My Inquiry
My Account
Renesas BCR4AS-16LH#B00
- Part No.:
- BCR4AS-16LH#B00
- Manufacturer:
- Renesas
- Category:
- TRIACs
- Package:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Datasheet:
-
BCR4AS-16LH#B00.pdf
- Description:
- TRIAC 800V 4A MP3A
- Quantity:
- Payment:
- Shipping:
Inventory:2,843
Please send an inquiry. Send us your inquiry, and we will respond immediately.
Product details
Overview
BCR4AS-16LH#B00 from Renesas Electronics is a planar passivated 800 V, 4 A RMS triac designed for medium-power AC phase-control applications. It delivers 30 A non-repetitive surge current, supports 150 °C junction operation, and features high commutation capability with critical di/dt of 2.5–3.0 A/ms under inductive load conditions - used in heater and small motor control circuits.
For engineers reviewing the BCR4AS-16LH#B00 datasheet, BCR4AS-16LH#B00 pinout, BCR4AS-16LH#B00 application, or BCR4AS-16LH#B00 equivalent, key selection criteria include gate trigger current (10–35 mA), thermal resistance (3.8 °C/W), repetitive off-state voltage (800 V), and MP-3A package compatibility with heatsink-mounting T2 tab.
Technical Context
This triac operates in all four quadrants with verified I/III quadrant triggering behavior and exhibits stable latching/holding current across –40 to +150 °C. Its gate trigger voltage remains ≤1.5 V at 25 °C with 6 V applied, and gate non-trigger voltage stays ≤0.1 V at 150 °C - ensuring noise immunity in noisy AC environments.
The device uses planar passivation for enhanced reliability and achieves high commutation robustness via optimized semiconductor structure, supporting reliable turn-off under inductive loads with dv/dt up to 100 V/μs and di/dt decay rates ≥2.5 A/ms - critical for solid-state relay and dimmer designs.
Key Specifications
| Parameter | Value and Actual Design Meaning |
|---|---|
| VDRM | 800 V - blocks full mains voltage surges in 230 VAC systems with safety margin |
| IT (RMS) | 4 A - sustains continuous load current for fan motors, heating elements, and solenoids |
| ITSM | 30 A - handles brief inrush currents during cold-start of resistive/inductive loads |
| Tj max | +150 °C - enables operation in enclosed industrial enclosures without forced cooling |
| Rth(j-c) | 3.8 °C/W - allows thermal design with standard heatsinks when mounted on T2 tab |
| (di/dt)c | 2.5–3.0 A/ms - ensures reliable commutation with typical 50/60 Hz inductive loads |
| IGT (max) | 35 mA - compatible with low-power microcontroller GPIO or optocoupler drivers |
Pinout & Package
Package: MP-3A (JEITA SC-63 / Renesas PRSS0004ZG-A), surface-mountable with isolated T2 tab for heatsink attachment. Case temperature measured directly on T2 tab per datasheet Note 3.
