6327XTSA1 pin-compatible with BAT54W?
No. BAT5405WH6327XTSA1 uses SOT-323 (3-pin) packaging with pins 1–2 active, while BAT54W uses SOT-323 but is a single-diode variant with identical pinout. However, BAT54W has higher RthJS (125 K/W) and lower IF rating (150 mA), making direct substitution thermally risky at full load.
What is the maximum allowable soldering temperature profile?
The device complies with IPC/JEDEC J-STD-020D for lead-free reflow: peak temperature 260 °C for ≤30 seconds, with ramp-up rate ≤3 °C/s and ramp-down rate ≤6 °C/s. Preheat (150–200 °C) must last 60–120 seconds to avoid moisture-induced delamination.
Does BAT5405WH6327XTSA1 support bidirectional ESD protection?
No. As a single-junction Schottky diode, it conducts only in forward direction. For bidirectional protection, two devices must be placed in series opposition (anode-to-anode or cathode-to-cathode), or a dedicated TVS array like ESD5Z5.0T1G should be used.
How does its 110 K/W RthJS compare to standard SOT-23 diodes?
Standard SOT-23 Schottky diodes (e.g., BAT54) exhibit RthJS ≈ 245 K/W due to larger die attach area and less efficient thermal path. BAT5405WH6327XTSA1's 110 K/W reflects optimized die pad design and thinner mold compound, enabling 2.2× higher power dissipation at equal board temperature rise.
BAT5405WH6327XTSA1 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Infineon Technologies
- Series:
- -
- Package/Case:
- SC-70, SOT-323
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Active
- Diode Configuration:
- 1 Pair Common Cathode
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 30 V
- Current - Average Rectified (Io) (per Diode):
- 200mA (DC)
- Voltage - Forward (Vf) (Max) @ If:
- 800 mV @ 100 mA
- Speed:
- Small Signal =< 200mA (Io), Any Speed
- Reverse Recovery Time (trr):
- 5 ns
- Current - Reverse Leakage @ Vr:
- 2 µA @ 25 V
- Operating Temperature - Junction:
- 150°C (Max)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- PG-SOT323
BAT5405WH6327XTSA1 FAQ
1.How can I place an order for BAT5405WH6327XTSA1 through Aetrix?
Please submit a Request for Quotation (RFQ) for BAT5405WH6327XTSA1 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BAT5405WH6327XTSA1 reliable?
The price and inventory of BAT5405WH6327XTSA1 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BAT5405WH6327XTSA1 is usually 5 days.
3.What payment methods are accepted for BAT5405WH6327XTSA1?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BAT5405WH6327XTSA1 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BAT5405WH6327XTSA1?
BAT5405WH6327XTSA1 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BAT5405WH6327XTSA1 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BAT5405WH6327XTSA1?
For technical support, including BAT5405WH6327XTSA1 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BAT5405WH6327XTSA1 requirements.
6.How does Aetrix verify that BAT5405WH6327XTSA1 is sourced from the original manufacturer or authorized distributors?
All BAT5405WH6327XTSA1 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BAT5405WH6327XTSA1 meets industry standards.
7.What is the process for return or replacement of BAT5405WH6327XTSA1?
All BAT5405WH6327XTSA1 units undergo pre-shipment inspection (PSI). If there is an issue with BAT5405WH6327XTSA1, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BAT5405WH6327XTSA1 part is unused and in its original packaging.
Return procedure for BAT5405WH6327XTSA1:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BAT5405WH6327XTSA1 Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
LDO regulator guide covering low dropout voltage, power dissipation, thermal design, PSRR, output noise, capacitor stability, adjustable LDO circuits, LDO vs buck converter and datasheet selection chec…
Conditional Access Module guide covering CAM meaning, CI/CI+ interface, smart card authorization, DVB security workflow, TV and set-top box compatibility, internal electronics, ESD protection, connecto…
Guide to electronic component obsolescence covering EOL risk, PCN/PDN notices, last-time buy planning, replacement options, form-fit-function validation, counterfeit risk and BOM lifecycle management.
18650 battery guide covering lithium-ion cell basics, 3.6V/3.7V voltage, 4.2V charging, mAh and Wh capacity, protected cells, chargers, BMS, series-parallel packs, holders, welding and sourcing checks.…
Hall effect sensor guide covering working principle, linear and digital sensors, Arduino circuits, current sensing, speed detection, automotive applications, A3144 examples, signal filtering and datash…
Product Change Notification guide for electronic components, covering PCN meaning, PCN vs PDN/EOL, common change types, risk levels, form-fit-function review, engineering validation, BOM control, LTB/L…
A practical guide to blend door actuators, covering HVAC function, symptoms, location, AC and heater issues, reset and calibration, replacement cost, electrical diagnosis, compatibility checks, and rep…
Engineering guide to Raspberry Pi alternatives, covering chip-level differences, Orange Pi, ROCK, Jetson, Banana Pi, NanoPi, Compute Module, Pico, GPIO, camera, HAT compatibility, and replacement risks…
