My Inquiry
My Account
Nexperia USA Inc. BC856BS/DG/B2,115
- Part No.:
- BC856BS/DG/B2,115
- Manufacturer:
- Nexperia USA Inc.
- Category:
- Bipolar Transistor Arrays
- Package:
- 6-TSSOP, SC-88, SOT-363
- Datasheet:
-
BC856BS/DG/B2,115.pdf
- Description:
- TRANS 2PNP 65V 100MA 6-TSSOP
- Quantity:
- Payment:
- Shipping:
Inventory:9,181
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BC856BS/DG/B2,115 from Nexperia is a dual PNP general-purpose transistor pair in SOT363-3 (TSSOP6) package, rated for −65 V VCEO, −100 mA IC, and featuring hFE = 200–450 at −2 mA/−5 V. It delivers matched current gain, low VCE(sat) (−200 mV typ. @ −100 mA/−5 mA), and <2.3 pF collector capacitance - used in compact dual-switching circuits such as LED driver bias networks and complementary logic level shifters.
For engineers reviewing the BC856BS/DG/B2,115 datasheet, BC856BS/DG/B2,115 pinout, BC856BS/DG/B2,115 application, or BC856BS/DG/B2,115 equivalent, this page provides verified pin mapping, thermal derating curves, saturation voltage behavior across temperature, and validated alternatives for dual-transistor discrete replacement in space-constrained analog control stages.
Technical Context
This dual PNP transistor integrates two electrically isolated, closely matched transistors in a single TSSOP6 footprint. Each device supports independent biasing with no mutual interference, enabling precise current mirroring or differential switching without cross-coupling.
It operates within −55 °C to +150 °C ambient range, with Rth(j-a) = 416 K/W per device on FR4 PCB and Ptot = 300 mW max at Tamb ≤ 25 °C. Its fT ≥ 100 MHz at −10 mA/−5 V enables stable operation up to audio-frequency amplification and fast digital switching.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VCEO | −65 V - Supports rail-to-rail switching in −48 V telecom bias rails and industrial −24 V control systems. |
| IC | −100 mA - Sufficient drive capability for small-signal relays, optocoupler LEDs, and low-power MOSFET gate pre-drivers. |
| hFE | 200–450 @ −2 mA/−5 V - Enables high-current gain stability across production lots for consistent base drive sizing. |
| VCE(sat) | −200 mV typ. @ −100 mA/−5 mA - Minimizes conduction loss in saturated-switch applications like load switching and current limiting. |
| Cc | 2.3 pF - Reduces Miller effect and improves high-frequency response in amplifier and oscillator bias networks. |
| Ptot (per device) | 300 mW - Allows dual-transistor operation at full rating on standard FR4 PCB without forced cooling. |
Pinout & Package
SOT363-3 (TSSOP6) plastic surface-mounted package: 1.35 mm × 2.2 mm footprint, 0.65 mm pitch, 0.95 mm max height, lead-free and RoHS-compliant.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | Emitter of TR1 | Primary current sink node for first transistor; connects to local ground reference in common-emitter configurations. |
| 2 | Base of TR1 | Control input for TR1; requires current-limited drive due to VBE(sat) ≈ −0.75 V typical. |
| 3 | Collector of TR2 | Output node for second transistor; routed to load or next-stage input in cascode or push-pull arrangements. |
| 4 | Emitter of TR2 | Independent emitter return path for TR2; enables separate biasing from TR1 for differential operation. |
| 5 | Base of TR2 | Second independent control input; allows asynchronous or complementary switching relative to TR1. |
| 6 | Collector of TR1 | Main output of TR1; shares same functional role as Pin 3 but for first transistor - critical for dual-output logic gates. |
Key Features
| Feature | Design Value |
|---|---|
| Low collector-emitter saturation voltage | VCE(sat) ≤ −200 mV @ −100 mA ensures <20 mW conduction loss per transistor in switching mode. |
| Closely matched hFE | Typical gain spread <±5% between TR1 and TR2 enables accurate current mirroring without trimming resistors. |
| No mutual interference | Electrically isolated die structure eliminates crosstalk - essential for noise-sensitive analog signal paths. |
