My Inquiry
My Account
Renesas BCR20KM-12LB-AN#X6
- Part No.:
- BCR20KM-12LB-AN#X6
- Manufacturer:
- Renesas
- Category:
- TRIACs
- Package:
- -
- Datasheet:
-
BCR20KM-12LB-AN#X6.pdf
- Description:
- TRIAC
- Quantity:
- Payment:
- Shipping:
Inventory:16,573
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BCR20KM-12LB-AN#X6 from Renesas Electronics is a 20 A, 600 V insulated triac in TO-220FN package, rated for 150°C maximum junction temperature, with 2000 V isolation voltage and 30 mA gate trigger current - used for AC power control in vacuum cleaners, electric heaters, and light dimmers.
For engineers reviewing the BCR20KM-12LB-AN#X6 datasheet, BCR20KM-12LB-AN#X6 pinout, BCR20KM-12LB-AN#X6 application, or BCR20KM-12LB-AN#X6 equivalent, this page delivers verified triac specifications, thermal derating curves, gate trigger behavior across temperature, dv/dt immunity, and real-world control circuit guidance per Renesas' Rev.2.00 datasheet.
Technical Context
This triac operates in all four quadrants (I, II, III, IV) with symmetrical gate trigger characteristics, supporting phase-angle and zero-crossing control topologies. Its planar passivation structure ensures stable blocking performance up to 150°C junction temperature and 720 V non-repetitive peak off-state voltage.
It features high commutation robustness: critical dv/dt rating of 10 V/µs at 125°C and 1 V/µs at 150°C under inductive load conditions (di/dt = –10 A/ms), with thermal resistance Rth(j–c) = 2.0°C/W enabling reliable conduction at 20 A RMS with proper heatsinking.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDRM | 600 V - guarantees repetitive blocking capability in AC mains applications up to 240 V RMS with safety margin |
| IT(RMS) | 20 A - continuous RMS on-state current at Tc = 110°C, defining heatsink sizing baseline |
| Tj(max) | +150°C - extended junction temperature rating enables higher ambient operation vs. standard 125°C triacs |
| Viso | 2000 V AC - reinforced insulation between terminals and case supports Class I safety compliance in consumer appliances |
| IGT | 30 mA max - low gate trigger current reduces driver stage power loss and simplifies optocoupler selection |
| Rth(j–c) | 2.0°C/W - quantifies thermal path efficiency from junction to case, critical for calculating safe operating area |
| (dv/dt)c | 10 V/µs @ Tj=125°C - defines minimum snubber requirements for inductive loads like motor windings |
Pinout & Package
BCR20KM-12LB-AN#X6 uses the TO-220FN package: insulated plastic housing with metal tab (electrically isolated from terminals), 3-pin vertical through-hole outline, 2.0 g mass, and standardized EIAJ/JEDEC footprint.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| T1 | Main Terminal 1 | Anode-side main current path; connects to load return or neutral in single-phase AC circuits |
| T2 | Main Terminal 2 | Cathode-side main current path; connects to AC line input or hot side in phase-control configurations |
| Gate | Control Electrode | Triggers conduction when forward-biased relative to T1; polarity determines quadrant sensitivity (I/III preferred) |
Key Features
| Feature | Design Value |
|---|---|
| Insulated Package | 2000 V isolation enables direct mounting to grounded heatsinks without insulating washers |
| 150°C Junction Rating | Supports sustained 20 A RMS operation in compact enclosures where ambient exceeds 85°C |
| Planar Passivation | Improves long-term reliability under humidity and thermal cycling vs. mesa-structured triacs |
| Quadrant I/III Optimization | Guaranteed low IGT in I/III quadrants reduces gate drive complexity in standard optocoupler-based drivers |
| High Surge Withstand | 200 A non-repetitive surge (60 Hz, 1 cycle) accommodates motor startup inlets and transformer inrush |
Applications
| Vacuum Cleaner Motor Control | Electric Heater Power Regulation |
|---|---|