| Pin/Terminal | Circuit Role | Design Meaning |
|---|---|---|
| 1 | T1 Terminal | Main anode 1 - connects to load side of AC line; current flows into device during conduction |
| 2 & 4 | T2 Terminal | Main anode 2 - common high-current path with integrated heatsink tab; electrically tied internally |
| 3 | Gate Terminal | Control input - triggers conduction when pulse exceeds IGT threshold; referenced to T2 |
Key Features
| Feature | Design Value |
|---|---|
| High Commutation | Rated (di/dt)c = 2.5–3.0 A/ms ensures reliable turn-off with inductive loads like motors and transformers |
| Planar Passivation | Enhances long-term stability and moisture resistance in humid or industrial environments |
| Quadrant Flexibility | Verified I/III quadrant triggering enables simplified gate drive circuitry using standard optocouplers |
| Low VGD | Gate non-trigger voltage ≤0.1 V at 150 °C prevents false triggering from thermal leakage current |
| Standard Packing | Tubed format (75 pcs) supports manual prototyping and low-volume production builds |
Applications
| Heater Control | Fan Motor Control |
|---|---|
Use Scenario: Phase-angle controlled heating in commercial ovens and HVAC duct heaters. IC Role / Device Role / Timing Role: Main AC power switch triggered synchronously with zero-crossing detection. Use Value: Enables precise thermal regulation with 4 A RMS handling and 800 V blocking for 230 VAC mains. |
Use Scenario: Speed-controlled AC induction fans in industrial ventilation systems. IC Role / Device Role / Timing Role: Bidirectional AC switch modulating conduction angle to adjust torque and airflow. Use Value: Supports 30 A surge for motor startup and maintains stable operation up to 150 °C ambient. |
| Solid-State Relay Module | Light Dimmer Circuit |
Use Scenario: PCB-mounted SSR replacing electromechanical relays in PLC output modules. IC Role / Device Role / Timing Role: Isolated main switching element driven by optocoupled gate signal. Use Value: Delivers 3.8 °C/W thermal resistance for compact heatsink integration and 2.5 A/ms di/dt rating for inductive load switching. |
Use Scenario: Leading-edge dimmer for incandescent/halogen lamps in residential lighting. IC Role / Device Role / Timing Role: AC line switch triggered after programmable delay from zero-crossing. Use Value: Gate trigger current ≤35 mA allows direct drive from MCU GPIO via current-limiting resistor. |
Equivalent & Alternatives
The following parts are listed as comparable options for similar triac switching applications.
| Alternative Part | Technical Difference | Application Difference | Selection Advice |
|---|---|---|---|
| STMicroelectronics BT138-600E | 600 V VDRM, 8 A IT(RMS), TO-220 package, higher IGT (50 mA max) | Higher current rating but lower voltage margin; requires larger heatsink due to TO-220 Rth(j-c) ≈ 2.5 °C/W | Select when >4 A load current is needed and 600 V blocking suffices for 120 VAC systems |
| ON Semiconductor MAC4D16G | 600 V VDRM, 4 A IT(RMS), DPAK package, IGT ≤35 mA, Rth(j-c) = 4.5 °C/W | Same current rating but lower voltage rating and higher thermal resistance limits power density | Prefer for space-constrained SMT layouts where MP-3A footprint is unavailable, accepting reduced thermal headroom |
Compared with BCR4AS-16LH#B00, BT138-600E offers higher current capacity but sacrifices 200 V blocking margin and requires different mounting; MAC4D16G matches RMS current but trades off voltage rating and thermal performance for smaller footprint.
Availability
BCR4AS-16LH#B00 is available at Aetrix Electronics and suitable for heater control, fan motor control, and solid-state relay design requiring stable component supply and consistent MP-3A packaging.
Supply support for BCR4AS-16LH#B00 includes scheduled delivery planning, volume procurement assistance, BOM continuity management, traceable sourcing, and lifecycle availability coordination for OEM customers, industrial embedded developers, connected-device designers, and electronics production programs.
Manufacturer
Renesas Electronics is a global semiconductor leader delivering microcontrollers, analog, power, and timing solutions for industrial, automotive, and infrastructure markets.
The BCR4AS-16LH#B00 belongs to Renesas' medium-power discrete triac family, engineered for reliable AC power control in cost-sensitive industrial and consumer equipment where thermal robustness and quadrants I/III compatibility are essential.
FAQ
What is the maximum junction temperature rating for BCR4AS-16LH#B00?
The BCR4AS-16LH#B00 has a maximum junction temperature (Tj) rating of +150 °C, validated per datasheet Absolute Maximum Ratings table. This allows sustained operation in thermally demanding environments such as enclosed control panels or high-ambient industrial settings. Derating curves in the datasheet confirm allowable RMS current versus case temperature, with full 4 A rating maintained at Tc = 129 °C.
Does BCR4AS-16LH#B00 support all four quadrants of triac triggering?