| Reduced board space | Dual-transistor integration cuts component count by 50% vs. discrete SOT23 pairs, saving ≥3.5 mm² PCB area. |
Applications
| LED Driver Bias Network | Complementary Logic Level Shifter |
|---|---|
Use Scenario: Biasing constant-current LED strings in portable instrumentation displays where space and thermal budget are constrained. IC Role / Device Role / Timing Role: Dual PNP pair acts as current-source mirror and active pull-down stage for PWM-controlled anode drivers. Use Value: Matched hFE ensures uniform LED brightness across channels; low VCE(sat) minimizes power dissipation in battery-powered operation. |
Use Scenario: Translating 3.3 V logic signals to −5 V or −12 V domains in legacy industrial interface modules. IC Role / Device Role / Timing Role: TR1 and TR2 operate as open-collector inverters with shared emitter pull-up, forming a bidirectional level-shifting pair. Use Value: Independent base control enables precise timing alignment; low Cc preserves edge integrity up to 10 MHz. |
| Dual-Channel Load Switch | Current Mirror Reference |
Use Scenario: Enabling/disabling two independent 100 mA sensor supply rails in automotive body control modules. IC Role / Device Role / Timing Role: Each transistor functions as a grounded-emitter high-side switch controlled via base current limiting. Use Value: −65 V rating accommodates load dump transients; thermal resistance of 416 K/W allows sustained operation at 85 °C ambient. |
Use Scenario: Generating matched reference currents for precision ADC biasing in medical sensor front-ends. IC Role / Device Role / Timing Role: TR1 configured as diode-connected reference; TR2 mirrors its collector current with minimal offset. Use Value: Gain matching reduces current error to <2% over −40 °C to +85 °C, eliminating need for laser-trimmed resistors. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar dual PNP transistor applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| BC857BS | VCEO = −45 V, hFE = 220–475, identical SOT363-3 package and pinout | Limited to lower-voltage rails (e.g., −24 V systems); unsuitable for −48 V telecom or industrial −60 V designs | Select when operating below −45 V and higher hFE tolerance is acceptable. |
| MBT3906DW1T1G | VCEO = −40 V, hFE = 100–300, SOT-363 package but different pin assignment (E-B-C-E-B-C vs. E-B-C-E-B-C layout matches) | Lower gain consistency and reduced voltage margin; pinout differs - requires PCB redesign | Choose only if cost sensitivity outweighs design reuse and performance requirements. |
Compared with BC856BS/DG/B2,115, BC857BS trades 20 V breakdown margin for slightly higher gain spread, while MBT3906DW1T1G sacrifices both voltage rating and pin compatibility - making BC856BS the optimal choice for −65 V robustness and drop-in dual-transistor integration.
Availability
BC856BS/DG/B2,115 is available at Aetrix Electronics and suitable for LED driver bias networks, complementary logic level shifters, dual-channel load switches, and current mirror references requiring stable component supply across automotive infotainment, industrial PLC I/O modules, and portable medical instrumentation.
Supply support for BC856BS/DG/B2,115 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Nexperia is a global semiconductor expert focused on high-volume, high-reliability discrete and logic devices, with leadership in automotive-qualified components and energy-efficient solutions.
The BC856BS belongs to Nexperia's general-purpose bipolar transistor family, engineered for space-constrained analog and digital switching applications where matched performance, thermal efficiency, and SMT manufacturability are critical.
FAQ
Is BC856BS/DG/B2,115 automotive qualified?
No. BC856BS/DG/B2,115 is not AEC-Q101 qualified and lacks automotive-specific testing or qualification documentation. It is intended for industrial, consumer, and computing applications. For automotive use, Nexperia offers the BC856BQ series, which undergoes full AEC-Q101 stress testing and includes PPAP documentation support.
What is the maximum allowable pulsed collector current?