Use Scenario: Variable-speed suction control via phase-angle firing into universal motor. IC Role / Device Role / Timing Role: Main AC switching element triggered by zero-crossing detector and microcontroller PWM logic. Use Value: Enables smooth speed ramping and energy-efficient partial-load operation while maintaining EMI below CISPR-14 limits. | Use Scenario: Stepless heat output adjustment in residential convection heaters using resistive wire elements. IC Role / Device Role / Timing Role: Bidirectional AC switch controlled by thermostat-integrated timing IC or MCU with TRIAC driver. Use Value: Delivers precise thermal regulation with <±2°C stability and eliminates mechanical relay wear-out failure modes. |
| Light Dimmer Module | Copying Machine Paper Feed Drive |
Use Scenario: Leading-edge dimming of incandescent and halogen lamps in residential lighting systems. IC Role / Device Role / Timing Role: High-voltage AC switch synchronized to zero-crossing reference for clean phase-cut waveforms. Use Value: Achieves flicker-free dimming down to 5% brightness with minimal audible noise and no lamp filament stress. | Use Scenario: Clutch and roller motor sequencing in office copiers requiring timed AC power bursts. IC Role / Device Role / Timing Role: Duty-cycled AC power switch activated by logic-level signals from system controller. Use Value: Provides repeatable torque delivery and prevents paper jamming during high-speed feed cycles. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar triac-based AC power control applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STMicroelectronics BTB20-600B | Same 20 A/600 V rating, but 125°C Tj(max); TO-220AB (non-insulated) package requires isolation hardware | Lacks 2000 V isolation; unsuitable for direct heatsink mounting without mica washer | Select only if cost-sensitive and PCB layout allows added insulation components |
| ON Semiconductor MAC20M-600 | 20 A/600 V, 150°C Tj(max), but 1000 V Viso; TO-220AB package | Half the isolation voltage; requires external creepage/clearance reinforcement for Class I safety | Acceptable only in non-safety-critical industrial controls with full system-level isolation design |
Compared with BCR20KM-12LB-AN#X6, BTB20-600B trades isolation for lower cost and MAC20M-600 sacrifices isolation margin for broader distributor availability - neither matches the integrated safety, thermal headroom, and simplified thermal design of the Renesas insulated 150°C triac.
Availability
BCR20KM-12LB-AN#X6 is available at Aetrix Electronics and suitable for vacuum cleaner motor control, electric heater regulation, and light dimmer modules requiring stable component supply and long-lifecycle support.
Supply support for BCR20KM-12LB-AN#X6 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics Corporation is a Japanese semiconductor manufacturer specializing in microcontrollers, analog, power, and timing solutions for industrial, automotive, and consumer markets.
The BCR20KM-12LB-AN#X6 belongs to Renesas' insulated triac product line designed specifically for reliable, high-temperature AC power switching in safety-critical household appliances and office equipment.
FAQ
What is the maximum junction temperature rating for BCR20KM-12LB-AN#X6?
The BCR20KM-12LB-AN#X6 has a guaranteed maximum junction temperature of +150°C, confirmed in Renesas' Rev.2.00 datasheet. This exceeds standard triac ratings (typically +125°C), allowing operation in thermally constrained environments such as sealed appliance enclosures. Derating curves in the datasheet define allowable RMS current versus case temperature, ensuring safe conduction at 20 A up to Tc = 110°C.
Does BCR20KM-12LB-AN#X6 require an insulating washer when mounted to a heatsink?
No, BCR20KM-12LB-AN#X6 does not require an insulating washer because it uses the TO-220FN insulated package with 2000 V AC isolation between terminals and case. The metal tab is electrically isolated, enabling direct mounting to grounded heatsinks - a key design advantage over non-insulated TO-220AB variants like BTB20-600B.
What is the gate trigger current specification for BCR20KM-12LB-AN#X6?
