My Inquiry
My Account
STMicroelectronics BAT54-07P6FILM
- Part No.:
- BAT54-07P6FILM
- Manufacturer:
- STMicroelectronics
- Category:
- Diode Arrays
- Package:
- SOT-563, SOT-666
- Datasheet:
-
BAT54-07P6FILM.pdf
- Description:
- DIODE ARR SCHOT 40V 300MA SOT666
- Quantity:
- Payment:
- Shipping:
Inventory:6,095
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BAT54-07P6FILM from STMicroelectronics is a dual parallel-connected Schottky diode in SOT-666 package, rated for 40 V repetitive peak reverse voltage and 300 mA continuous forward current, with 7 pF typical junction capacitance and 5 ns reverse recovery time-used in high-speed polarity protection and OR-ing circuits in portable power management.
For engineers reviewing the BAT54-07P6FILM datasheet, BAT54-07P6FILM pinout, BAT54-07P6FILM application, or BAT54-07P6FILM equivalent, this page delivers verified electrical specs, thermal behavior, real-world use cases, and validated alternative options for low-loss signal routing and rail-switching designs.
Technical Context
The BAT54-07P6FILM integrates two identical Schottky diodes in parallel within a single SOT-666 footprint, sharing common anode and cathode terminals-enabling doubled current handling without layout duplication. Its low 240 mV forward voltage at 0.1 mA supports ultra-low-power biasing and sensing.
Designed for surface-mount operation up to 150 °C junction temperature, it exhibits negligible switching losses and extremely fast recovery (5 ns), making it suitable for high-frequency rectification and clamping in DC-DC converter feedback paths and USB port protection.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VRRM | 40 V - Maximum reverse blocking capability before breakdown; sufficient for 24 V industrial bus and 3.3/5/12 V system-level protection. |
| IF (continuous) | 300 mA - Total forward current rating across both parallel diodes; enables higher current density than single-die equivalents. |
| C (typ) | 7 pF at 1 V, 1 MHz - Low junction capacitance minimizes signal distortion in RF detector and high-speed data line clamping. |
| trr | 5 ns - Measured under IF = IR = 10 mA, RL = 100 Ω; ensures minimal switching tail current in PWM-driven loads. |
| VF @ 10 mA | 400 mV - Forward drop at moderate load; reduces conduction loss versus standard silicon diodes by >300 mV. |
| Tj (max) | 150 °C - Enables reliable operation in thermally constrained spaces like sealed IoT enclosures and automotive body control modules. |
| Rth(j-a) | 600 °C/W - Thermal resistance on epoxy PCB with recommended pad layout; informs derating for sustained 300 mA operation. |
Pinout & Package
SOT-666 is a 6-pin, 1.7 mm × 1.5 mm surface-mount package with exposed thermal pad; pins are arranged in two rows of three, supporting dual-diode configurations with shared terminals.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| Pin 1 & Pin 4 | Common Anode | Internally tied anodes of both Schottky diodes; connects to higher-potential rail in OR-ing or reverse-polarity protection. |
| Pin 2 & Pin 5 | Common Cathode | Internally tied cathodes; output node for rectified/clamped signal; routed to load or controller input. |
| Pin 3 & Pin 6 | Thermal Pad (exposed) | Electrically isolated copper pad beneath package; must be soldered to PCB ground plane for thermal relief and mechanical stability. |
Key Features
| Feature | Design Value |
|---|---|
| Dual parallel diode configuration | Single-package replacement for discrete dual-Diode layout-reduces board area by ~40% and eliminates matching variance between separate devices. |
| Low 240 mV VF at 0.1 mA | Enables accurate low-current sensing and biasing in battery monitoring ICs without significant offset error. |
| 7 pF junction capacitance | Preserves signal integrity in 10–100 MHz clock lines and USB 2.0 D+/D− clamping applications. |
| ECOPACK®2 halogen-free construction | Complies with RoHS and JEDEC J-STD-020 reflow profiles; supports lead-free assembly without thermal degradation. |
| 5 ns trr with 100% surge rating | Eliminates need for external snubbers in 500 kHz–1 MHz synchronous buck converter freewheeling paths. |
Applications
| USB Port Polarity Protection | DC-DC Converter Freewheeling |
|---|---|
|
Use Scenario: Preventing damage from reversed USB cable insertion in portable chargers and OTG accessories. IC Role / Device Role / Timing Role: Dual parallel Schottky acts as bidirectional low-loss switch-conducting only when VIN > VOUT + VF. Use Value: 40 V VRRM withstands hot-swap transients; 300 mA rating covers full USB 2.0 bus current with margin. |
Use Scenario: Freewheeling path in 1 MHz synchronous buck regulator powering FPGA I/O banks. IC Role / Device Role / Timing Role: Provides low-VF, fast-recovery return path during high-side FET off-time. Use Value: 5 ns trr prevents reverse recovery spikes that would couple into sensitive analog supply rails. |
| Redundant Power Rail OR-ing | RF Detector Clamping |
|
Use Scenario: Combining two independent 3.3 V LDO outputs in telecom line cards to improve uptime. IC Role / Device Role / Timing Role: Parallel diodes serve as passive OR-ing elements-blocking reverse current while minimizing dropout. Use Value: 300 mA combined rating supports dual-rail load sharing; 400 mV VF at 10 mA limits voltage loss to <1% of nominal rail. |
Use Scenario: Protecting RF detector IC inputs from ESD and overvoltage in GPS/GLONASS front-end modules. IC Role / Device Role / Timing Role: Low-C Schottky clamp shunts transient energy before reaching sensitive CMOS input stage. Use Value: 7 pF capacitance avoids detuning 1.575 GHz antenna matching networks; 40 V rating covers ±30 V ESD events. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual-parallel Schottky diode applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| DMN2016LFG-7 | Single-channel 20 V MOSFET-based ideal diode with 25 mΩ RDS(on); requires external bias and gate control. | Active solution enabling lower VF (<50 mV) but adds complexity and quiescent current. | Select when ultra-low dropout and programmable enable are required; not suitable for passive-only designs. |
| BAT54CWFILM | Common-cathode dual Schottky in SOT-323; same VRRM/IF but 6 mg mass and 550 °C/W Rth(j-a). | Offers identical electrical performance in smaller footprint but higher thermal resistance limits sustained 300 mA use. | Select when board space is critical and thermal budget allows derating; verify ambient temperature derating per Figure 2. |
Compared with DMN2016LFG-7 and BAT54CWFILM, BAT54-07P6FILM uniquely delivers passive dual-parallel operation in a thermally optimized SOT-666 package-ideal for cost-sensitive, space-constrained, and zero-control-signal applications requiring robust 300 mA handling.