The BCR4AS-16LH#B00 is characterized for I and III quadrant triggering per datasheet Electrical Characteristics table and Gate Trigger Characteristics Test Circuits. While it can conduct in all four quadrants, only I and III quadrant gate trigger parameters (VFGT, VRGT, IFGT, IRGT) are specified and guaranteed. Quadrant II/IV triggering behavior is not documented and should not be relied upon in production designs.
What is the thermal resistance from junction to case for BCR4AS-16LH#B00?
The junction-to-case thermal resistance (Rth(j-c)) of BCR4AS-16LH#B00 is 3.8 °C/W, measured with case temperature taken at the T2 tab per datasheet Note 3. This value enables accurate heatsink sizing for continuous 4 A operation - for example, a 10 °C/W heatsink yields ~13.8 °C/W total thermal resistance, limiting junction rise to ~55 °C at full load with 25 °C ambient.
Can BCR4AS-16LH#B00 replace BCR4AS-16LH-1#B00 in a design?
Yes - BCR4AS-16LH#B00 and BCR4AS-16LH-1#B00 share identical electrical specifications except for IGT item designation: the "-1" suffix denotes guaranteed ≤10 mA gate trigger current, while standard BCR4AS-16LH#B00 specifies ≤35 mA. Both meet 800 V VDRM, 4 A IT(RMS), and MP-3A packaging. Use BCR4AS-16LH#B00 unless strict low-IGT compliance is required.
What is the surge current rating of BCR4AS-16LH#B00 and how is it defined?
The BCR4AS-16LH#B00 has a non-repetitive surge on-state current (ITSM) rating of 30 A, defined as the peak value of a single 60 Hz sine-wave half-cycle (16.7 ms) under specified test conditions. This rating supports inrush current handling for resistive loads like heaters and cold-start currents for small AC motors, provided surge events remain infrequent and within the I²t limit of 3.7 A²s.
BCR4AS-16LH#B00 Specifications
- Product attributes
- Attribute value
- Manufacturer:
- Renesas
- Series:
- -
- Package/Case:
- TO-252-3, DPAK (2 Leads + Tab), SC-63
- Packaging:
- Tube
- Product Status:
- Discontinued at Digi-Key
- Triac Type:
- Standard
- Voltage - Off State:
- 800 V
- Current - On State (It (RMS)) (Max):
- 4 A
- Voltage - Gate Trigger (Vgt) (Max):
- 1.5 V
- Current - Non Rep. Surge 50, 60Hz (Itsm):
- 30A @ 60Hz
- Current - Gate Trigger (Igt) (Max):
- 35 mA
- Current - Hold (Ih) (Max):
- -
- Configuration:
- Single
- Operating Temperature:
- -40°C ~ 150°C (TJ)
- Grade:
- -
- Qualification:
- -
- Mounting Type:
- Surface Mount
- Supplier Device Package:
- MP-3A
BCR4AS-16LH#B00 FAQ
1.How can I place an order for BCR4AS-16LH#B00 through Aetrix?
Please submit a Request for Quotation (RFQ) for BCR4AS-16LH#B00 on Aetrix. Our sales agent will provide a competitive quotation and guide you through the order confirmation once you accept the terms.
2.Are the price and stock information for BCR4AS-16LH#B00 reliable?
The price and inventory of BCR4AS-16LH#B00 are updated periodically and may fluctuate due to market conditions. Stock and pricing data are typically refreshed every 24 hours. Quotation validity for BCR4AS-16LH#B00 is usually 5 days.
3.What payment methods are accepted for BCR4AS-16LH#B00?
We accept Wire Transfer, PayPal, Credit Card, Western Union, MoneyGram, and Escrow for BCR4AS-16LH#B00 transactions.
Note: Certain payment methods may incur a processing fee.
4.How is shipping managed for BCR4AS-16LH#B00?
BCR4AS-16LH#B00 orders can be shipped via leading logistics carriers, including DHL, UPS, FedEx, TNT, or Registered Mail.
Once your BCR4AS-16LH#B00 order is processed, you will receive an email with the shipment details and tracking number.