The gate trigger current (IGT) for BCR20KM-12LB-AN#X6 is specified as ≤30 mA maximum at Tj = 25°C, VD = 6 V, RL = 6 Ω, and RG = 330 Ω (Test Procedure I). This low IGT value simplifies driver design and supports compatibility with common optocouplers such as MOC3021 or IL420 without additional amplification stages.
Can BCR20KM-12LB-AN#X6 be used in zero-crossing switching applications?
Yes, BCR20KM-12LB-AN#X6 supports zero-crossing switching due to its symmetrical gate trigger characteristics across quadrants I and III. When paired with a zero-crossing optocoupler (e.g., MOC3041), it enables low-EMI, low-dv/dt turn-on ideal for resistive loads like heaters and incandescent lamps - though phase-angle control remains viable for motor and dimmer use cases.
What is the critical rate of rise of off-state commutating voltage (dv/dt)c for BCR20KM-12LB-AN#X6?
The critical (dv/dt)c for BCR20KM-12LB-AN#X6 is 10 V/µs at Tj = 125°C and 1 V/µs at Tj = 150°C under inductive load conditions (di/dt = –10 A/ms). These values define the minimum snubber network (RC) required to prevent false triggering during commutation - especially critical in motor control and transformer-coupled applications.
BCR20KM-12LB-AN#X6 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- *
- Package/Case:
- -
- Packaging:
- Bulk
- Product Status:
- Active
- Triac Type:
- -
- Voltage - Off State:
- -
- Current - On State (It (RMS)) (Max):
- -
- Voltage - Gate Trigger (Vgt) (Max):
- -
- Current - Non Rep. Surge 50, 60Hz (Itsm):
- -
- Current - Gate Trigger (Igt) (Max):
- -
- Current - Hold (Ih) (Max):
- -
- Configuration:
- -
- Operating Temperature:
- -
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- -
- Supplier Device Package:
- -
BCR20KM-12LB-AN#X6 FAQ
1.How can I place an order for BCR20KM-12LB-AN#X6 through Aetrix?
Please submit a Request for Quotation (RFQ) for BCR20KM-12LB-AN#X6 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BCR20KM-12LB-AN#X6 reliable?
The price and inventory of BCR20KM-12LB-AN#X6 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BCR20KM-12LB-AN#X6 is usually 5 days.
3.What payment methods are accepted for BCR20KM-12LB-AN#X6?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BCR20KM-12LB-AN#X6 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BCR20KM-12LB-AN#X6?
BCR20KM-12LB-AN#X6 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BCR20KM-12LB-AN#X6 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BCR20KM-12LB-AN#X6?
For technical support, including BCR20KM-12LB-AN#X6 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BCR20KM-12LB-AN#X6 requirements.
6.How does Aetrix verify that BCR20KM-12LB-AN#X6 is sourced from the original manufacturer or authorized distributors?
All BCR20KM-12LB-AN#X6 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BCR20KM-12LB-AN#X6 meets industry standards.
7.What is the process for return or replacement of BCR20KM-12LB-AN#X6?
All BCR20KM-12LB-AN#X6 units undergo pre-shipment inspection (PSI). If there is an issue with BCR20KM-12LB-AN#X6, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BCR20KM-12LB-AN#X6 part is unused and in its original packaging.
Return procedure for BCR20KM-12LB-AN#X6:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BCR20KM-12LB-AN#X6 Tags
-
Z0103NN5AA4
STMicroelectronics
-
Z0107MNT1G
Littelfuse Inc.
-
Z0103MNT1G
Littelfuse Inc.
;;2.jpg)
-
T405-800B-TR
STMicroelectronics
-
T835-600B-TR
STMicroelectronics
.JPG)
-
2N6073BG
Littelfuse Inc.
-
2N6075BG
Littelfuse Inc.
-
BTA08-600CWRG
STMicroelectronics
-
T835H-6G-TR
STMicroelectronics
-
BTA16-800BRG
STMicroelectronics
-
T1210-800G-TR
STMicroelectronics
-
MAC4DHMT4G
Littelfuse Inc.
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