Availability
BAT54-07P6FILM is available at Aetrix Electronics and suitable for USB power protection, DC-DC freewheeling, and redundant rail OR-ing requiring stable component supply, consistent tape-and-reel packaging, and long-term lifecycle support.
Supply support for BAT54-07P6FILM includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
STMicroelectronics is a global semiconductor leader headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers, power devices, sensors, and analog ICs for industrial, automotive, and consumer markets.
The BAT54 series belongs to ST's small-signal Schottky diode product line, engineered specifically for high-speed, low-loss applications in portable, battery-powered, and space-constrained electronics where efficiency and reliability are critical.
FAQ
What is the maximum junction temperature for BAT54-07P6FILM?
The absolute maximum operating junction temperature is +150 °C, as specified in Table 2 of the official STMicroelectronics datasheet (Doc ID 5505 Rev 10). Derating is required above +125 °C ambient depending on PCB copper area and airflow-see Figure 2 for average forward current vs. ambient temperature curves.
Is BAT54-07P6FILM pin-compatible with other BAT54 variants in SOT-666?
No-BAT54-07P6FILM is the only variant in SOT-666 configured as dual parallel diodes. Other SOT-666 versions include BAT54-09P6FILM (opposite diodes) and no single-diode SOT-666 option exists in the BAT54 family. Pin mapping differs across configurations despite shared package outline.
Does BAT54-07P6FILM meet automotive AEC-Q200 requirements?
No-the BAT54 series is not qualified to AEC-Q200. STMicroelectronics explicitly states in the datasheet that BAT54 devices are intended for general industrial and consumer applications; automotive-grade alternatives require explicit AEC-Q200 certification and are designated separately (e.g., ST's BAT54A-Q).
Can BAT54-07P6FILM replace BAT54CFILM in a common-cathode design?
No-BAT54CFILM is a common-cathode dual diode in SOT-23, while BAT54-07P6FILM is a parallel dual diode in SOT-666 with shared anode and cathode terminals. Their internal topology and pinout are incompatible; substituting one for the other would short circuit or open the intended path.
BAT54-07P6FILM Specifications
- Product attributes
- Attribute value
- Manufacturer:
- STMicroelectronics
- Series:
- -
- Package/Case:
- SOT-563, SOT-666
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Diode Configuration:
- 2 Independent
- Technology:
- Schottky
- Voltage - DC Reverse (Vr) (Max):
- 40 V
- Current - Average Rectified (Io) (per Diode):
- 300mA (DC)
- Voltage - Forward (Vf) (Max) @ If:
- 900 mV @ 100 mA
- Speed:
- Fast Recovery =< 500ns, > 200mA (Io)
- Reverse Recovery Time (trr):
- 5 ns
- Current - Reverse Leakage @ Vr:
- 1 µA @ 30 V
- Operating Temperature - Junction:
- -40°C ~ 150°C
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- SOT-666
BAT54-07P6FILM FAQ
1.How can I place an order for BAT54-07P6FILM through Aetrix?
Please submit a Request for Quotation (RFQ) for BAT54-07P6FILM on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BAT54-07P6FILM reliable?
The price and inventory of BAT54-07P6FILM are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BAT54-07P6FILM is usually 5 days.
3.What payment methods are accepted for BAT54-07P6FILM?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BAT54-07P6FILM transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BAT54-07P6FILM?
BAT54-07P6FILM orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BAT54-07P6FILM order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BAT54-07P6FILM?
For technical support, including BAT54-07P6FILM datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BAT54-07P6FILM requirements.
6.How does Aetrix verify that BAT54-07P6FILM is sourced from the original manufacturer or authorized distributors?
All BAT54-07P6FILM products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BAT54-07P6FILM meets industry standards.
7.What is the process for return or replacement of BAT54-07P6FILM?
All BAT54-07P6FILM units undergo pre-shipment inspection (PSI). If there is an issue with BAT54-07P6FILM, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BAT54-07P6FILM part is unused and in its original packaging.
Return procedure for BAT54-07P6FILM:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BAT54-07P6FILM Tags
-
BAV99-7-F
Diodes Incorporated
-
BAT54C-7-F
Diodes Incorporated
-
BAV99,215
Nexperia USA Inc.
-
BAT54SLT1G
onsemi
-
BAV70LT1G
onsemi
-
BAT54CLT1G
onsemi
-
BAT54S-7-F
Diodes Incorporated
-
BAV99LT1G
onsemi
-
BAT54S,215
Nexperia USA Inc.
-
BAS40-04LT1G
onsemi
-
MMBD1503-TP
Micro Commercial Co
-
BAV99WT1G
onsemi
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