Note: Tracking information may take up to 24 hours to appear. Express delivery typically takes 3–5 business days.
5.How can I obtain technical support or documentation for BCR4AS-16LH#B00?
For technical support, including BCR4AS-16LH#B00 datasheets, pinout diagrams, or application guidance, please contact our engineering support team. They can provide detailed documentation and assistance for your BCR4AS-16LH#B00 requirements.
6.How does Aetrix verify that BCR4AS-16LH#B00 is sourced from the original manufacturer or authorized distributors?
All BCR4AS-16LH#B00 products on Aetrix are procured from qualified distributors and authorized channels. Our dedicated quality assurance team conducts strict verification, including traceability checks and, if necessary, third-party testing. This ensures that BCR4AS-16LH#B00 meets industry standards.
7.What is the process for return or replacement of BCR4AS-16LH#B00?
All BCR4AS-16LH#B00 units undergo pre-shipment inspection (PSI). If there is an issue with BCR4AS-16LH#B00, returns or replacements are accepted under the following conditions:
1.Quantity discrepancies, incorrect items, or visible external defects (such as breakage or corrosion), acknowledged by Aetrix.
2.The issue is reported within 90 days of delivery.
3.The BCR4AS-16LH#B00 part is unused and in its original packaging.
Return procedure for BCR4AS-16LH#B00:
1.Submit a request within 90 days.
2.Obtain a Return Material Authorization (RMA) from Aetrix.
BCR4AS-16LH#B00 Tags
-
Z0103NN5AA4
STMicroelectronics
-
Z0107MNT1G
Littelfuse Inc.
-
Z0103MNT1G
Littelfuse Inc.
;;2.jpg)
-
T405-800B-TR
STMicroelectronics
-
T835-600B-TR
STMicroelectronics
.JPG)
-
2N6073BG
Littelfuse Inc.
-
2N6075BG
Littelfuse Inc.
-
BTA08-600CWRG
STMicroelectronics
-
T835H-6G-TR
STMicroelectronics
-
BTA16-800BRG
STMicroelectronics
-
T1210-800G-TR
STMicroelectronics
-
MAC4DHMT4G
Littelfuse Inc.
Tech Hub
TTL and CMOS logic families differ in thresholds, loading, output drive, power and timing. This engineering guide compares 74HC and 74HCT, calculates noise margins and checks 3.3 V/5 V compatibility.
A practical engineering guide to 3.3V and 5V logic compatibility, input thresholds, resistor dividers, translator ICs, MOSFET level shifting, I2C pull-ups, timing limits and power-sequencing risks.
The 74HC595 uses push-pull logic outputs, while the TPIC6B595 uses 50 V open-drain DMOS sinks for higher-power loads. This guide compares timing, current limits, 3.3 V interfacing, load wiring, thermal…
The 74HC595 converts serial data into eight stable parallel outputs. This guide covers pin functions, shift and storage timing, OE and MR behavior, drive-current limits, cascading, voltage compatibilit…
A technical comparison of level-sensitive latches and edge-triggered flip-flops, covering timing windows, setup and hold limits, master–slave operation, time borrowing, race-through, HDL inference and…
A D latch stores one bit while Enable controls when data can pass. This reference covers gate-level operation, truth tables, transparency, setup and hold timing, LE versus OE, common ICs and practical …
An SR latch stores one bit through cross-coupled feedback. This engineering reference covers NOR and NAND implementations, truth tables, forbidden-state recovery, gated operation, switch debouncing, fa…
Latch circuits retain one bit through feedback. This technical reference covers SR and D latches, truth tables, transparency, timing limits, latch-versus-flip-flop behavior, applications and common log…
An engineering guide to LED driver operation, constant-current and constant-voltage outputs, linear and switching topologies, dimming, IC selection, calculations, replacement compatibility, and fault c…
Operational amplifier guide covering op amp basics, feedback, ideal vs real op amps, common configurations, buffer circuits, offset, bias current, gain-bandwidth, slew rate, rail-to-rail limits and sel…