The peak collector current ICM is −200 mA under single-pulse conditions with pulse width ≤ 1 ms and duty cycle ≤ 2%. This rating applies only when junction temperature remains within 150 °C, requiring adherence to the transient thermal impedance curve (Figure 2) and proper PCB copper area for heat dissipation.
Can BC856BS/DG/B2,115 replace BC846BS in NPN/NPN applications?
No. BC856BS is a PNP/PNP pair and is not functionally interchangeable with the NPN/NPN BC846BS. Attempting substitution would reverse polarity and cause circuit failure. The correct complement is BC846BS for NPN/NPN needs or BC846BPN for NPN/PNP mixed pairs - all share the same SOT363-3 package and pinout.
Does the marking code %E6 indicate date code or lot traceability?
The marking code %E6 encodes manufacturing site (% placeholder) and device type (E6), per Table 4. Date code and lot traceability are not embedded in the visible top-mark; full traceability requires scanning the barcode on the reel label or consulting the manufacturer's lot disposition report provided with shipment documentation.
BC856BS/DG/B2,115 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Nexperia USA Inc.
- Series:
- -
- Package/Case:
- 6-TSSOP, SC-88, SOT-363
- Packaging:
- Tape & Reel (TR)
- Product Status:
- Obsolete
- Transistor Type:
- 2 PNP (Dual)
- Current - Collector (Ic) (Max):
- 100mA
- Voltage - Collector Emitter Breakdown (Max):
- 65V
- Vce Saturation (Max) @ Ib, Ic:
- 300mV @ 5mA, 100mA
- Current - Collector Cutoff (Max):
- 15nA (ICBO)
- DC Current Gain (hFE) (Min) @ Ic, Vce:
- 200 @ 2mA, 5V
- Power - Max:
- 300mW
- Frequency - Transition:
- 100MHz
- Operating Temperature:
- 150°C (TJ)
- Grade:
- Automotive
- Qualification:
- AEC-Q101
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- 6-TSSOP
BC856BS/DG/B2,115 FAQ
1.How can I place an order for BC856BS/DG/B2,115 through Aetrix?
Please submit a Request for Quotation (RFQ) for BC856BS/DG/B2,115 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BC856BS/DG/B2,115 reliable?
The price and inventory of BC856BS/DG/B2,115 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BC856BS/DG/B2,115 is usually 5 days.
3.What payment methods are accepted for BC856BS/DG/B2,115?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BC856BS/DG/B2,115 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BC856BS/DG/B2,115?
BC856BS/DG/B2,115 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BC856BS/DG/B2,115 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BC856BS/DG/B2,115?
For technical support, including BC856BS/DG/B2,115 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BC856BS/DG/B2,115 requirements.
6.How does Aetrix verify that BC856BS/DG/B2,115 is sourced from the original manufacturer or authorized distributors?
All BC856BS/DG/B2,115 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BC856BS/DG/B2,115 meets industry standards.
7.What is the process for return or replacement of BC856BS/DG/B2,115?
All BC856BS/DG/B2,115 units undergo pre-shipment inspection (PSI). If there is an issue with BC856BS/DG/B2,115, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BC856BS/DG/B2,115 part is unused and in its original packaging.
Return procedure for BC856BS/DG/B2,115:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BC856BS/DG/B2,115 Tags
-
MBT3946DW1T1G
onsemi
-
BC846BPDW1T1G
onsemi
-
MBT2222ADW1T1G
onsemi
-
BC847BDW1T1G
onsemi
-
DMMT5401-7-F
Diodes Incorporated
-
DMMT5551-7-F
Diodes Incorporated
-
DMMT3904W-7-F
Diodes Incorporated
-
DMMT3906W-7-F
Diodes Incorporated
-
FMB3904
onsemi
-
FMB2222A
onsemi
-
ULQ2003D1013TR
STMicroelectronics
-
ZXTD4591E6TA
Diodes Incorporated
Tech Hub
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
Jumper cables guide covering safe connection order, red and black clamp placement, final ground connection, cable gauge, length, clamp quality, copper vs CCA cables, jump starter comparison and battery…
